Used Samsung Magician to clone SER6 6800H 500gb ssd to 2tb Samsung ssd and no boot. Error message on no windows. If I plug the original 500gb ssd which is now in an enclosure, into the 'C' port, machine will boot, but I cannot run ANY appl See attached image
It has been resolved. Apparently Samsung Magician failed to complete the cloning accurately. Reinstalled original ssd, wiped the 2tb ssd and used Macrium to complete cloning successfully.
tzsolt replied at 2023-04-06 03:31
If I want to replace the original NVME SSD with a new one (2TB) what is the best and easiest metho ...
If you don't mind, just replace and reinstall from scratch, from what I seen Macrium doesn't offer free version anymore. And installing from scratch is much better, you avoid a lot of problems that may come from old system. Windows will activate automatically when you are online.
Unfortunatelly we need the old system cloning... I found Macrium Reflect for free - older version. But how I could clone the old ssd I meed a pendrive in the usb connector to copy to and then I put the new ssd in the Ser6 and I use an usb running Macrium which will copythe old ssd system from usb pendrive to the new nvme ssd?
Sorry for my english.
You need a working system for Macrium, so you have to clone the old ssd on the new nvme, after that you expand the partition or make new partitions after new system boots. You can use a sata/nvme adapter for this, which is on usb3. Is very important to use an adapter that knows both protocols.
发表于 2023-03-10 04:30:15
楼主
发表于 2023-03-10 17:26:56
