Procon Probe Loop Detector Kit

Procon Probe Loop Detector Kit

(13 customer reviews)

£159.99 Ex VAT (£191.99 Including VAT)

Free UK mainland delivery on orders over £100 (1 - 2 working days)

UK MAINLAND DELIVERY ONLY

Procon Probe Magnetic Vehicle Detector Kit

Includes 1 x Probe & 1 x Controller

Can Be Set To Presence or Pulse

15 Metre Fly Lead included

 

Instruction Manuals and Downloads

    Your question to us

    Bulk Discount Available

    3 - 4 Units       4% off
    5 - 9 Units       5% off
    10 + Units       6% off
    SKU: MD102C-KIT Categories: , , Tag:

    Description

    The Procon Probe Loop Detector Kit can measure the magnetic field in 3 axis, namely the X, Y, and Z axis. Each axis can be individually enabled to optimise vehicle detection. Normally all 3 axis would be enabled.

    The MD102 probe can be buried in the road surface underneath the vehicle, alongside the vehicle or can be mounted above the ground next to the passage of the vehicle. The probe can be used to produce a pulse output or a presence out. The presence out will detect the vehicle indefinitely.

    The MD102C is a control unit which enables configuration and testing of the MD102. DIP switches are used for configuration and LED’s are used for visual indications of the operation of the probe. A relay output switches ON when a vehicle is detected. The MD102 has been designed for parking and access control applications and is a cost-effective solution for detecting vehicles in order to facilitate the automatic opening of security gates. It requires a minimal amount of cutting in the road surface.

    • Easy to install – no need to cut induction loops
    • Quality brand, guaranteed reliability
    • 15m Cable
    • Easy to set up controller with LED detection indicator Can be used for presence and pulse

    Technical information about the Procon Probe Loop Detector Kit:

    • 12/24Vdc Power input
    • Adjustable sensitivity
    • Adjustable detection zone, X,Y and Z axis
    • Can be installed underground or on static post/side of a driveway
    • 5 Minute presence reset
    • NOTE: If post mounted needs to be less than 1500mm from passing vehicle

    To see our full range of induction loops click here

    For more information for the manufacturer please click here

     

     

    Instruction Manuals and Downloads

    Instruction Manual

    Returns Policy

    Returns – You may cancel the contract at any time up to the end of 14 Calender days after you receive the goods, providing the goods have not been fitted or modified in any way and providing they are returned with the original packaging and providing the goods are in a resalable condition. To cancel the contract you must contact the Supplier in writing by Email or Post. Please note that you will be responsible for the safe return of the goods at your own expense.

    Goods returned as unsuitable will usually be changed for suitable ones, general returned goods are subject to a 15 – 20% restocking fee dependant on order value.

    The goods must be returned to the registered address of the Supplier via a trackable means and within 14 days of cancelation. Once the goods have been returned or for orders not dispatched, the Supplier will refund you within 30 days. If you fail to return the goods as required, the Supplier may charge you a sum not exceeding the direct costs of recovering the goods.

    13 reviews for Procon Probe Loop Detector Kit

    1. Anonymous (verified owner) –

      Super quick delivery

    2. steven Ford (verified owner) –

      What an excellent product. Very impressed. Will buy again!

    3. Malcolm Bloomfield (verified owner) –

    4. Jon Haines (verified owner) –

      Great service, very helpful and quick delivery.

    5. Philip R. (verified owner) –

      Product does the job well (much better than an induction loop). Easy to use the probe and controller to replace a failed induction loop. Cable can be extended (with care) if the probe needs to be a long way from the controller location (we used direct burial cat 6 with a pair for data, a pair for power, a single for the pulse, and the remaining 3 wires to carry the ground to extend the cable for out application).

      If using the controller all 5 (plus earth) cables need to be connected or it will show a fault. However, it is possible to use the probe directly (3 wires plus earth) if you had another suitable controller or relay/logic to capture the pulse generated on the white wire when a vehicle goes over the probe.

    6. Jason Whittaker (verified owner) –

      Great service yet again

    7. Anonymous (verified owner) –

    8. Trevor Gibbs (verified owner) –

    9. Malcolm Bloomfield (verified owner) –

    10. Adam (verified owner) –

      So much easier than a loop to install, great.

    11. Robert S. (verified owner) –

      Great service, advice and price, have used this company for many years now and will do for many more, cheers.

    12. dale buckwell (verified owner) –

      5 star service as always

    13. Mark L. (verified owner) –

      Quick delivery, thanks guys 👍

    Add a review

    Your email address will not be published. Required fields are marked *

    Related products