License plate screw inserts

[rfpowerdude]

Anyone know where is a good source for these? They are the license plate inserts that accept the license plate screws for Gs.

 

[airboatgreg]

The white square thing. Pretty available at ebay or parts place. Some come with the coated screws. I use stainless. Not thread specific

 

[spidereyes455]

Not sure if replacements for the black one are readily available but the white one should be available at any parts store mabey even the dorman help isle.

 

[rfpowerdude]

The dark blue one is the one that is used as a pulldown for the fuel door/license plate holder. The white one is the other one. There are also white ones on the front bumper for the front plate holder. However, Advance had some Dorman "Help" ones that are the wrong size. Way to big to fit in the holes...

 

[Bonnewagon]

The AutoZone by me has a HUGE selection of the white ones. All different sizes.

 

[69hurstolds]

Do you need ALL of that stuff?

The blue hook thingie is actually black. Should be. It's GM p/n 14068832 and tough as all get out to find.
If you need one, I might can see what I can drag up.

The parts book (see below) shows front ones as 559547 but those are round ones that fit in square pegs. Shows 82-88 G-body. Hmm. Weird.

https://www.amazon.com/dp/B0040D2SN0/?tag=gbody-20

Ebay has some you can buy for a few bucks per set.

I also drug up A-body p/n 3907444, like the white square ones like you got there.

 

[69hurstolds]

Oh, and the 3907444 GM part number cross references to Dorman 961-351 if that helps.

 

[vanrah]

Greetings Power Dude & all; If all else fails I think I have some white ones? So if ya cant find any measure (the square) the old one ya have & I'll look for ya. Ole' Bob.

 

[CaliWagon83]

I second Bonnewagon. AutoZone has a good selection of them.

 

[rfpowerdude]

Thanks Mike and others, I will check out Autozone first then if all else fails, I will get back here to see what y'all have.