eboot.c

/* Copyright (c) 2015-2016 Ivan Grokhotkov. All rights reserved.
 * This file is part of eboot bootloader.
 *
 * Redistribution and use is permitted according to the conditions of the
 * 3-clause BSD license to be found in the LICENSE file.
 */


#include <stddef.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include "flash.h"
#include "eboot_command.h"
#include <uzlib.h>


#define SWRST do { (*((volatile uint32_t*) 0x60000700)) |= 0x80000000; } while(0);

/*
  After Power Enable Pin, EXT_RST, or HWDT event, at "main()" in eboot, WDT is
  disabled. Key WDT hardware registers are zero.

  After "ESP.restart()" and other soft restarts, at "main()" in eboot, WDT is enabled.

  References for the under-documented ets_wdt_* API
    https://mongoose-os.com/blog/esp8266-watchdog-timer/
    http://cholla.mmto.org/esp8266/bootrom/boot.txt

  After looking at esp8266-watchdog-timer some more, `ets_wdt_enable(4, 12, 12)`
  is good for eboot's needs. From a ".map" the NON-OS SDK does not use the
  ets_wdt_* APIs, so our choices are not too critical.
  The SDK will set up the WDT as it wants it.

  A rationale for keeping the "ets_wdt_enable()" line, if the system is not
  stable during a "soft restart," the HWDT would provide a recovery reboot.
*/
extern void ets_wdt_enable(uint32_t mode, uint32_t arg1, uint32_t arg2);
/*
  "ets_wdt_disable"

  Diables WDT, then feeds the dog.
  For current modes other than 1 or 2, returns the current mode.
  For current mode 1, calls ets_timer_disarm, then return the current mode.
  For current mode 2, calls ets_isr_mask, then return the current mode.

  I always see a return value of 0xFFFFFFFF.

  The return value would normally be used with ets_wdt_restore; however, that is
  not an option since a valid prior call to ets_wdt_enable() may not have been done.
*/
extern uint32_t ets_wdt_disable(void);

int print_version(const uint32_t flash_addr)
{
    uint32_t ver;
    if (SPIRead(flash_addr + APP_START_OFFSET + sizeof(image_header_t) + sizeof(section_header_t), &ver, sizeof(ver))) {
        return 1;
    }
    ets_printf("v%08x\n", ver);
    return 0;
}

int load_app_from_flash_raw(const uint32_t flash_addr)
{
    image_header_t image_header;
    uint32_t pos = flash_addr + APP_START_OFFSET;

    if (SPIRead(pos, &image_header, sizeof(image_header))) {
        return 1;
    }
    pos += sizeof(image_header);


    for (uint32_t section_index = 0;
        section_index < image_header.num_segments;
        ++section_index)
    {
        section_header_t section_header = {0};
        if (SPIRead(pos, &section_header, sizeof(section_header))) {
            return 2;
        }
        pos += sizeof(section_header);

        const uint32_t address = section_header.address;

        bool load = false;

        if (address < 0x40000000) {
            load = true;
        }

        // The final IRAM size, once boot has completed, can be either 32K or 48K.
        // Allow for the higher in range testing.
        if (address >= 0x40100000 && address < 0x4010C000) {
            load = true;
        }

        if (address >= 0x60000000) {
            load = true;
        }

        if (!load) {
            pos += section_header.size;
            continue;
        }

        if (SPIRead(pos, (void*)address, section_header.size))
            return 3;

        pos += section_header.size;
    }

    asm volatile("" ::: "memory");
    asm volatile ("mov.n a1, %0\n"
        "mov.n a3, %1\n"
        "jx a3\n" : : "r" (0x3ffffff0), "r" (image_header.entry) );

    __builtin_unreachable(); // Save a few bytes by letting GCC know no need to pop regs/return
    return 0;
}

uint8_t read_flash_byte(const uint32_t addr)
{
    uint8_t __attribute__((aligned(4))) buff[4];
    SPIRead(addr & ~3, buff, 4);
    return buff[addr & 3];
}
unsigned char __attribute__((aligned(4))) uzlib_flash_read_cb_buff[4096];
uint32_t uzlib_flash_read_cb_addr;
int uzlib_flash_read_cb(struct uzlib_uncomp *m)
{
    m->source = uzlib_flash_read_cb_buff;
    m->source_limit = uzlib_flash_read_cb_buff + sizeof(uzlib_flash_read_cb_buff);
    SPIRead(uzlib_flash_read_cb_addr, uzlib_flash_read_cb_buff, sizeof(uzlib_flash_read_cb_buff));
    uzlib_flash_read_cb_addr += sizeof(uzlib_flash_read_cb_buff);
    return *(m->source++);
}

unsigned char gzip_dict[32768];
uint8_t buffer2[FLASH_SECTOR_SIZE]; // no room for this on the stack

int copy_raw(const uint32_t src_addr,
             const uint32_t dst_addr,
             const uint32_t size,
             const bool verify)
{
    // require regions to be aligned
    if ((src_addr & 0xfff) != 0 ||
        (dst_addr & 0xfff) != 0) {
        return 1;
    }

    const uint32_t buffer_size = FLASH_SECTOR_SIZE;
    uint8_t buffer[buffer_size];
    int32_t left = ((size+buffer_size-1) & ~(buffer_size-1));
    uint32_t saddr = src_addr;
    uint32_t daddr = dst_addr;
    struct uzlib_uncomp m_uncomp;
    bool gzip = false;

    // Check if we are uncompressing a GZIP upload or not
    if ((read_flash_byte(saddr) == 0x1f) && (read_flash_byte(saddr + 1) == 0x8b)) {
        // GZIP signature matched.  Find real size as encoded at the end
        left = read_flash_byte(saddr + size - 4);
        left += read_flash_byte(saddr + size - 3)<<8;
        left += read_flash_byte(saddr + size - 2)<<16;
        left += read_flash_byte(saddr + size - 1)<<24;

        uzlib_init();

        /* all 3 fields below must be initialized by user */
        m_uncomp.source = NULL;
        m_uncomp.source_limit = NULL;
        uzlib_flash_read_cb_addr = src_addr;
        m_uncomp.source_read_cb = uzlib_flash_read_cb;
        uzlib_uncompress_init(&m_uncomp, gzip_dict, sizeof(gzip_dict));

        int res = uzlib_gzip_parse_header(&m_uncomp);
        if (res != TINF_OK) {
            return 5; // Error uncompress header read
        }
	gzip = true;
    }
    while (left > 0) {
        if (!gzip) {
            if (SPIRead(saddr, buffer, buffer_size)) {
                return 3;
            }
        } else {
            m_uncomp.dest_start = buffer;
            m_uncomp.dest = buffer;
            int to_read = (left > buffer_size) ? buffer_size : left;
            m_uncomp.dest_limit = buffer + to_read;
            int res = uzlib_uncompress(&m_uncomp);
            if ((res != TINF_DONE) && (res != TINF_OK)) {
                return 6;
            }
            // Fill any remaining with 0xff
            for (int i = to_read; i < buffer_size; i++) {
                buffer[i] = 0xff;
            }
        }
        if (verify) {
            if (SPIRead(daddr, buffer2, buffer_size)) {
                return 4;
            }
            if (memcmp(buffer, buffer2, buffer_size)) {
                return 9;
            }
        } else {
            // Special treatment for address 0 (bootloader).  Only erase and
            // rewrite if the data is different (i.e. very rarely).
            bool skip = false;
            if (daddr == 0) {
                if (SPIRead(daddr, buffer2, buffer_size)) {
                    return 4;
                }
                if (!memcmp(buffer2, buffer, buffer_size)) {
                    ets_putc('B'); // Note we skipped the bootloader in output
                    skip = true;   // And skip erase/write
                }
            }
            if (!skip) {
                if (SPIEraseSector(daddr/buffer_size)) {
                   return 2;
                }
                if (SPIWrite(daddr, buffer, buffer_size)) {
                    return 4;
                }
            }
        }
        saddr += buffer_size;
        daddr += buffer_size;
        left  -= buffer_size;
    }

    return 0;
}

int main()
{
    int res = 9;
    bool clear_cmd = false;
    struct eboot_command cmd;

// BSS init commented out for now to save space.  If any static variables set
// to 0 are used, need to uncomment it or else the BSS will not be cleared and
// the static vars will power on with random values.
#if 0
    // Clear BSS ourselves, we don't have handy C runtime
    extern char _bss_start;
    extern char _bss_end;
    ets_bzero(&_bss_start, &_bss_end - &_bss_start);
#endif

    print_version(0);

    if (eboot_command_read(&cmd) == 0) {
        // valid command was passed via RTC_MEM
        clear_cmd = true;
        ets_putc('@');
    } else {
        // no valid command found
        cmd.action = ACTION_LOAD_APP;
        cmd.args[0] = 0;
        ets_putc('~');
    }

    if (cmd.action == ACTION_COPY_RAW) {
        ets_printf("cp:");

        ets_wdt_disable();
        res = copy_raw(cmd.args[0], cmd.args[1], cmd.args[2], false);
        ets_wdt_enable(4, 12, 12);  // WDT about 13 secs.

        ets_printf("%d\n", res);
#if 0
	//devyte: this verify step below (cmp:) only works when the end of copy operation above does not overwrite the
	//beginning of the image in the empty area, see #7458. Disabling for now.
        //TODO: replace the below verify with hash type, crc, or similar.
        // Verify the copy
        ets_printf("cmp:");
        if (res == 0) {
            ets_wdt_disable();
            res = copy_raw(cmd.args[0], cmd.args[1], cmd.args[2], true);
            ets_wdt_enable();
            }

        ets_printf("%d\n", res);
#endif
        if (res == 0) {
            cmd.action = ACTION_LOAD_APP;
            cmd.args[0] = cmd.args[1];
        }
    }

    if (clear_cmd) {
        eboot_command_clear();
    }

    if (cmd.action == ACTION_LOAD_APP) {
        ets_printf("ld\n");
        res = load_app_from_flash_raw(cmd.args[0]);
        // We will get to this only on load fail
        ets_printf("e:%d\n", res);
    }

    if (res) {
        SWRST;
    }

    while(true){}

    __builtin_unreachable();
    return 0;
}