G1066R 24" 5 HP Drum Sander
Dual drum sanding to cut the work in half.
You can't beat the G1066R 24" 5 HP Drum Sander for removing planer knife marks and glue lines after panel glue ups while maintaining a consistent board thickness.
Minimize sanding time - the 6" dual drums allow coarse and fine sanding in one pass.
Changing the 3" wide by 181-1/2" long sandpaper is easy and straightforward. Simply open the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The 11-feet-per-minute feed rate lets you complete your sanding tasks in no time.
The G1066R manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 factory
SPECIFICATIONS
- Sanding motor: 5 HP, 220V, single-phase drum, 25A
- Feed motor: 1/4 HP, 1A
- Maximum sanding width: 23-1/2"
- Maximum workpiece thickness: 4"
- Minimum workpiece thickness: 1/8"
- Minimum workpiece length: 9"
- Feed speed: 11 FPM
- Drum speed: 2300 FPM
- Sanding drum size: 6"
- Sandpaper type: 3" x 181-1/2" Hook-and-loop roll
- Footprint: 34-1/2" W x 24"
- Overall dimensions: 37" W x 34-1/2" D x 43" H
- Approximate shipping weight: 442 lbs.
FEATURES:
- Hook-and-loop sanding belt tension/sandpaper
- Industrial-duty rubber conveyor belt
- Two 4" dust ports
- 11 FPM conveyor speed
- V-belt main motor; chain drive feed motor
- Dual 6" aluminum sanding drums
- Computer-balanced drums
- Four leadscrew table lifting and lowering system
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G1066R comes with a 1-year warranty.
Please note: To accommodate the machine's footprint, extension bars may be necessary when using a mobile base.
Hover to View 22" - 26" Models
Accessories
G1066R 24" 5 HP Drum Sander
Dual drum sanding to cut the work in half.
You can't beat the G1066R 24" 5 HP Drum Sander for removing planer knife marks and glue lines after panel glue ups while maintaining a consistent board thickness.
Minimize sanding time - the 6" dual drums allow coarse and fine sanding in one pass.
Changing the 3" wide by 181-1/2" long sandpaper is easy and straightforward. Simply open the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The 11-feet-per-minute feed rate lets you complete your sanding tasks in no time.
The G1066R manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 factory
SPECIFICATIONS
- Sanding motor: 5 HP, 220V, single-phase drum, 25A
- Feed motor: 1/4 HP, 1A
- Maximum sanding width: 23-1/2"
- Maximum workpiece thickness: 4"
- Minimum workpiece thickness: 1/8"
- Minimum workpiece length: 9"
- Feed speed: 11 FPM
- Drum speed: 2300 FPM
- Sanding drum size: 6"
- Sandpaper type: 3" x 181-1/2" Hook-and-loop roll
- Footprint: 34-1/2" W x 24"
- Overall dimensions: 37" W x 34-1/2" D x 43" H
- Approximate shipping weight: 442 lbs.
FEATURES:
- Hook-and-loop sanding belt tension/sandpaper
- Industrial-duty rubber conveyor belt
- Two 4" dust ports
- 11 FPM conveyor speed
- V-belt main motor; chain drive feed motor
- Dual 6" aluminum sanding drums
- Computer-balanced drums
- Four leadscrew table lifting and lowering system
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G1066R comes with a 1-year warranty.
