Our Blog

Here’s how you can wear your full body harness with a lanyard!!

Step 1– Remember to lift your full body fall arrest harness from the back-end and hold the Dorsal D-ring.

Step 2– Slide the straps onto your shoulders and ensure that the D ring is between the shoulders at the back

Step 3– Now connect the chest strap at the front. Don’t forget to adjust the strap according to your fit.

Step 4– Pull the leg straps between the legs and fasten them on opposite ends with the buckles. Also, clamp all the straps similarly.

Step 5– Tuck the extra straps in the loops. Loose or open straps will increase risks to the wearer.

Step 6– Check if you can access the dorsal D-ring with your hand. It should be accessible at all times. Adjust if necessary.

Step 7– Now check the fit by gliding your fingers under the thigh straps. Make changes if too loose or too tight. It should be comfortable.

Step 8– All of this will make sure that the fitting of your harness is right and that you are comfortably mobile.

A tip from the expert

Remember that mobility should be comfortable, all the belts are snug, and lastly, eliminate all slacks for a great fit. Stay safe! Stay aware!!

Looking for the best full body harness suited perfectly for your workforce?

We at Indian Inovatix get you top-notch full body harnesses as per your requirement. You can take your pick from our three exquisite protection series such as the Zeus series, Artemis series, and the Apollo series. Not just body harnesses but our professionals are also proficient in coming up with different kinds of safety equipment such as fall protection systems, confined space entries, emergency evacuation devices, amusement rides, connectors, and more. Work with us, now!!