Door Readers | Access Control Management Software | Access Control Comparison | Purchase Your System
Long-Range Readers
The long-range reader can be used to open a gate from a vehicle. It can also be used for other long-range applications. It has a range of up to 39 ft.
Gate Access Control System Diagram
The long-range system consists of the TVIPUHF-LR long-range reader, TVIP-Procontrol160-Kit access control box, and access control software that runs on your Windows computer.
The long-range reader connects to the access control box through a serial Wiegand type connection. The control box and the computer are both connected to the local area network. The software controls all the credentials. If the credential is accepted, the control box sends a signal (relay connection) to open the gate.
The long-range access control reader uses higher frequencies, such as 865MHz, or 902MHz. Since this is a different frequency than the standard door readers, the credentials are different. These special credentials are available as a card or as a stick-on tag for the vehicle.
The same access control software (TVIPTirSoft) controls standard readers. This means that all the readers can be integrated into the organization’s system (except using different credentials). You can select IP door access readers that use proximity credentials, or even biometric readers.
Long-Range Access Control Reader Specifications
TVIPUHF-LR
The long-range access reader is IP66 rated for outdoor applications. It has a range of up to 40 feet.
This reader has a Wiegand output port. It connects to the TVIP-Procontrol100Kit access control box. A mounting kit is included with the reader.
Specifications
| Frequency: | 902Mhz – 928Mhz (for USA), or 865MHz – 868MHz (for Europe) |
| Read Range: | Up to 39 feet (12m) |
| Material: | Die-casting aluminum shell, Antenna panel with engineering plastic |
| Color: | White |
| Interface: | Wiegand connection |
| Power Supply: | 9 to 12V DC Current: <3W (RF output 26dBm, multiple tags) |
| Outdoor weather protection: | IP-66 |
| Operating Temperature: | -4° F to 140° F ( -20° C to + 60° C) |
| Operating Humidity: | 15% to 90% relative humidity non-condensing |
| Dimensions (H×W×D): | 17.5 x 17.5 x 2.8 inches (445 x 445 x 70 mm) |
| Certifications: | FCC, CE |
TVIP-Procontrol100-Kit Specifications
The access controller is available by itself or inside a metal box. The kit includes the power supply.
This access control can be used with any Wiegand type slave door access reader. The long-range reader connects to this controller and provides the output required to control the electric gate.
Management software allows indication of real-time gate status and remote commanding of the gate to open or close. The controller can be administered using a web browser.
| Specifications | |
|---|---|
| Number of readers supported: | 1 |
| Outputs: | 2 (1 Form-C Relay for Lock and 1 Form-C Relay for Aux Output) |
| Credential capacity: | 30,000 |
| Communication: | Network, TCP/IP RJ45 connection |
| Interface: | Wiegand connection |
| Power Supply: | 9.6V-14.4V DC |
| Dimensions (H×W×D): | 350(L) × 90(H) × 300(W)mm |
Resources
For more about door access control, please see our technical articles:
Product sheet for TVIPUHF-LR Long range reader
Comparison of Long-Range Door Access Control, Compares card credentials and Mobile smartphone credentials.
How Long-Range Access Control Works: Describes how the long-range access readers and credentials work.
How Does Facial Recognition Work: Describes the technology used in facial recognition
How Fingerprint Readers Work: Describes the technology behind fingerprint recognition.
For help selecting all the components of your access control system, please contact us at 800-431-1658 in the USA, or at 914-944-3425 everywhere else, or use our contact form.