MFI Special Scope Mount for HK MP5K to have greater space between the Over-Mold Cocking handle & the end of the rail. Also fits all HK MP5 Variants including HK SP5 & All Clones. / NOT for .22 LR / Price Includes USPS Priority Shipping & Insurance
HK-LOW-MP5K-SLOTS
Designed specifically to fit the HK MP5, HK94, Bobcat, SW5 (9mm) weapons. These have windows cut to see serial numbers on HK MP5s.
THIS PRODUCT IS MADE IN THE USA.
Limited Supply: only 3 remaining
Was:
$198.00
Sale:
$125.00
Save:
37%
Save:
$73.00
- Description
- Specifications
- Weapons
- Restrictions
- IPR / Copyright
- Instructions
- Details
- Shipping
- Reviews
Description
NOTE: NOT for any of the .22 LR guns. Those are not real MP5s regardless of how they are marked. The Umarex / Walther / ATI / HK MP5 .22 all require our specific mount that is only for the .22 caliber guns.
This mount is for a real 9mm MP5.
Our Latest Version & Specifically designed for the HK MP5K series weapons.
This mount differs from our Regular 5.5" Long HK Low Scope Mounts in that it is slightly shorter in length and is contoured at the front to allow more area between the cocking handle and the rail. This added space keeps the operator's hand from hitting the mount when cocking or placing the weapon in the "Safe" position.
This product is a direct response from several Customs and Border Patrol Agents who recently received new HK MP5Ks. All Heckler & Koch MP5s made after 2004 have much larger cocking handles than previous models as they went from a solid steel knob to an Over Molded Rubber on that same knob. This made an already tight tolerance even tighter and in the case of many of our competitor’s mounts, making them un-useable.
This new mount gives the operator a minimum of 0.190" of clearance (in the shortest area) and an added nearly 1/2 an inch over our competitors in front of the rail.
We have left in the 2 WINDOWS / SLOTS cut in the top of the rail in order to see the Serial Numbers on HK MP5s, SW5s and other MP5 variants. All of the aforementioned have serial numbers stamped on the top of the receivers.
The above photos are of a customer's registered NFA / SBR.
Cutting these slots was a direct request from our Law Enforcement Clients who have to see the serial numbers in order to check them in and out or the weapons lock up area. In most cases the entire serial number is 100% visible.
The MFI Series of Low Profile Slotted Scope Mounts are the ONLY low profile mount on the market that does not require the mount to be removed in order to see the serial number.
Co-Witness Note: There is no way to get a true co-witness as all sights are too tall. If you just place your optic on the top of the receiver you will see what I mean.
The lowest mount on the market is our MFI Ultra Low which is only available Exclusively from HKPARTS:
This allows you to co-witness in the low ¼ or ½ of the viewing area… not dead center of the optic as nothing can do that.
https://hkparts.net/all-parts/mfi-ultra-low-profile-red-dot-mount-aimpoint-primary-arms-vortex-burris/
It was designed specifically for the Aimpoint H-1 or H2 / T1 / T2 Micros. The limiting factor is the length of the bottom of your mount that attaches to the rail. If it is over 1.58” long it will not fit on the Ultra-Low.
This is the ONLY mount that works:
https://us.aimpoint.com/product/micro-h-1-mount-weaverpicatinny/
Product # 12738
It is the “STANDARD” that comes on the H1 and H2, but also fits the T1 & T2 but does not come with the T1 or T2. Customers who get H1&H2 will have the correct mount, those who get T1 or T2 need to buy this mount.
Specifications
- 100% Made In the USA.
- 6061 T-6 Aircraft Grade Aluminum (Main Body / Picatinny Rail)
- Weapons Grade Hardened Steel Legs / Hooks. Mil. Spec. Black Oxide Coating.
- Patented Design (Utility): US 7,305,789
- CNC Machined Slots to view Serial Numbers.
- Hard Anodized Flat Black
- Light Weight @ 73.70 gr. ( 2.6 oz. )
- 5.20 Inches ( 132mm ) Long.
- Low Profile Rail Height @ 0.420" ( 10.70mm ).
- 100% Picatinny / Mil. Spec. 1913 Correct.
- Tolerance held is + / - 0.001 (less than the thickness of a piece of paper).
- 4 - Independent Draw Style Hooks for 100% Secure Attachment.
- Chamfered Edges for Fast / Easy On & Off in Adverse Conditions.
- 2 - Counter Recoil Slots to Mate with your Specific Weapon's Scope Mount Anti-Recoil Blocks.
- Does NOT Interfere with the iron sights when a scope is not in place. Clear unobstructed view over the rail.
We try to keep the rail as low a profile as possible in order to meet Military requirements of being able to use the iron sights when the optic is removed. The rail height is as high as it can be WITHOUT completely obstruction the view / use of the iron sights. It is inherent of a design like this that the attachment points i.e. the legs that roll over the side of the receiver may conflict with the specific optics mounting solution. Up until this time (01-2013) we have never had an issue with any mounting solution. The following is a list of mounts to avoid. (currently only one known manufacturer, but I will add to it if others make the same mistake).
Again this is an issue ONLY with this specific mount and it's placement directly over one of the legs. It does fit on the rest of the rail without any problem, so it is a matter of personal eye relief.
- New 2013 EOTech EXPS3 & G33 Magnifier's Throw levers are too wide and hit the top of the MFI leg. This is NOT an issue if using the older models or the SWAN throw lever version.
Weapons
Unlike our competitors (B&T / Brugger + Thomet / EOTech and others) our mount takes less than 3 minutes to mount on the weapon.
Additionally we have ONE MOUNT THAT FITS ALL of the following Real World MP5 Heckler & Koch Weapons Systems.
WEAPONS SYSTEMS:
- HK 94 / HK94
- H&K MP5A2 & MP5 A3
- Heckler and Koch MP5A4 & MP5 A5
- HK MP5K
- HK MP5K PDW
- Vector 94 (All Variants)
- Special Weapons SW5 (All Variants)
- Century Arms AP5 (All Variants including the M and P models)
- Bobcat Weapons BW-5 (All Variants)
- Coharie Arms CA5 / CA-5
- MKE / MKEK (Makina ve Kimya Endüstrisi Kurumu) T-94
- Zenith Arms: Z-5RS, Z-5P, Z-5K and all their variants / models in 9mm.
- As well as all Variants / Clones of MP5 World Wide; Licensed or Unlicensed i.e. Century, CETME, Greek, Iranian, Pakistani, South African etc.
SPECIAL NOTE GSG5 & UMAREX GUNS: This mount does NOT fit the Umarex Correctly and about 50% of the time does not fit the GSG5 either. The issue is that these 2 weapons copied Airsoft product NOT REAL Weapons, so the center section of the mounting bracket is taller by 0.0850" which does not allow the mount to sit flat and level on the top of the receiver. Additionally the receivers are wider than the real guns (again they both copied Airsoft product) and require special legs / hooks. GSG-5 & Umarex Mounts are Available: We have been contracted by HKPARTS.NET to produce a run of the New Version MFI Low Profile 5.5" Long Mount that does have this milled out area & correct size legs / hooks for the GSG5 and Umarex weapons. Contact HKPARTS.NET directly For GSG5 or Umarex weapons systems. Call: 801.440.5060. Here is the DIRECT LINK to the HKPARTS.NET product page. NOTE: This will take you OFF MFI's web site. http://www.hkparts.net/shop/pc/Umarex-HK-MP5-22-Low-Profile-Scope-Mount-130p2389.htm
Restrictions
This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.
This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.
This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.
Please feel free to contact us if you have any questions on this issue.
IPR / Copyright
All images are the sole property of MFI LLC and are protected by copyright laws.
Most of our products are protected by Utility and or Design Patents.
MFI is a Registered Trademark.
We do NOT tolerate any violations of our Intellectual Property Rights.
SPECIAL NOTE ON STYLE & TRADE NAMES: "HK", "MP5", "G3", HK94, as well as other marks, are Registered Trademarks of Heckler & Koch and are used on this web site for reference only. This item is NOT manufactured by HK (Heckler & Koch). This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI. FN, FNH, Fabrique Nationale, PS-90, PS90, P90 as well as other marks, are Registered Trademarks of FNH and are used on this web site for reference only. This item is NOT manufactured by FNH. This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI. Knight's Armament has Registered Trademarks & if any are used on this web site they are used for reference only. This item is NOT manufactured by Knight's Armament. This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI. Israeli Military Industries has Registered Trademarks (UZI + others) & if any are used on this web site they are used for reference only. This item is NOT manufactured by IMI. This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI. Thus any mention of or use of trade names is done in reference to the real weapon for which these items are designed to fit on to. No MFI offered product has any Trademarks or other IPR use on it other than our own. We do this to be sure that there is NO CONFUSION IN THE MARKET.
Instructions
- Be sure the weapon is unloaded and the safety is on.
- Remove all 4 of the small bolts from the mount.
- Open / pull outward the bottom of the hook / lock point on all 4 points.
- Place the mount on top of the weapon's scope mounting points and press down. While pressure is applied press the mounting points back inward toward the receiver.
- Place the small bolts back into the 4 holes and down into the mounting points and tighten by hand to avoid cross threading. Alternate from bolt to bolt as you tighten to keep the mount level. Use a 5/64 allen key / hex wrench to finish tightening (do not over tighten). The mount is now installed. To remove simply reverse the aforementioned instructions. Never use Loctite or any other thread locking compound as it will take a torch to get the mount off or you will strip the bolt heads. The set screw is used to apply pressure down on to the top of the receiver to add stability to the extension area. Once attached to the weapon this mount should NOT be removed. It does NOT interfere with the iron sites or any other operation such as cleaning. On and Off removal will result in stripping the threads on the hooks.
HAND FITTING / TROUBLE SHOOTING
Because there are so many G3 / MP5 variants (genuine and clone) out there & in 6 different calibers, that span 30+ years of manufacturing changes, some hand fitting may be required. The issue mainly stems from the fact that in order to get a good solid fit we have to hold very tight tolerances. The tolerances that the manufacturers hold to are far less stringent. This mount unlike other HK style mounts does NOT squeeze the receiver via a cam mechanism or utilize a side to side lock. We are clamping to the small gusseted shelves in an up and down fashion. This "sandwiching" type of mounting system is far more robust and stable than any side to side type of mount. Again we are dealing with a tolerance of +/- thousands of an inch (less than the thickness of a couple playing cards).
Manufactures of these weapons can easily fall out of spec without knowing because:
- Some hold tolerances only to +/- hundredths of an inch as there is no solid Mil. Spec. for this area.
- Using thicker or thinner steel for the stamping.
- The application of too much paint.
- Dripping paint over the ledge of the shelf.
- Use of old or worn tooling.
- Not making the final milling pass to flatten the shelf / ledge.
- PROBLEM: My MFI mount SLIPS OFF when tightened or does NOT grab the shelf or shelves as it appears the legs / hooks are NOT long (width) enough to make solid contact with the receiver ledge. ANSWER: For this there are 2 possible answers:
- There is a glob of paint / paint drip that is covering the sharp right angle of the lower part of the ledge where the hook / leg hits the receiver. Look to see if this might be the issue. If you cannot see a clear delineation in the shelf that makes a sharp right angle for the ledge then take a probe / hand file / sharp pointed object and run it across the ledge to remove the excess paint.
- Your receiver is out of spec and falls in the very narrow spectrum. Contact MFI for a wider / longer reaching hooks / legs. If you are familiar with knocking in and out roll pins we can just send you a set of our special longer legs / hooks. If not you can send us the mount and we can swap out the hooks for you FREE OF CHARGE. You pay only the shipping to us. You will likely still have to hand fit the legs to your receiver as we make these extra long to accommodate the wide variety of out of spec distances. (see below #3) NOTE: Each steel leg / hook costs us $7.00 to make. So we supply these on a per needed basis only. You may be required to send in the old legs for length verification. Otherwise a set of (2) legs / hooks are available to buy for $15.00 (which includes S&H).
- PROBLEM: My MFI mount does NOT sit flat / level on the top of the receiver. NOTE: There should be a uniform gap / space between the bottom of the mount and the top of the receiver. ANSWER: You likely have not fully seated the mount over the anti-recoil stop block (the part sticking up just forward of the rear sight on a G3 (HK 91 / HK 93) or the welded taps in the center of the receiver on a HK MP5). With the mount just sitting on the top of the receiver (no screws or bolts in the hooks / legs) it should sit flat and level. If NOT... Although quite rare... You likely have a CETME, HK Clone or Mid 1980s HK91 build using after market rear sight blocks that have the tower portion (part sticking up) that is too tall. Generally the fastest fix is to file down the tower with a hand file. We are talking about only a few hits with a hand file to knock the high spot down. The other option is to mill out the MFI rail from underneath where we already have the cut out slot.
- PROBLEM: I cannot get all of the bolts / screws in the hooks / legs of my MFI HK Low Profile Mount. Meaning... When I look down from the top of the mount, through the hole where the bolt goes in the main body of the mount, I see that the hook / leg is sitting at a slight angle pointing inward towards the center of the receiver. DO NOT force the bolt in as you may cross thread or strip the threaded holes in the legs.
- First be sure that the mount is centered on the top of the receiver. It is normal to have some side to side play to center the mount. If it is centered then continue to step "b". If NOT then you will need to do step "b" to all legs / hooks in order to have the mount centered on the receiver (this is very rare).
- b. Use a hand file or Dremel fiber cutting wheel (use the side of the wheel) & remove a small amount of the material on the leading edge of the leg / hook where the leg / hook hits the receiver ledge / shelf. You need to remove the same amount from ALL of the legs on the 5.5" and 6.5" long mounts. Mounts that have 6 legs you will remove the Same amount of material on ONLY the 4 REAR legs. So try to remove the same amount of material from each leg.
ANSWER: Your receiver is slightly out of spec and falls in the wide receiver spectrum. Remember that we have to gauge our legs for the MOST COMMON tolerance. In this case you actually have a higher quality weapon in that the steel being used is likely a hair thicker than normal. All you have to do is remove a small amount of material from the part of the leg(s) / hook(s) that are not allowing the bolts to go down into. Follow these steps:
Do NOT remove material from the set of legs forward of the ejection port as this area does not have the shelf / mounting point built into the receiver like the rear does. This will take some time and require you to mount and dis-mount the MFI HK Low Profile Mount from the receiver several times. In doing so you will end up with a Rock Solid mounting platform custom fit to your weapon.
NOTE TO ZEALOUS LEFTIST DEMOCRAT / COMMUNIST ANTI GUN ASSHOLES & THEIR CRONY LAW ENFORCEMENT:
In accordance with the Joe Biden & Beto O’Rourke directive I personally as well my company no longer own(s) or possess any firearms or ammunition. This includes but is not limited to: Handguns, Pistols, Shotguns, Rifles, NFA items, Hog Legs, Fire Sticks, Smoke Poles and or Thunder Clubs.
All firearms that appear on our web site, regardless of what is written about them, are not owned by the company nor possessed by anyone associated with MFI and may even be CGI / PhotoShop. Therefore regardless of any new firearms laws / taxes, no probable cause can EVER be assumed on any property (stationary or mobile) owed by myself or MFI. AGAIN: We are 100% in compliance with any possible new “Biden / O’Rourke Public Safety Act” and therefore NO PROBABLE CAUSE could ever be assumed. Lastly anyone arriving with a warrant of any kind will be assumed to be an IMPOSTER with intent on murdering us and will be treated as such without warning. Those invading our territory may receive serious and even fatal wounds from rusty blades, clubs with bent nails, spear tips, arrows and or crossbow bolts.Details
- HK-LOW-MP5K-SLOTS
- HK-LOW-MP5K-SLOTS
- MFI
- Available
- New
Shipping Information
- Item Requires Shipping
- 0.8 lbs.
-
SHIPPING IS INCLUDED VIA USPS on orders over $82.00 Dollars AND OR If S&H is INCLUDED in the Title / Discription.
Customer Reviews
Total Reviews (1)
You must login to post a review.
Reviewed by: Austin07/03/2020 12:05AM
Product ownership: Less than 1 week
Purchased from: MFIAP.COM
Comments:
Bought it for my SP5 and it’s a great value for the price
Since it was made for the SP5K, the serial number windows don’t show the full size SP5 serial numbers entirely (whoops)
Leaves just enough room on the end to not obstruct your hand when slapping the charging handle though so I’d still prefer this model to other longer ones meant for the sp5.
Came with free priority 2 day shipping and the owner threw in $15 store credit. (Thanks!)