Turret for HMMWV Hummer M1114 standard size turret
MSG offers the most cost-effective high-quality turret solutions in the industry.
Menu of Options:
- Certified bearing rings (with varying load ratings)
- Custom-designed adapter plates or integration
- Traversing mechanism (manual or powered)
- Turret braking system (proprietary system)
- Travel lock (above or below turret)
- A-Frame (rigid, lightweight, and low-profile)
- Hatches (either armored or unarmored)
- Secondary Weapon Stations
- Gunners' Protection Kit or Armor Shields (vehicle specific models)
Turret for HMMWV Hummer M1114
Click Photo to Expand Details
MSG 46-Series Turret System (TUR2000)
A modular system that includes:
- High load capacity 46" turret bearing (2500+ lbs.) with 20% more workspace than the standard
- US Military (42") bearing and standard bolt pattern for additional components
- Folding A-Frame, secondary weapon station, and ammunition stowage quickly fold into the
- vehicle to rapidly load an MH-47 helicopter
- Supports the recoil forces of an M230LF 30mm chain gun
- A clutched, manual traversing mechanism with built-in travel lock assembly
- Ammunition stowage configurations for a mix of .50 Cal, 40mm, and 7.62mm ammunition cans+ Rugged: tested to stringent US Military standards
- Readily accepts a gunner protection kit
- MSG offers other vehicle components depicted; such as the SA12 Swing Arm Systems;
- Ammunition, water, fuel and equipment stowage; running boards; bumpers; jack Mounts; and Pioneer Tool Kit
MSG 46-Series Turret System (TUR2000)
Click Photo to Expand Details
MSG 42 Series Turret Systems (TUR2100)
The Military Systems Group 42 Turret System is the standard turret on the SOCOM GMV 1.1. It features a folding A-Frame and quick release ammunition can holder to facilitate rapid deployment on aircraft. Turret shown with Folding A-Frame, Secondary Weapons Station and 3 Bay Ammo Holder.
MSG 42 Series Turret Systems (TUR2100)
Click Photo to Expand Details
Armored Turret for Hummer M1114 GMV 1.1
MSG offers the most cost-effective high-quality turret solutions in the industry.
Menu of Options:
- Certified bearing rings (with varying load ratings)
- Custom-designed adapter plates or integration
- Traversing mechanism (manual or powered)
- Turret braking system (proprietary system)
- Travel lock (above or below turret)
- A-Frame (rigid, lightweight, and low-profile)
- Hatches (either armored or unarmored)
- Secondary Weapon Stations
- Gunners' Protection Kit or Armor Shields (vehicle specific models)
Armored Turret for Hummer M1114 GMV 1.1
Click Photo to Expand Details
GMV 1.1 Gunner Protection Kit (GPK) (TUR2401)
The Ground Mobility Vehicle 1.1 Gunner Protection Kit was designed and tested in conjunction with US Special Operations Command (USSOCOM). This GPK is half the weight of the OGPK 2.0 while providing the same level of ballistic protection! The side walls are 16 inches high and incorporate a modular track system for stowage, external ammunition can holders and left and right-hand secondary weapon stations. Additionally, an adjustable front armor plate accommodates various heavy Machine Guns and automatic grenade launchers. This GPK represents the cutting edge of turret and GPK design and will be feature on the new GMV 1.1 as the Operator's turret of choice.
GMV 1.1 Gunner Protection Kit (GPK) (TUR2401)
Click Photo to Expand Details
Gunner Protection Kit GPK Armored turret GMV
The Ground Mobility Vehicle 1.1 Gunner Protection Kit was designed and tested in conjunction with USSOCOM. This GPK is half the weight of the OGPK 2.0 while providing the same level of ballistic protection! The side walls are 16 inches high and incorporate a modular track system for stowage, external ammunition can holders and left and right hand secondary weapon stations. Additionally, an adjustable front armor plate accommodates various heavy machine guns and automatic grenade launchers. This GPK represents the cutting edge of turret and GPK design and will be feature on the new GMV 1.1 as the Operator's turret of choice.
Gunner Protection Kit GPK Armored turret GMV
Click Photo to Expand Details
Flyer armored turret for SOCOM GMV 1.1
GMV The U.S. Special Operations Command (USSOCOM) designed and tested a single, modular turret system that can be used across threat levels. The unarmored version (left) quickly collapses to meet CH-47 height requirements. The armored system (right) uses the same base turret system for the Gunner Protection Kit.
Flyer armored turret for SOCOM GMV 1.1
Click Photo to Expand Details
MK93 Armor Shield Assembly
The Armor Shield Assembly comprises a one-piece armor bracket with built-in depression stop assembly and an armor shield in one assembly. MSG can provide a wide variety of armor shields in both steel and composites, depending on customer requirements. The standard shield is a hard steel shield with a defeat level of .50 Cal (12.7x99mm). The bracket assembly is made from non-corrosive steel.
MK93 Armor Shield Assembly
Click Photo to Expand Details
3-Bay Low-Profile Ammo Can Assembly
- Part No. M70-244
- The mounting bracket (M70-337) mounts to the rear of the turret using existing turret bearing mounting holes. The mounting bracket is designed for use with the 3-bay ammo can holder (M70-244), which can be rapidly removed and installed using captive ball lock pins. The 3-bay ammo can bin will hold six 12.7mm/.50 Cal 100 round ammunition cans, three 12.7mm/.50 Cal (PA70) 225 round ammunition cans, or three 40mm 32 round ammunition cans.
- The lightweight bracket and bins balance the turret, making the turret easier to control and traverse, critical with a manual turret not on level ground.
3-Bay Low-Profile Ammo Can Assembly
Click Photo to Expand Details
3 Bay Mounting Bracket
- Part No. M70-244
- The mounting bracket (M70-337) mounts to the rear of the turret using existing turret bearing mounting holes. The mounting bracket is designed for use with the 3-bay ammo can holder (M70-244), which can be rapidly removed and installed using captive ball lock pins. The 3-bay ammo can bin will hold six 12.7mm/.50 Cal 100 round ammunition cans, three 12.7mm/.50 Cal (PA70) 225 round ammunition cans, or three 40mm 32 round ammunition cans.
- The lightweight bracket and bins balance the turret, making the turret easier to control and traverse, critical with a manual turret not on level ground.
3 Bay Mounting Bracket
Click Photo to Expand Details
Bearing Sleeve Extension and Brass Brushes
Part No. M70-335 M1113 HMMWV
Part No. M70-540 M1025 HMMWV
Bearing Sleeve Extension and Brass Brushes
Click Photo to Expand Details
MK93 Armor Shield Assembly
Part No. M35-021
The MK93 Armor Shield Assembly comprises a One-Piece Armor Bracket with built-in Depression Stop Assembly and an Armor Shield in one assembly. MSG can provide a wide variety of armor shields in both steel and composites, depending on customer requirements. The "standard" shield is a Hi- Hard Steel shield with a defeat level of .50 Cal (12.7x99mm) Ball. The bracket assembly is made from non-corrosive steel.
MK93 Armor Shield Assembly
Click Photo to Expand Details
Secondary Weapons Station Type 1 Pintle Assembly
- Part No. M09-184
- Attaches to the turret by utilizing the TOW bracket/dog collar.
Secondary Weapons Station Type 1 Pintle Assembly
Click Photo to Expand Details
Lightweight Low-Profile A-Frame
The Low-Profile A-Frame is a weight and space saving design that works in conjunction with MSG turrets, OGPK, or any standard size (42" outside diameter) turret. Available in lightweight aluminum or steel.
Lightweight Low-Profile A-Frame
Click Photo to Expand Details
Part No. M09-185
Attaches to the outside of the turret ring by utilizing the existing hole pattern on the ring.
Secondary Weapons Station Type 3 Pintle Assembly
Click Photo to Expand Details
