Per- and Polyfluoroalkyl Substances (PFAS)

The best way to keep drinking water safe is to protect the source. Pinellas County Utilities (PCU) is committed to continuously protect drinking water for everyone who lives in and visits our county.

What are PFAS?

Per- and Polyfluoroalkyl Substances (PFAS) are a family of chemicals used since the 1940s to manufacture stain-resistant, water-resistant and non-stick products. PFAS are widely used in common consumer products as coatings, like food packaging, outdoor clothing, carpets, leather goods, personal care products, cosmetics and more. Certain types of firefighting foams—historically used by the U.S. military, local fire departments, and airports to fight oil and gasoline fires—may also contain PFAS.

A wheel chart of products that contain PFAS.

These substances stay in the environment for a long time because they do not break down easily. As a result, PFAS are widely detected in soil, water, air and food. People can be exposed to PFAS when they use products that contain the compounds, eat PFAS-contaminated food or drink PFAS-contaminated water. When ingested, some PFAS can build up in the body. Over time, they may accumulate to levels associated with negative health outcomes.

The U.S. Environmental Protection Agency (EPA) is focused on a small number of these compounds that may have health effects at very low concentrations, two of which are perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS).

Chart depicting the cycles of PFAS.

PFAS and Public Health

Chemicals like PFAS do not originate in the Tampa Bay Water treated drinking water supply provided to PCU customers. The manufacturing and use of products with PFAS puts PFAS chemicals into the environment, where, over time, they may end up in drinking water supplies. 

PCU delivers clean, quality tap water that meets or exceeds all federal and state standards for safe drinking water. Tampa Bay Water treatment plants are not located near industrial or manufacturing facilities known to produce PFAS materials.

What is the EPA doing?

The EPA issued interim drinking water lifetime Health Advisory levels for select PFAS in June 2022 at lower levels than previously issued in 2016. PFOA and PFOS cannot yet be reliably measured at those levels using current scientific instrumentation. The interim Health Advisories will remain in place until the EPA develops formal regulation.

In March 2023, the EPA issued proposed regulatory limits for six PFAS compounds in drinking water. The proposed limits address levels of PFOA and PFOS as individual contaminants, while the other four compounds (PFNA, PFHxS, PFBS, and Gen X) are included as a PFAS mixture.

Timeline of EPA drinking water regulations for PFAS.

What is Pinellas County doing?

We are participating in the EPA’s Unregulated Contaminant Monitoring Rule 5 (UCMR5) study to evaluate concentrations of 29 unregulated PFAS compounds in drinking water supplied to our customers. This effort included quarterly sampling and analysis of these chemicals with a total of four sampling events during a 12-month monitoring period. We did not detect PFAS compounds in any of the drinking water samples collected at the entry point into our distribution system during this study (results below).

UCMR5 Results

Quarters 1, 2, 3 and 4 results as reported in September 2023, January 2024, May 2024 and July 2024, respectively.

Contaminant Minimum Reporting Level (ug/L) Results Q1  Results Q2 Results Q3 Results Q4
11-chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS) 0.005 ND ND ND ND
1H,1H, 2H, 2H-perfluorohexane sulfonic acid (4:2FTS)  0.003 ND ND ND ND
1H,1H, 2H, 2H-perfluorooctane sulfonic acid (6:2FTS)  0.005 ND ND ND ND
1H,1H, 2H, 2H-perfluorodecane sulfonic acid (8:2FTS)  0.005 ND ND ND ND
9-chlorohexadecafluoro-3-oxanonane-1-sulfonic acid (9Cl-PF3ONS)  0.002 ND ND ND ND
4,8-dioxa-3H-perfluorononanoic acid (ADONA) 0.003 ND ND ND ND
*hexafluoropropylene oxide dimer acid (HFPO-DA)(GenX)  0.005 ND ND ND ND
nonafluoro-3,6-dioxaheptanoic acid (NFDHA) 0.02 ND ND ND ND
perfluorobutanoic acid (PFBA)  0.005 ND ND ND ND
*perfluorobutanesulfonic acid (PFBS)  0.003 ND ND ND ND
perfluorodecanoic acid (PFDA) 0.003 ND ND ND ND
perfluorododecanoic acid (PFDoA) 0.003 ND ND ND ND
perfluoro (2-ethoxyethane) sulfonic acid (PFEESA)  0.003 ND ND ND ND
perfluoroheptanoic acid (PFHpA)  0.003 ND ND ND ND
perfluoroheptanesulfonic acid (PFHpS) 0.003 ND ND ND ND
perfluorohexanoic acid (PFHxA)  0.003 ND ND ND ND
*perfluorohexanesulfonic acid (PFHxS) 0.003 ND ND ND ND
perfluoro-4-methoxybutanoic acid (PFMBA)  0.003 ND ND ND ND
perfluoro-3-methoxypropanoic acid (PFMPA) 0.004 ND ND ND ND
*perfluorononanoic acid (PFNA)  0.004 ND ND ND ND
*perfluorooctanoic acid (PFOA)  0.004 ND ND ND ND
*perfluorooctanesulfonic acid (PFOS)  0.004 ND ND ND ND
perfluoropentanoic acid (PFPeA)  0.003 ND ND ND ND
perfluoropentanesulfonic acid (PFPeS)  0.004 ND ND ND ND
perfluoroundecanoic acid (PFUnA)  0.002 ND ND ND ND
N-ethyl perfluorooctanesulfonamidoacetic acid (NEtFOSAA) 0.005 ND ND ND ND
N-methyl perfluorooctanesulfonamidoacetic acid (NMeFOSAA) 0.006 ND ND ND ND
perfluorotetradecanoic acid (PFTA) 0.008 ND ND ND ND
perfluorotridecanoic acid (PFTrDA) 0.007 ND ND ND ND
*Contaminants with proposed regulatory limits
ND Non-Detect: contaminant was analyzed but not detected

Our wholesale water provider, Tampa Bay Water, conducted its own sampling at upstream points of connection into the Pinellas County Utilities system. The results are posted here. Three of the six PFAS compounds with proposed regulatory limits were detected at these locations at concentrations well below the proposed limits.   

PCU strongly supports holding polluters accountable for cleaning up PFAS contamination. Working with Tampa Bay Water and the Florida Department of Environmental Protection, we will stay current with scientific and technological updates to continue to meet all regulatory requirements.

What can you do?

  1. Learn more about the issue.
  2. Be aware of the many sources of PFAS exposure.
  3. If you’re concerned about exposure, you can check household product ingredient labels for compounds with “perfluoro” or “polyfluoro” in the name.
  4. Reach out to manufacturers of non-stick, water-resistant, and stain-resistant products for information about their contents.
Original text
Rate this translation
Your feedback will be used to help improve Google Translate