Jump to content

ᱢᱳᱰᱩᱞ:Location map/data/Peru

ᱣᱤᱠᱤᱯᱤᱰᱤᱭᱟ, ᱨᱟᱲᱟ ᱜᱮᱭᱟᱱ ᱯᱩᱛᱷᱤ ᱠᱷᱚᱱ
ᱥᱟᱹᱜᱩᱱ ᱗ (ᱨᱚᱲ | ᱮᱱᱮᱢ) ("return { name = 'ᱯᱮᱨᱩ', top = 0.73, bottom = -19.36, left = -83.25, right = -66.75, image = 'Peru location map.svg', image1= 'Peru physical map.svg' }" ᱥᱟᱶᱛᱮ ᱥᱟᱦᱴᱟ ᱵᱮᱱᱟᱣᱟᱠᱟᱱᱟ) ᱫᱟᱨᱟᱭᱛᱮ ᱑᱒:᱓᱓, ᱓᱐ ᱚᱜᱚᱥᱴ ᱒᱐᱒᱑ ᱨᱮᱱᱟᱜ ᱧᱮᱞᱟᱹᱨᱩ
(ᱡᱩᱫᱟᱹ) ← ᱯᱟᱹᱦᱤᱞ ᱯᱟᱲᱦᱟᱣ ᱨᱩᱣᱟᱹᱲ | ᱱᱮᱛᱟᱨ ᱧᱮᱞ (ᱡᱩᱫᱟᱹ) | ᱱᱟᱣᱟᱛᱮ ᱧᱮᱞ ᱨᱩᱣᱟᱹᱲ → (ᱡᱩᱫᱟᱹ)


Location map of ᱯᱮᱨᱩ
name ᱯᱮᱨᱩ
border
coordinates
0.73
-83.25 ←↕→ -66.75
-19.36
map center 9°18′54″S 75°00′00″W / 9.315°S 75°W / -9.315; -75
image Peru location map.svg
image1 Peru physical map.svg


ᱢᱳᱰᱩᱞ:Location map/data/Peru is a location map definition used to overlay markers and labels on an equirectangular projection map of ᱯᱮᱨᱩ. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Peru":

Map definition

  • name = ᱯᱮᱨᱩ
    Name used in the default map caption
  • bottom = -19.36
    Latitude at bottom edge of map, in decimal degrees
  • left = -83.25
    Longitude at left edge of map, in decimal degrees
  • right = -66.75
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 16.5 degrees.

  • At an image width of 200 pixels, that is 0.0825 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.0165 degrees per pixel.

Latitude: from North to South this map definition covers 20.09 degrees.

  • At an image height of 200 pixels, that is 0.1005 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.0201 degrees per pixel.


See also

Location map templates

Creating new map definitions

Infobox templates incorporating (passing values to) the Location map template


return {
	name = 'ᱯᱮᱨᱩ',
	top    = 0.73,
	bottom = -19.36,
	left   = -83.25,
	right  = -66.75,
	image = 'Peru location map.svg',
	image1= 'Peru physical map.svg'
}