… In order to obtain a test metric for globally characterizing TRAM, we adopt the one suggested
… the performance of TRAM for detecting the targeted faults, we select two filters as cases of …

… The described type of analysis can be compared to filtering with constant relative bandwidth
Δf/fs. The position of the filter on the time-scale representation is determined by the scale …

… An unscented Kalman filter is finally designed to show the effect and importance of the … of
a high speed train, and Ribeiro [Citation26] identified the numerical parameters that are most …

… Abstract- In this paper, we present a technique for the design of narrowband multiplierless
IIR filter based on sensitivity analysis. All the multiplication constants in proposed filter …

… In this work, we analyze the ability of TRAM for detecting … proposal of taking into account
an additional test parameter … a second order filter [13] and are referred in this work as test …

… the need of a separate study for sensitivity analysis of the digital filters. In general, there
are two major problems of concern in the sensitivity analysis of a digital filter: 1) truncation or …

… the full performance measure 8 was used whenever sensitivity analyses were performed. …
statistical multiparameter sensitivity measure for notch filters,” IEEE Tram. Circuits Syst. vol. …

… life year (QALY) gained with TRAM+DAB compared with vemurafenib in … sensitivity analyses
were performed to test the robustness of the results. Sensitivity analyses for the given TRAM…

… We tested the tram-line filter against the STARE algorithm [1]. STARE is a particularly
sophisticated variant of the linear filtering approach, which includes contrast equalization, a flood-…

… a train using linear time-frequency analysis. The Wigner–Vile transform of the vibration signal
during the movement of a train over the track is the basis for analysis … , S is filtered using h l …