Hikvision Camera Configuration
Hikvision Camera Configuration
2024-11-12
Version 2.3
To integrate a Hikvision camera there are a few settings that need adjustment. Please follow the steps below to configure the device so that it integrates properly with the Eagle Eye Networks system.
Log in to the Hikvision Camera.
Select System>Security.
Select Security Service.
Deselect Enable Login Lock.
Click Save.
Log in to the Hikvision Camera.
Select System>Security.
Select Security Service.
Deselect Enable Login Lock.
Click Save.
Log in to the Hikvision Camera.
Select System>Security.
Select Authentication.
From the RTSP Authentication dropdown select digest/basic.
From the RTSP Digest Algorithm dropdown select MD5.
Log in to the Hikvision Camera.
Select Network>Advanced Settings.
Select Integration Protocol.
Select Enable Hikvision-CGI.
From the Hikvision-CGI Authentication drop-down select Digest.
If Digest&WS-UsernameToken is available, use this instead.
Select Enable ONVIF.
Add a User, with the same login information as the camera, at Administrator level.
Click Save.
Log in to the Hikvision Camera.
Select Image>OSD Settings.
Deselect Display Date.
Click Save.
The OSD can cause motion events in the Eagle Eye system triggering recording.
Main Stream
Select Video/Audio>Video.
From the Stream Type drop-down select Main Steam(Normal).
Select the preferred Resolution.
Select 12fps for the Frame Rate.
Select H.264 for Video Encoding.
Eagle Eye Networks only supports native H.264.
Click Save.
Sub-Stream
Select Video/Audio>Video.
From the Stream Type drop-down select Sub-stream.
Select the preferred Resolution.
Select 8fps for the Frame Rate.
Select MJPEG for Video Encoding.
Select Save.
Select System>System Settings.
Select Time Settings.
Ensure the Time is correct.
Some cameras will have the wrong date and that prevents the Eagle Eye system from connecting to it properly.
4. Click Save.
If there are any issues selecting the Time Zone attempt to Sync with computer time.
Log in to the Hikvision Camera.
Select System>Security.
Select Authentication.
From the RTSP Authentication dropdown select digest/basic.
From the RTSP Digest Algorithm dropdown select MD5.
Log in to the Hikvision Camera.
Select Network>Advanced Settings.
Select Integration Protocol.
Select Enable Hikvision-CGI.
From the Hikvision-CGI Authentication drop-down select Digest.
If Digest&WS-UsernameToken is available, use this instead.
Select Enable ONVIF.
Add a User, with the same login information as the camera, at Administrator level.
Click Save.
Log in to the Hikvision Camera.
Select Image>OSD Settings.
Deselect Display Date.
Click Save.
Select Video/Audio>Video.
From the Stream Type drop-down select Main Steam(Normal).
Select the preferred Resolution.
Select 12fps for the Frame Rate.
Select H.264 for Video Encoding.
Eagle Eye Networks only supports native H.264.
Click Save.
Select Video/Audio>Video.
From the Stream Type drop-down select Sub-stream.
Select the preferred Resolution.
Select 8fps for the Frame Rate.
Select MJPEG for Video Encoding.
Select Save.
Select System>System Settings.
Select Time Settings.
Ensure the Time is correct.
Some cameras will have the wrong date and that prevents the Eagle Eye system from connecting to it properly.
For support please email: [email protected]
or give us a call at: 512-473-0501
US: +1-512-473-0501
EU: 31 (0) 20 26 10 461
ASIA PACIFIC: +81-(3)-6869-5477
#1 In Cloud Media Video Surveillance Worldwide
Copyright Eagle Eye Networks. All rights reserved.
For support please email: [email protected]
or give us a call at: 512-473-0501
US: +1-512-473-0501
EU: 31 (0) 20 26 10 461
ASIA PACIFIC: +81-(3)-6869-5477
#1 In Cloud Media Video Surveillance Worldwide
Copyright Eagle Eye Networks. All rights reserved.
Related Articles
Amcrest Camera Configuration
Amcrest Camera Configuration 2024-05-23 Version 2.0 Description The guide provides detailed steps on the configuration of Amcrest cameras for use with an Eagle Eye bridge/CMVR. 1. Click the Satellite icon next to the camera or log in locally. You ...Mobotix/ MOVE Camera Configuration Guide
Mobotix/ Move Camera Configuration 2024-05-14 Version 2.0 Description To ensure your Mobotix camera integrates with the Eagle Eye System properly, the following configuration specifications need to be met. Configuration Click Admin Menu. Navigate to ...Bosch Camera Configuration
Bosch Camera Configuration 2024-12-17 Version 1.0 Description This guide will provide the necessary configuration needed for Bosch cameras to integrate with an Eagle Eye Networks system. Ensure to follow each configuration step for proper ...Hanwha/ Wisenet Camera Configuration
Hanwha/ Wisenet Camera Configuration 2024-09-23 Version 1.0 Description This camera brand does not require many settings changes to work with the Eagle Eye Networks bridge. There are a few caveats in regards to how the cameras can be connected ...Axis Camera Configuration Guide
Axis Camera Configuration 2024-05-13 Version 2.0 Description Most Axis camera’s default settings are compatible with our system. To set up the camera to stream to the Eagle Eye cloud you must set up ONVIF. ONVIF Setup 1. Log in to the camera. 2. ...