Double Bolt Hose Clamp SL115:

1 Material:Malleable iron,Zinc plated,galvanized steel,Plated Malleable Iron/Carbon Steel

2 Structure:machine bolts, hex nuts, and saddles.
3 Double bolt hose clamp Size:SL115MM (94-115mm)

4 Norm:DIN20039

5 Double bolt hose clamp SL40mm weight:695g

Double Bolt Hose Clamp SL115

Tianjin techi industrial co.,ltd produce Double Bolt Clamps with Saddles – Plated Iron On hose assemblies,same clamp with dixon double bolt clamp,material is Plated Malleable Iron/Carbon Steel,GI double bolt clamps with saddle.

Techi produce cast iron double bolt hose clamp sl115mm in silver colour and golden yellow colour

Double bolt hose clamp size:

SL22,SL29,SL34,SL40,SL49,SL60,SL76,SL94,SL115,SL400,SL463,SL525,SL550,SL600,SL675,SL769,SL818,SL875,SL998,SL1125,SL1275,SL1450

Double bolt hose clamps provide an efficient means of securing couplings for low pressure discharge or suction service. Double bolt hose clamps are sized for hose OD’s from 1-5/8″ through 17-1/2″. As the bolts are tightened, the double-tongue saddles fill the gap between the bolt lugs preventing pinching of the hose OD. Fully tightened, the double bolt clamps secure the full circumference of the hose.

Note: 

Please measure hose outer diameter (OD) accurately before ordering clamps.

• Inner surface has dual gripping ridges
• Bolt lugs are reinforced to prevent bending out of alignment
• Torque values for clamps are based on dry bolts
• Use of lubricant on bolts will adversely effect clamp performance
• Contact us when using Double Bolt Clamps on helical wire hose

Double bolt hose clamp size chart and specification:

Double bolts hose clamp package in ready stock