|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Sedalia, United States ATLAS CRAFTSMAN 648-70-001 Change Output Gear Qty.18 Metal New. Brand new. Quantity of 18. See pictures for details.
Buy It Now
Free Shipping Condition: New Location: Sedalia, United States ATLAS CRAFTSMAN 648-70-001 Change Output Gear Qty.1 Metal New. Brand new. Qty of 1. See pictures for details.
Buy It Now
$6.40 Shipping Condition: New Location: Merrimack, United States Shaft is made of precision drill rod and has a large front stickout for centering in 4 jaw chucks.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Condition is "Used".
Buy It Now
Free Shipping Condition: New Location: Fountaintown, United States Regular lubrication and maintenance will keep your Lathe in use for years. Here is list of Craftsman 12" lathes models known to fit and built by Atlas ... morepress Co. Highest Quality available so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Made by Dave from YouTube's Crafted Channel. I own many Atlas lathes on which to test my parts. I have run plastic parts including my ABS gears and change ... moregear bushings for over 4 years making big cuts.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Photo 2: Demonstrate s part installed on Atlas / Craftsman apron fitting with factory parts perfectly. See pointer. Shown with parts NOT INCLUDED to illustrate ... morefit and function. No apron, no bevel gear bracket, no internally toothed cross-feed bevel gear, no apron, no fasteners.
Buy It Now
$5.65 Shipping Condition: New Location: Fountaintown, United States Can be used in Timken bearing or Babbet bearing lathes. Here is list of Craftsman 12" lathes models built by Atlas press Co. Typical uses include: lubrication ... morewicks, grease seals and wipers. Felt is highly.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Photo 2: Demonstrate s part installed on Atlas / Craftsman apron fitting with factory parts perfectly. You are getting ONLY the Gray miter gear the lead ... morescrew passes through (and the retaining collar).
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Engages 13 teeth of the bull gear all at once. Developed to remove a chuck that got stuck for no apparent reason on my regularly used lathe. I had my ... more18" Adjustable wrench on the jaw as well as 36" long pipe.
Buy It Now
$10.50 Shipping Condition: New Location: Fountaintown, United States Atlas 10" and Craftsman 12" Listed. Atlas Lathe 6 mounting instructions PDF. Atlas Lathe 6 threading chart JPEG. MADE IN USA 100% Wool F-5 Felt and Q ... moreuality Wipers with excellent resistance to petroleum-based oils and long wearing.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States This item is one 2MT Crotch Center. Nothing else included. This item is one Crotch Center. Made by Dave from YouTube's Crafted Channel. I own many Atlas ... morelathes on which to test my parts. I have run plastic parts including my ABS gears and change gear bushings for over 4 years making big cuts.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States From the operators position this is the left hand most gear on the spindle which drives your reverse tumbler gears / Change gear part of your geartrain. ... moreIn every photo, the scriber is pointed to the item you are buying.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Brand new. No time wasted with shims. All working parts hardened and precision ground. Piston type tool post are precision engineered to ... moreassure repeatability accuracy. Piston type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12". .
Buy It Now
$5.75 Shipping Condition: Used Location: Merrimack, United States Crafted from zamak, a durable alloy known for its strength and resistance to corrosion, this support bracket is a crucial component in ensuring the smooth ... moreoperation of the lathe's lead screw. Quality part ready to use.
Buy It Now
Free Shipping Condition: New Location: Fountaintown, United States Atlas 10" and Craftsman 12" Listed below. · Atlas Lathe 6 mounting instructions PDF. Atlas Lathe 6 threading chart JPEG. Atlas Lathe 6 lube and speed ... morechart PDF. Atlas 10 mounting instructions PDF. Atlas 10 oiling chart from original PDF.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States However, as always use carefully and at your own risk. Always unplug your lathe and wear safety glasses when using tools. My Craftsman / Atlas 618 in ... morephotos. I am the inventor of this product because one of my lathes inexplicably developed a stuck chuck!
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Made by Dave from YouTube's Crafted Channel. I own many Atlas lathes on which to test my parts. I have run plastic parts including my ABS gears and Bushings ... morefor over 4 years making big cuts. EVERY BUSHING HAS BEEN FIT through a factory gear and over a factory 9-73A Sleeve.
Buy It Now
Free Shipping Condition: New Location: Fountaintown, United States Here is list of Craftsman 12" lathes models known to fit and built by Atlas press Co. MADE IN USA using SAE F-5 Felt heavy-duty wool industrial felt. ... moreSlightly less dense than harder F-1 and F-3 felts, F-5 is an ideal felt for wipers, grease retainer washers, wicks, and vibration mountings.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bracket and bushing which supports your cross-feed bevel gear. 10 and 12" Atlas and Craftsman Lathes. Part body is tough ABS with drilled Oilite bushing ... moreinstalled. Hole in body bushing is pressed into is machined on my Atlas lathe, NOT thrown together as printed.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 40 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 16-32 Tooth Change Gear For Atlas and Craftsman 10 and 12" lathes. Bronze bushed superior to original gear. Made by Dave from ... moreYouTube's Crafted Channel. I own many Atlas lathes on which to test my parts.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 24 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Made by Dave from YouTube's Crafted Channel. I own many Atlas lathes on which to test my parts. I have run plastic parts including my ABS gears and Bushings ... morefor over 4 years making big cuts. EVERY BUSHING HAS BEEN FIT through a factory gear.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Made by Dave from YouTube's Crafted Channel. I own many Atlas lathes on which to test my parts. I have run plastic parts including my ABS gears and Bushings ... morefor over 4 years making big cuts. EVERY BUSHING HAS BEEN FIT through a factory gear.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States EVERY unit has been trial fit in a 2MT bore. This item is one 2MT Drill Pad. Nothing else included. This item is one drill pad. One NEW MANUFACTURED ABS ... moreDrill Pad with #2 Morse Taper stem. Use this when you must use your lathe as a drill press.
Buy It Now
$5.65 Shipping Condition: New Location: Fountaintown, United States This gives correct OEM full thick of Approx O.315+ 25% more felt and more protection than 1/4" felt (not full thick ). Here is list of Craftsman 12" lathes ... moremodels built by Atlas press Co. Precision Made of 100% Wool Felt felt of know Quality in USA.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Might be compatible with very early 9" and other similar size lathes. Part body is tough ABS with steel reinforcing pins inside each of the two handles. ... moreBoth bore and key-way are machined. You see it on my 10" Atlas which I refer to as the Old Gray Lady in my YouTube videos (Crafted Channel).
Buy It Now
Free Shipping Condition: New Location: Dayton, United States These are not for the 6" lathe (618 lathe). The reverse tumbler are often the most worn gears on your lathe. Update your lathe with a new set. This item ... moreis one pair of reverse tumbler gears for 10 or 12" Atlas/Craftsman lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States NEW MANUFACTURED ABS Gear. Useful on Craftsman and Atlas 10" and 12" change gear lathes. Late and F model lathes have. 35"~ tooth face. "Alien" gear not ... moreoriginally available. 8.062" od. You won't be disapointed in the performance of this gear.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS M6-16 Lead Screw Bracket For Atlas and Craftsman 6" Lathes manufactured by Atlas. Part number on lathe will begin 101 or 618 ... moreand lathe will have 6" swing. Bracket only, not an entire lathe.
Buy It Now
$9.10 Shipping Condition: Used Location: Eldred, United States Used Atlas 990-264 gear. this is an original part made from original materials.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 54 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
$9.10 Shipping Condition: Used Location: Eldred, United States Used Atlas 990-264 gear. I don't see any wear on this gear. this is an original part made from original materials.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States #1 Lever installed on my Atlas QC42 10" lathe. #4 Lever installed on my Atlas QC42 10" lathe. Broken, corroded or missing 1/2 Nut lever got you down?. ... moreFits Atlas Craftsman 9, 10 am12" lathes with 3/8" square drives which is all of them as far as I know.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 32 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States I theorized the 0XA would fit many 4" lathes. I've seen one on an Atlas 10" and it's just too small. Generally speaking if your lathes swing is 9"-12", ... moreyou should go with AXA. At 13"-14", go with BXA.
Buy It Now
$4.62 Shipping Condition: Used Location: Grand Rapids, United States The Atlas 3/8-18 NPTF-LI Pipe Thread Gage is an inspection gauge designed for metalworking applications. It is a thread gauge specifically crafted for ... moreinspecting 3/8-18 NPTF-LI pipe threads. The gauge is made by Atlas, a reputable brand in the metalworking industry.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 36 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
$4.50 Shipping Condition: Used Location: Diamond Point, United States Includes photos and a bit of info on the Atlas F Series, South Bend Tool Room Bench lathe, Sheldon 12" U-type, LeBlond 13" Super Regal, Monarch model ... moreW, Warner and Swasey 2-A Universal. Discover a Wealth of How-to Projects.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States NEW MANUFACTURED ABS Gear. Useful on Craftsman and Atlas 10" and 12" change gear lathes. Late and F model lathes have. 35"~ tooth face. "Alien" gear not ... moreoriginally available. 6.373" od. Bored and broached for a perfect fit.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States I theorized the 0XA would fit many 4" lathes. I've seen one on an Atlas 10" and it's just too small. Generally speaking if your lathes swing is 9"-12", ... moreyou should go with AXA. At 13"-14", go with BXA.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 44Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 46 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS 52 Tooth Change Gear For Atlas and Craftsman 9, 10 and 12" lathes. Replace missing gears from your Atlas / Craftsman change gear ... morelathe or use to create or expand gear ratios for your Quick Change lathe.
Buy It Now
$26.30 Shipping Condition: Used Location: Westland, United States Has been repaired but doesn't effect operation. see pictures for condition.
Buy It Now
$19.15 Shipping Condition: Used Location: Washington, United States Just removed from a Atlas QC 54 working lathe we are parting out. With 9-95A hindge. See pictures for condition.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States From the operators position this is the left hand most gear on the spindle which drives your reverse tumbler gears / Change gear part of your geartrain. ... moreIn every photo, the scriber is pointed to the item you are buying.
|
|
|
|
Albrecht 1/32-1/2" Mt2 Drill Chuck For Metal Lathe 1-13Mm Southbend Atlas Crafts
Nice smooth operating albrecht drill chuck. Very tips of the jaws have mars but still functional. Posted with
|
|
|
Atlas/Crafts. 10" / 12" Lathe- # 10A-2B Headstock Asse. Babbit Bearing / XJ 1
Hello Folks. This Headstock Assembly, Part# 10A-2B is used, no damages, Babbit Bearing Model, has great gears, Spindle threads show no damages, pulley looks great, good Gates belt, ready to use. Please check out our Ebay store for other great buy s. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe- 2" Atlas Badge with Pins / XJ 34
Hello Folks. Today we have an original 2" Atlas Badge for the Atlas& Craftsman 10" 12" Lathes, please see all pics. This badge is original, and is used with lots of wear. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe- Gear Guard Knob w/ Spring / XJ 33
Hello Folks. Today we have an original Gear Guard Knob with spring for the Atlas& Craftsman 10" 12" Lathes. This Gear Guard Knob is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 10-99A Threading Chart w/ Pins / XJ 32
Hello Folks. Today we have a Threading Chart with Pins for the Atlas& Craftsman 10" 12" Lathes, Part# 10-99A. This Chart is used, and has no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 9-95A Gear Cover / Guard Bracket / XJ 31
Hello Folks. Today we have a Gear Cover/ Guard Bracket for the Atlas& Craftsman 10" 12" Lathes, Part# 9-95A. This Gear Cover/ Guard Bracket is used, and has no damage. It has been repainted a gray color. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 9-42A / M6-44 / M6-45 Tailstock Ram Lock / XJ 30
Hello Folks. Today we have a Tailstock Ram Lock for the Atlas& Craftsman 10" 12" Lathes, Parts# 9-42A, M6-44, and M6-45. This Tailstock Ram Lock is used, and has no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 9-23, 9-8, 10D-34 Ram/ Screw/ Handwheel / XJ 29
Hello Folks. Today we have a Ram/ Screw/ Handwheel for the Atlas& Craftsman 10" 12" Lathes, Part# 9-23, 9-8, and 10D-34. This Part is used, and has no damage; there is some discoloration on ram end, please see close up pics. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 9-20 Vertical Countershaft & Motor Mount / XJ 28
Hello Folks. Today we have a Vertical Countershaft& Motor Mount for the Atlas& Craftsman 10" 12" Lathes, Part# 9-20. This Part is used, and has no damage. It has been repainted a gray color. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe 10F-9 Saddle w/ Gib & Screws/ Bearing Plates / XJ 27
Hello Folks. Today we have a Saddle with Gib& Screws/ Bearing Plates for the Atlas& Craftsman 10" 12" Lathes, Part# 10F-9. This Part is used, and has no damage, and includes the Saddle casting, 2 Bearing plates with shims, and Gib and 4 screws. The original paint on this part is mostly gone. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees ... morecharged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe - Apron w/ Scroll & Feed Gear / XJ 26
Hello Folks. Today we have a Apron with Scroll& Feed Gear for the Atlas& Craftsman 10" 12" Lathes, Parts# 10F-9A, 341-057, and 10D-38. This Apron with Scroll& Feed Gear is used, and has no damage, and includes the Apron with both mounting screws, feed gear with knob that works properly, and the scroll with handle that also works properly. The original paint on this part is peeling. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding ... moreit then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f1773bfc4-0x101-
|
|
|
Atlas Crafts.10"/12" Lathe # 9-303 Tool Post Slide w/ Gib & Screw / XJ 25
Hello Folks. Today we have a Tool Post for the Atlas& Craftsman 10" 12" Lathes, Part# 9-303. This part is used, and has no damage, and includes the Tool Post Slide Casting, Gib, and 3 screws with nuts. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 10-302 Upper Swivel with Pins / XJ 23
Hello Folks. Today we have a Upper Swivel for the Atlas& Craftsman 10" 12" Lathes, Part# 10-302. It is used, and has no damage, and includes set screws and pins. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f1773bfe6-0x102-
|
|
|
Atlas Crafts.10"/12" Lathe # 10-301 Lower Swivel / XJ 22
Hello Folks. Today we have a Lower Swivel for the Atlas& Craftsman 10" 12" Lathes, Part# 10-301. It is used, and has no damage. This is the Swivel Casting with 4 screws, but only 3 nuts. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 10-301 Lower Swivel w/ Gib & Screw / XJ 21
Hello Folks. Today we have aLower Swivel with Gib& Screw for the Atlas& Craftsman 10" 12" Lathes, Part# 10-301. It is used, and has no damage. There is some minor surface rust that you will need to clean from it. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f1773bfb2-0x107-
|
|
|
Atlas Crafts.10"/12" Lathe # 9-13 / 10F-12 Split Nut & Guide / XJ 20
Hello Folks. Today we have a Split nut& Guide for the Atlas& Craftsman 10" 12" Lathes, Part# 9-13/10F-12. It is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe #10F-11/ 341-057/ 9-102-12S Traverse Gears / XJ 19
Hello Folks. This is Atlas Craftsman Part: Traverse Gear& Case, Parts included are: 10F-11, 341-057, 9-102-12S for an Atlas& Craftsman lathe 10" 12" It is used, and in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe # 341-051 / 046-036 Mitre Gear & Bearing Asse./ XJ 18
Hello Folks. This Part is used, and is in good condition, no damages, and includes: Mitre Gear part# 342-051, Bearing 046-036, Collar 10F-71, bolt. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe- #990-264 Mitre Gear w/ Stud / XJ 17
Hello Folks. This Mitre Gear with Stud is Part# 990-264. It is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe- # 9-102-12S / 9-67 Handwheel Shaft & Gear / XJ 16
Hello Folks. This Handwheel Shaft& Gear is Part# 9-102-12S/ 9-67. It is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f1773bf83-0x107-
|
|
|
Atlas Crafts.10"/12" Lathe- # 10D-262 Crank Nut / XJ 15
Hello Folks. This Crank Nut is Part# 10D-262. It is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe- # 9-14 Carriage Lock - Bolt & Clamp / XJ 14
Hello Folks. This Carriage Lock- Bolt& Clamp is Part# 9-14. It is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe 10D-308 Compound Rest Handle / XJ 13
Hello Folks. This Compound Rest Handle is Part# 10D-308. It is used, and handles are slightly tilted inward, please see pics. 3/8" Bore with Keyway Slot. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe 10F-36 & 10F-19 Crossfeed Screw & Nut / XJ 12
Hello Folks. This Crossfeed Screw and Nut This part is used, and is in good condition. I tested this nut and measured 1/64th movement on screw. Has minor surface rust& discoloration on collar and dial area. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe - 10F-19 Crossfeed Nut on Lower Swivel / XJ 11
Hello Folks. This is Part# 10F-19 Crossfeed Nut on Lower Swivel. This part is used, and is in good condition. I tested this nut and measured 1/32 nd. movement on screw. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Crafts.10"/12" Lathe #10F-305 / #9-306 Compound Rest Screw & Nut/XJ 10
Hello Folks. This Compound Rest Screw& Nut is a used part in good condition, no damages. I would say 1/64" play in nut movement. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f1c20bced-0x105-
|
|
|
Atlas / Crafts. 10"/12" Lathe - # 9-23 Handwheel w/ Handle 4" Dia. x 3/8"/ XJ 8
Hello Folks. This# 9-23 Handwheel with handle is used without damage; has some plating wear on handle, and wheel is slightly rough on plating finish. 4" diameter x 3/8" Bore with Keyway Slot. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f1c20bd54-0x106-
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-304 Tool Post Gib / XJ 53
Hello Folks. Today we have a Tool Post Gib for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is Part# M6-304,and this part is used, and in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-301 Compound Lower Swivel / XJ 52
Hello Folks. Today we have a Compound Lower Swivel with all 3 Gib Screws& Nuts for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is Part# M6-301,and this part is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-302 Compound Upper Swivel w/ Pin / XJ 51
Hello Folks. Today we have a Compound Upper Swivel with Pin for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is Part# M6-302, Upper Swivel with both Pins& Set Screws. It is used, and in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-14 Carriage Lock / Clamp XJ 50
Hello Folks. Today we have a Carriage Lock/ Clamp for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is Part# M6-14. It is used, and in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-44 & 45 Tailstock Lock & Sleeve / XJ 49
Hello Folks. Today we have a Tailstock Lock& Sleeve for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. These are Parts# M6-44& M6-45; used, and in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-7 Tailstock Clamp & Bolt / XJ 48
Hello Folks. Today we have a Tailstock Clamp& Bolt for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is Parts# M6-7, it is used and has no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f1e5a5519-0xe4-
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-34 Tailstock Screw & M6-8 Ram / XJ 47
Hello Folks. Today we have a Tailstock Screw& Ram for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. These are parts# M6-34 and M6-8, it is used and has no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f1e5a536b-0xf1-
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-27 Bearing Lead Screw / Gear End / XJ 57
Hello Folks. Today we have a Bearing Lead Screw/ Gear End for the Atlas/ Craftsman 6" Lathe, Model# 101.21400, this is Part# M6-27. This part is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-9 Carriag/ Saddle w/ Scroll... / XJ 59
Hello Folks. Today we have a Carriage/ Saddle with Scroll& Bearing Plates& Shims, 4 Gib Screws with Nuts. Parts included are: M6-9 Carriage, M6-54& 55 Bearing Plates& Shims, 4 Gib Screws with Nuts, M6-29 Half Nut Lever, M6-38 Half Nut Cam/ Scroll- for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This part is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report ... moreall unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-263 Low Profile Crank Nut / XJ 56
Hello Folks. Today we have a Low Profile Crank Nut for the Atlas/ Craftsman 6" Lathe, Model# 101.21400, this is Part# M6-263. This Low Profile Crank Nut is made of steel; it is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-25 Change Gear Bracket / Banjo / XJ 46
Hello Folks. Today we have a Change Gear Bracket/ Banjo for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is part# M6-25, it is used and has no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-37 Chip Guard - Compound Rest / XJ 45
Hello Folks. Today we have a Chip Guard- Compound Rest for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This Chip Guard- Compound Rest is a used part that has no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-36A Carriage / Saddle Screw / XJ 44
Hello Folks. Today we have a Carriage Saddle Screw for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. Included are Parts: M6-19A- Nut, M6-36A- Carriage Screw, and# M6-17- the Dial. The part is used, and has no damages, there is less than 1/64 movement in nut. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-305 Tool Post Screw w/ Nut / XJ 43
Hello Folks. Today we have a Tool Post Screw with Nut Part# M6-305 for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This Tool Post Screw with Nut is used, and has no damages, there is less than 1/64 movement in nut. There is light surface rust in spots on screw. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-23 Handwheel w/ Handle / XJ 42
Hello Folks. Today we have a Handwheel with Handle- 2 3/4" diameter, Part# M6-23 for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This Handwheel with Handle is used, and has no damages. The handle shows some plating wear, 3/8" Bore with Keyway slot. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # M6-67 Shaft & Pinion - Carriage Travel/ XJ 40
Hello Folks. Today we have a Shaft& Pinion-Carriage Travel- Part# M6-67 for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This part is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts. # 101.21400 Lathe 6" - # M6-11 Gearcase / Traverse Gears / XJ 39
Hello Folks. Today we have a Gearcase/ Traverse Gears- Part# M6-11 for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This part is used, and is in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts. # 101.21400 Lathe 6" - Threading Dial w/ Bolt / XJ 38
Hello Folks. Today we have a Threading Dial with Bolt for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This Threading Dial is used, with no visible wear on gear. It takes effort to turn by hand, and may need adjustment or oil hole drilled into body to lube. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts. # 101.21400 Lathe 6" - # M6-12A Half /Split Nuts Pair -/ XJ 37
Hello Folks. Today we have a 2- Half/ Split Nuts- Part# M6-12A for the Atlas/ Craftsman 6" Lathe- 101.21400. This part is used, and in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" #M6-2X Headstock Assembly w/ Back Gear / XJ 62
Hello Folks. Today we have a Headstock Assembly with Back Gear, Part# M6-2X- Atlas Parts# M6-2 Ball Bearing Headstock, M6-243X Back Gear Assembly, and# M6-22 Gear Cover for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This part is used, and has no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" #9-23 Handwheel 4" Dia. Tailstock/Apron / XJ 63
Hello Folks. Today we have a Handwheel 4" Diameter Tailstock/ Apron, Part# 9-23 for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This part is used, and has no damage, only minor wear on plating, 3/8" Bore with Keyway Slot. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" # L9-35 Lead Screw - 31" Long / XJ 61
Hello Folks. Today we have a Lead Screw that is 31" Long for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. This is part# L9-35, it is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts.#101.21400 Lathe 6" Tailstock Guide Set Screw w/ Dog Pt. / XJ 60
Hello Folks. Today we have Tailstock Guide Set Screw with Dog Pt. Part# 102806 for the Atlas/ Craftsman 6" Lathe, Model# 101.21400; it includes the lock nut. This part is used, and is in good condition, no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas/Crafts. # 101.21400 Lathe 6"- # M6-12A Half /Split Nuts & # M6-13A / XJ 36
Hello Folks. Today we have a Half/ Split Nuts& Guide with screws. Parts included are 2# M6-12A Half Nuts& 1# M6-13A Guide with screws. These parts are for the Atlas/ Craftsman 6" Lathe, Model# 101.21400. They are used with no damage. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-140313c03d5-0xed-
|
|
|
Atlas/Crafts. # 101.21400 Lathe 6" - # M6-28 Gear Guard Cover w/ .../ XJ 35
Hello Folks. Today we have a Gear Guard cover with Threading Chart for the Atlas/ Craftsman 6" Lathe# 101.21400. This Gear Guard is Part# M6-28 with Bracket Part# M6-95 and Thread Chart- M6-99A. The original knob and latch are still intact on this part; it is used, in good condition, no damages. Pl ease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged ... moreto us by Ebay.
|
|
|
Armstrong Threading Tool Holder for Lathe,South Bend,Atlas/Crafts,Logan,Enco
Excellent Armstrong Threading Tool Holder#50 for Lathe with Unsharpened US Standard Threading Tool 7/8" x 3/8" Shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong Knurling Tool Holder for Lathe,South Bend,Atlas/Crafts,Logan,Enco
Excellent Armstrong Knurling Tool Holder#2040 for Lathe with Medium diagonal Knurls 3/4" x 3/8" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
RH Armstrong Cut Off Tool Holder for Lathe,South Bend,Atlas/Crafts,Logan,Enco
Excellent RH Armstrong Cut Off Tool Holder#2020R for Lathe 3/4" x 3/8" shank. 9/16" tool capacity, includes cut off tool. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Atlas/Crafts.10" & 12" Lathe #10-25OX Back Gear Asse. ( Not Complete ) / MY 221
Hello Folks. This Assembly is used, and is not a complete assembly, it is missing one mounting bracket. Large gear is in great condition, but the smaller gear has chipping on the tooth's edges, please see close up pic. Please check out our Ebay store for other great buy s. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
 |