|
Lathe Dog Drive Plate D1-3 Camlock Clausing Lathe
Beautiful old quality lathe dog driver or drill and mount your own plate. Flange face is 5" diameter x 1/2" thick. taper. Threads and pins are in like new condition. PLEASE READ BEFORE YOU PURCHASE OR BID) BUYER OR HIGH BIDDER CAN PURCHASE ITEMS USING PAYPAL AND PAYS ACTUAL SHIPPING COST OR AS NOTED BELOW.IF YOU HAVE NEGATIVE FEEDBACKS. PLEASE MOVE ON. HI,AK,PR AND INTERNATIONAL SHIPPING(IF APPLIES) MAY COST EXTRA.BAR CODE TRACKING OF PACKAGES HAS BEEN A GREAT ASSET TO US ALL BUT LOSSES STILL DO HAPPEN BEYOND MY CONTROL. PLEASE CONSIDER SHIPPING INSURANCE AS I WILL NOT BE RESPONSIBLE WHEN OR IF THIS SHOULD HAPPEN. JUST ASK ME TO INCLUDE IT TO YOUR INVOICE PRIOR TO PAYMENT. PLEASE CLICK-ENLARGE- TO SEE A BIG CLEAR PICTURE. AS ALWAYS I WILL LEAVE A POSITIVE FEEDBACK UPON RECEIVING ONE. DO NOT PURCHASE IF YOU HAVE NO INTENTION OF PAYING ... moreFOR THE ITEM. I DO INFORM EBAY OF THESE BUYERS SO PLEASE DON'T. CHECK OUT MY STORE AND FEED BACKS. Check out my!
|
|
|
Bonney Lathe Dog 3/4" Mount Used
Bonney Lathe Dog 3/4" Mount See pictures for condition. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder ... morewithin 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact our offices at 815-758-6534 or me personally at(815) 299-7625 Monday
|
|
|
VULCAN No. 3 BENT TAIL LATHE DOG 3/4" USA
NICE OLD VULCAN#3 BENT TAIL LATHE DOG WITH SETSCREW. 3/4" USA
|
|
|
JH Williams Vulcan No. 10 Lathe Dog 3"
Welcome! Up for sale is a JH Williams Vulcan No. 10 Lathe Dog 3" Used in good condition. Feel free to email any questions! SCT2054
|
|
|
LATHE DOG, 3/4" ROUND CAP., USED.
CONDITION; USED. LATHE DOG. 3/4" ROUND CAPACITY FORGED STEEL. LOOK AND BID WITH CONFIDENCE. MY GOAL IS TO MAKE EVERY SALE A POSITIVE ONE. FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BENT TAIL LATHE DOG 3-1/2"
BENT TAIL LATHE DOG 3-1/2"
|
|
|
D1-3 Camlock 10" Metal Lathe Face Plate Dog Drive USA Made
D1-3 Camlock 10" Metal Lathe Face Plate Dog Drive USA Made Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge D1-3 Camlock 10" Metal Lathe Face Plate Dog Drive USA Made Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
|
|
|
LATHE DOG, 3-1/2" ROUND CAP., USED.
CONDITION; USED. LATHE DOG. 3-1/2" ROUND CAPACITY FORGED STEEL. LOOK AND BID WITH CONFIDENCE. MY GOAL IS TO MAKE EVERY SALE A POSITIVE ONE. FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LATHE 6" DOG DRIVE FACEPLATE 2 3/8" X 8 TPI CLAUSING LOGAN SOUTH BEND ATLAS
LATHE 6" DOG DRIVE FACEPLATE 2 3/8" X 8 TPI NO REPAIRS. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
INTERAPID SWISS MADE 3/8" DOG-LEG STANDARD SHANK VINTAGE MILL LATHE BENCH CNC!!!
Welcome to TNGTOOL'S Sunday night at 8PM, 7 day auctions. Last weeks auctions auction close one minute apart and new ones begin. Auction's starts at 8:00P.M. Eastern time. A new auction every minute. All of my tool auctions come with TNGTOOL'S satisfaction guarantee and EBAY'S EZ returns! You can return any tool you are not happy with. You are buying from a 30+ year toolmaker here who knows what he has and is selling! I also have my own machine shop if precision surface grinding is needed. INTERAPID SWISS-MADE DOG-LEG. TOOL HAS STANDARD 3/8" SHANK X 5-1/4" LONG AS SHOWN. EXTREMELY $$$$ WHEN NEW! THANKS FOR LOOKING! For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within ... more3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. SEE OUR STORE! STARRETT 6" SCALE IS NOT INCLUDED. FEEDBACK: I leave feedback on all of my transactions once the transaction is complete. What this means is that when you have received your item and have left feedback stating that you are satisfied. I will then leave appropriate feedback finalizing the transaction. I DO NOT leave feedback when payment arrives as that is only half of the transaction and it wouldn't be fair to either party to leave feedback before both of us are satisfied.
|
|
|
LATHE GRINDER DRIVE DOG 2 9/16" MAX DIA 5 5/8" LONG X 3/4" WIDE #52166
LATHE GRINDER DRIVE DOG 2 9/16" MAX DIA 5 5/8" LONG X 3/4" WIDE USED ITEM MAY SHOW SIGNS OF USE INVENTORY#52166 Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
JH WILLIAMS LATHE DOG 3/4 "
GREAT lightly USED vulcan LATHE DOG I have 4 JH Williams Co. VULCAN lathe dogs in total. And i will gladly combine shipping should u want the"package"
|
|
|
J.H. WILLIAMS No10 BENT TAIL LATHE DOG 3"
J.H. WILLIAMS No10 BENT TAIL LATHE DOG 3"
|
|
|
5" Dog Plate D1-3 Cam Lock Mount, from Monarch 10EE Lathe D1 - 3
5" Dog Plate D1-3 Cam Lock Mount. From Monarch 10EE Lathe D1- 3 Posted with
|
|
|
USED Hall LATHE DOG 3" USA GOOD CONDITION
You re bidding on a Hall lathe dog. It has two side shims for additional adjustment. The dog is 14" overall
|
|
|
USED LATHE DOG STRAIGHT TAIL USA 3-5/8" 761
YOU ARE BIDDING ON ONE USED LATHE DOG STRAIGHT TAIL USA 3-5/8" DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LeBlonde 17x54 Lathe - w/ 4 jaw, 3 jaw chucks, dog plate, steady rest, centers
Please don't just click watch and let this get away! Make an offer! Any offer! You might be very surprised at what I will take! LeBlonde lathe. 17x54. 1.25 hp 3 phase. Morse taper 5 tail stock. 2" head. Believe it also has a#5 taper. Can add an adapter to use 5C collets, but I do not have one. The ways are very tight, probably not used much before I got it. What you see I the photos are what you get. Power feed in both directions and threading built in. Comes with 3 jaw. 4 jaw, steady rest, dog plate. Also with Jacobs drill chuck, dead center and live center as shown. Local pickup only. Can transport on a 2 axle car trailer. Probably 3500 lbs. I moved using a lawn tractor and iron bar, will help you load. Mounted on casters, easily removable for transport and use. Please let me know any Questions. Make an offer! You might be surprised! ... moreSee this link for more info on LeBlonde lathes of this era: http:www.bbssystem.com/manuals/Running-a-Regal.pdf Posted with:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1442dde57dd-0xf2-
|
|
|
6" DOG DRIVE FACEPLATE 1 3/4" X 8 TPI SOUTH BEND ATLAS LOGAN CLAUSING LATHE
6" DOG DRIVE FACEPLATE 1 3/4" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
THREADED MOUNT 3"-5" LATHE DOG DRIVE PLATE 9-3/4 DIAMETER
THREADED MOUNT 3"5" LATHE DOG DRIVE PLATE 9-3/4 DIAMETER NOT 100% SURE ON THREAD SIZE
|
|
|
J.H. Williams Vulcan No.11 , 3 1/2" Bent Tail Lathe Drive Dog
OFFERED: J.H. Williams Vulcan No.11, 3 1/2" Bent Tail Lathe Drive Dog ABOUT 10 POUNDS PACKED. SHIPPING $11.00 ANYTOWN USA. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
J&S lathe DOG, LOT OF 3 1-1/2, 2, AND 2 1/2 SIZE BENT TAIL - V/CLEAN
OFFERED: J&S lathe dog. LOT OF 3 1 2/2, 2, AND 2 1/2 SIZE BENT TAIL- V/CLEAN. 3 LATHE DOGS 1 BIS. SHIPPING $11.00 ANYTOWN USA. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
J.H. WILLIAMS / VULCAN No. 7 BENT TAIL LATHE DOG 1 1/2" LOT OF 3
OFFERED: LOT OF 3- AS SHOWN. 1 1/2" J. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
J.H. WILLIAMS / VULCAN No. 10 BENT TAIL LATHE DOG 3"
OFFERED: J.H. WILLIAMS/ VULCAN No10 BENT TAIL LATHE DOG 3" SHIPPING AT 6 POUNDS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
lot of 6 small diameter LATHE FACEPLATE DOG 1/2", 3/4", 1" etc CAPACITY
OFFERED: y ou get whats shown in photo LOT OF 6 ARMSTRONG LATHE FACEPLATE DOG and others. Bent leg lathe dog fair to GOOD CONDITION. SHIPPING $5.00 ANYTOWN USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Southbend Dog Leg Faceplate 8 Inch. 2 3/8-6 Lathe Victor Clausing
8 inch dog leg faceplate. Has 2 3/8-6 threads. I bought two. Only need one. It is used. Thanks for looking Posted with
|
|
|
6" lathe dog drive plate 1 3/4" 8 tpi
6" lathe dog drive plate 1 3/4" 8 tpi in very good condition. Thanks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1453bad391b-0x107-
|
|
|
2 HEAVY CAST IRON MACHINING LATHE DOG / #4 and #301-3/4"
2 HEAVY CAST IRON MACHINING LATHE DOG/ The smaller is marked: NO 301 3/4" The larger is simply marked: 4.
|
|
|
LATHE DOG Bent Tail 9" x 6" with 3 5/8" Diameter Hole Large and Heavy Duty
LATHE DOG Bent Tail 9" x 6" x 3 5/8" Large and HD LATHE DOG Bent Tail measures 9" x 6" body without the clamping bolt. Has a 3 5/8" Diameter Hole Large and HD Will package multiple won auctions together to help you save on the by weight shipping cost All Sales are as-is and are Final 20% Restocking Fees apply NO refund on shipping either way
|
|
|
LOT (4) TTC Lathe Dog (2) J-S 1" 01736803 (2) J-S 3/4" 0173
LOT(4) Lathe Dog(2) J-S 1" 01736803(2) J-S 3/4" 0173
|
|
|
Vulcan No.3 Vintage Lathe Dog
Marked Vulcan 3. All good. Call 207-943-5671 or email regarding purchases or questions. For pick-up we are 4 1/2 hrs north of Boston. 2 1/2 hrs Portland, 1 1/2 hrs Augusta. We travel to Mass. frequently.
|
|
|
10 12 ATLAS CRAFTSMAN LATHE 9-365 DOG DRIVE 8 3/4" FACEPLATE SOUTH BEND LOGAN
10 12 ATLAS CRAFTSMAN LATHE 9-365 DOG DRIVE FACEPLATE 8 3/4" 1 1/2 X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING ... moreWHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
USED WILLIAMS BENT TAIL LATHE DOG 1-3/4" USA 734
YOU ARE BIDDING ON ONE USED WILLIAMS BENT TAIL LATHE DOG 1-3/4" USA DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND 9" LATHE DOG SET 1 3/8" - 1 1/8" - 7/8" - 5/8"
SOUTH BEND 9" LATHE DOG SET 1 3/8" 1 1/8" 7/8" 5/8" Brand South Bend Packaging None Condition Excellent Quantity 4 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
7 3/4" DOG DRIVE FACEPLATE SOUTH BEND ATLAS CRAFTSMAN LOGAN CRAFTSMAN LATHE
7 3/4" DOG DRIVE FACEPLATE 1 1/2" X 8 TPI MARKED LFP 1004 410 NK EXCELLENT CONDITION IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL ... moreCOMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-1473cc9df48-0x107-
|
|
|
5 3/4" DOG DRIVE FACEPLATE SOUTH BEND ATLAS CRAFTSMAN LOGAN CRAFTSMAN LATHE
5 3/4" DOG DRIVE FACEPLATE 2 1/4" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1473ccdba56-0x119-
|
|
|
BENT TAIL LATHE DOG 3 INCH
Up for sale is a 3"bent tail lathe dog. Item is in good usable condition. Item only markings are 3 for size and a B in a triangle.
|
|
|
Lathe Dog Drive Plate L00 Mount 8-1/2 dia. 1" Slot Threaded Area is 3-3/4 dia.
Lathe Dog Drive Plate L00 Mount 8-1/2 dia. 1" Slot Threaded Area is 3-3/4 dia. Good useable condition Comes as shown in photos. Please look carefully at the photos. Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
WILLIAMS VULCAN 3" HEAVY DUTY DROP FORGED LATHE DOG
Made in U.S.A by Williams This is a Drop Forged Steel Lathe Dog in Good condition. Model# 10 Specifications: Size: 3" Comes as shown in picture.
|
|
|
Armstrong No.3 3/4" Bent Tail Lathe Drive Dog
capacity 0.805" 0.708" thick body, 7/16" square head set bolt, Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
JH WILLIAMS BENT TAIL LATHE DOG No 10 3"
JH WILLIAMS BENT TAIL LATHE DOG No 10 3"
|
|
|
Lathe dog 3/4" USA 301
Lathe dog 3/4" USA 301 Good usable condition Comes as shown in photos. Please look carefully at the photos Will ship by USPS First Class Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
STRAIGHT TAIL LATHE DOG machinist metal holder tool 3" inside ARMSTRONG No. 30
Good Used Lathe Dog Armstrong USA No. 30 Approx. 3 1/8" Inside Thank you for looking and Happy Bidding! Please check out my other items. I'm always willing to combine shipping to save my customers money! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lathe Carrier/Lathe Dog - Bent 1" x 3/4"
USED WHEN WORKING BETWEEN CENTERS ON A LATHE g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-149b4fc785b-0x108-
|
|
|
ORIGINAL 6 3/4" DOG DRIVE LATHE FACE PLATE COULD FIT ATLAS CRAFTSMAN SOUTH BEND
ORIGINAL 6 3/4" DOG DRIVE LATHE FACE PLATE WIDTH IS 13/16" 1 1/2" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE ... moreSHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-149c67fc73b-0x109-
|
|
|
13" Lathe dog drive face plate 3 - 1/4" 5 tpi spindle thread
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Lathe dog drive face plate almost 13" in diameter 3- 1/4" 5 tpi spindle thread Not 100% sure on the threading so check ALL pics Used. Good condition. check all pics feel free to ask any questions Weighs 30 Lbs All sales final! Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
MACHINIST TOOLS – LATHE DOG ARMSTRONG NO 13 (3 INCH) ATLAS LOGAN SOUTH BEND
MACHINIST TOOLS– LATHE DOG ARMSTRONG NO 13(3 INCH) ATLAS LOGAN SOUTH BEND CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO Will Combine Shipping– Email me and I will provide you an updated invoice. Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions
|
|
|
MACHINIST TOOLS – LATHE DOG WILLIAMS NO 64 (3 INCH) ATLAS LOGAN SOUTH BEND
MACHINIST TOOLS– LATHE DOG WILLIAMS NO 64(3 INCH) ATLAS LOGAN SOUTH BEND CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO Will Combine Shipping– Email me and I will provide you an updated invoice. Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions
|
|
|
LATHE DOG , CLAMP TYPE , 1 1/4 - 2 3/4"
HAS BRASS JAW INSERT. HAS BRASS END ON CENTER SCREW.
|
|
|
3/4" VULCAN DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN METAL LATHE
3/4" VULCAN DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN METAL LATHE LEG IS 3" TOP TO BOTTOM EXCELLENT CONDITION IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH ... moreCONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
3/4" USED LATHE DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN CLAUSING LATHE
3/4" USED LATHE DOG LEG IS 2 1/4" PLEASE SEE THE PICTURES THE DOG IS IN ROUGH CONDITION ON THE ONE SIDE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH ... moreCONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b3409977e-0x107-
|
|
|
Lathe Drive Dog 1-3/8 to 5/8
Lathe Drive Dog 1-3/8 to 5/8 Good usable condition Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
6" Atlas 618 Craftsman 101 Lathe 5 3/8 Inch Face Plate and 401-1 Lathe Dog
6" Atlas 618 Craftsman 101 Lathe 5 3/8 Inch Face Plate and 401-1 Lathe Dog
|
|
|
8" Face Plate / Dog plate 2 3/8" 6 spindle 13"/ 14" South Bend lathe
I got this in an auction lot supposing it was a fit for my heavy 10. But it's for 13" or 14" Southbend lathes. Threads and mating surface are in good condition. Old, US made cast iron with dog slot.
|
|
|
Armstrong lathe dog turning No.1 3/8 live dead center FREE SHIPPING!
FREE SHIPPING with buy it now. Selling a very nice Armstrong Number 1 lathe drive dog. 3/8 is the size maker on it. Ready to work!
|
|
|
3-1/2" MICROMETER V BLOCK LATHE GRINDING DOG
Micrometer Type V Block Lathe Dog 3-1/2" Max Dia. 3-3/4 Between V Centers Approx 1/8 Clamping Movement No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business ... moreday. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Unimat 3 Face Plate, Dead Centers, Lathe Dog
Unimat 3 Face Plate 14 x 1 mm threaded. Two Dead Centers and Lathe Dog
|
|
|
3 Machinist's Lathe Dog Tool Holders Bent Tail
For sale are 3 Machinist's Bent Tail Lathe Dogs. The one one the left is a Williams Vulcan no 2. The tail has had a piece weld on to make it longer. The middle one does not have a brand, it is marked 1 1/2" also has a part number but I can't make it out. The one on the right. Is marked Made in the USA 1 1/2 No. 6, does not have a brand on it. Some surface rust. Click on pictures to enlarge for more details Shipping is USPS Priority Mail to the USA Missouri Residents pay 8.35% sales tax.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14bb33a96f1-0x114-
|
|
|
Metal Lathe 5 1/8" Dog Face Plate 1 1/2" X 8 tpi and 3 Dogs South Bend Atlas
Metal Lathe 5 1/8" Dog Face Plate 1 1/2" X 8 tpi and 3 Dogs in excellent working condition I have a complete Heavy 10L that I will be breaking up in the next week so if you need anything message me and I will list it(including a taper attachment and collet closer) Also a 10K and 9A. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
|
|
|
7-3/8" LATHE DOG DRIVER FACEPLATE, 1-1/2"-8 TPI, ATLAS LOGAN SOUTH BEND
Face Plate 7-3/8 looks to be South bend Nice 7-3/8 inch face plate Ready to put on your lathe and use. Thanks for your Business! Shipping will be 12.00! God Bless!
|
|
|
6" lathe faceplate/dog plate 3/4" bore with setscrew
Very nice 6" cast iron faceplate/dog plate with a 3/4" bore with set screw(no threads) Ship lower 48 states only.
|
|
|
Atlas 618 Craftsman 101 5-1/4", 1" X 10 TPI Face Plate & 3/4" Lathe Dog
Please read the listing and view all pictures before you purchase this item. Offered for your consideration is a Atlas 618 Craftsman 101 5-1/4" 1" X 10 TPI Face Plate& 3/4" Lathe Dog. From the information I have found this chuck can be used on a Atlas 618 or a Craftsman 101 series lathe that has a 1" X 10 TPI spindle. This is in good used condition with the original key but does have some light surface discoloration from being in in storage. There are also a few minor scuff marks on this as can be seen in the pictures. I am not advertising this as being in 100% perfect condition because this has been used. Thanks for looking and let me know if you have any questions.
|
|