Holesaws

#MAX50-50

Holemaker TCT Cutter 50mm x 50mm DOC

As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate. These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and...

#SP16003

Holemaker Pilot Pin 6.34mm x 77mm (15-52mm x 25DOC) Holemaker Pilot Pin 6.34mm x 77mm (15-52...

Features: Ejects the slug at the end of the cut. Provides coolant feed into the centre of the cutter. Locates the centre of the cut.

#SP16004

Holemaker Pilot Pin 6.34mm x 102mm (15-52mm x 50DOC) Holemaker Pilot Pin 6.34mm x 102mm (15-5...

Features: Ejects the slug at the end of the cut. Provides coolant feed into the centre of the cutter. Locates the centre of the cut.

#SPFLUID

Holemaker Cutting Fluid 500ml

Features: Water soluble cutting fluid - mix 1 part oil, 8 parts water Formulated to extend tool life and improve surface finish Contains Corrosion Inhibitors to protect machine parts High resistance to bacterial & fungal growth Suitable for use with...

#SPFLUID1

Holemaker Cutting Fluid 1 Litre

Features: Water soluble cutting fluid - mix 1 part oil, 8 parts water Formulated to extend tool life and improve surface finish Contains Corrosion Inhibitors to protect machine parts High resistance to bacterial & fungal growth Suitable for use with...

#TAP10125E

Tap Magic EP-Extra Cutting Fluid 125ml

Features: TAP MAGIC EP-XTRA is highly effective for all cutting operations on all Metals. You will especially appreciate the performance of this cutting fluid on hard metals and with difficult extreme-pressure cuts of long duration. You will also note...

#TAP70016E

Tap Magic Extra Thick Cutting Fluid 472ml Tap Magic Extra Thick Cutting Fluid 472m...

While Tap Magic XTRA-THICK is highly effective for any cut on any metal, it is without equal when making cuts of long duration on the hardest metals such as inconel, titanium, stainless and other hardened steels.

#AS1225

Holemaker Silver Series Annular Cutter 12mm x 25mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process...

#AS1250

Holemaker Silver Series Annular Cutter 12mm x 50mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process...

#AS1350

Holemaker Silver Series Annular Cutter 13mm x 50mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process...

#AS1325

Holemaker Silver Series Annular Cutter 13mm x 25mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process...

#AS1450

Holemaker Silver Series Annular Cutter 14mm x 50mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process...