Comparison of benchtop pressure gradient measurements in 3D printed patient specific cardiac phantoms with CT-FFR and computational fluid dynamic simulations

Kelsey N. Sommer; Lauren Shepard; Vijay Iyer M.D.; Erin Angel; Michael F. Wilson; Frank J. Rybicki; Dimitrios Mitsouras; Kanako Kunishima Kumamaru; Stephen Rudin; Ciprian N. Ionita

doi:10.1117/12.2512118

15 March 2019 Comparison of benchtop pressure gradient measurements in 3D printed patient specific cardiac phantoms with CT-FFR and computational fluid dynamic simulations

Kelsey N. Sommer, Lauren Shepard, Vijay Iyer M.D., Erin Angel, Michael F. Wilson, Frank J. Rybicki, Dimitrios Mitsouras, Kanako Kunishima Kumamaru, Stephen Rudin, Ciprian N. Ionita

Author Affiliations +

Proceedings Volume 10953, Medical Imaging 2019: Biomedical Applications in Molecular, Structural, and Functional Imaging; 109531P (2019) https://doi.org/10.1117/12.2512118
Event: SPIE Medical Imaging, 2019, San Diego, California, United States

Abstract

Purpose: Various CT-FFR methods are being proposed as a non-invasive method to estimate cardiac disease severity. 3D printed patient specific cardiovascular models with high geometric accuracy can be used to simulate blood flow conditions and perform precise and repeatable benchtop flow experiments for validation of such methods. Materials and Methods: Twelve patient-specific 3D printed cardiac phantoms were created from CT Angiography (CTA) scans using a compliant 3D printing material. Pressure sensors were connected to the aortic root and distal ends of the three main coronary arteries to measure benchtop pressure gradients for each stenosed vessel. The patient geometries were used in Canon Medical Systems 1D fluid dynamics algorithm to calculate the CT- FFR. In addition, a 3D computational fluid dynamics simulation was done using ANSYS to estimate pressure gradients across the coronary arteries. Experimental data and 1D and 3D flow simulations were compared to the standard catheter lab FFR measurement (Invasive-FFR). Results: The average percent difference in Benchtop FFR/Invasive FFR, CT-FFR/Invasive FFR, and CFDFFR/Invasive FFR was 0.05, 0.06, and 0.07 respectively. The average time it took for the CT-FFR simulation was ~35 minutes and it took ~15 hours for the CFD-FFR simulation but can vary based on the number of iterations the user defines the software to run. Conclusions: Benchtop FFR proved to be highly accurate when compared to both 1D and 3D CFD software and therefore, 3D printing of patient specific coronary phantoms is a quality tool for CT-FFR software validation.

Citation Download Citation

Kelsey N. Sommer, Lauren Shepard, Vijay Iyer M.D., Erin Angel, Michael F. Wilson, Frank J. Rybicki, Dimitrios Mitsouras, Kanako Kunishima Kumamaru, Stephen Rudin, and Ciprian N. Ionita "Comparison of benchtop pressure gradient measurements in 3D printed patient specific cardiac phantoms with CT-FFR and computational fluid dynamic simulations", Proc. SPIE 10953, Medical Imaging 2019: Biomedical Applications in Molecular, Structural, and Functional Imaging, 109531P (15 March 2019); https://doi.org/10.1117/12.2512118

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available