Top > JRM > Pneumatically Driven Multi-DOF Surgical Forceps Manipulator wi ...

single-rb.php

JRM Vol.28 No.4 pp. 559-567
doi: 10.20965/jrm.2016.p0559
(2016)

Paper:

Views over last 60 days: 1,894

Pneumatically Driven Multi-DOF Surgical Forceps Manipulator with a Bending Joint Mechanism Using Elastic Bodies

Kyouhei Takikawa*, Ryoken Miyazaki*, Takahiro Kanno*, Gen Endo**, and Kenji Kawashima*

*Tokyo Medical and Dental University
2-3-10 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-0062, Japan

**Tokyo Institute of Technology
2-12-1 Ookayama, Meguro-ku, Tokyo 152-8552, Japan

Received:
January 25, 2016
Accepted:
May 31, 2016
Published:
August 20, 2016
Creative Commons License
Keywords:
surgical robot, forceps manipulator, flexible mechanism, pneumatic system, wire drive robot
Abstract
In this study, a pneumatically-driven forceps manipulator was developed for a master-slave-type surgical robot. The proposed manipulator had two flexible joints, one for the bending joint at the tip and the other for transmitting a bending force from the actuators to the wires of the forceps. The manipulator had two degree-of-freedoms (DOFs) of bending driven by only two pneumatic cylinders and a gripper driven by a cylinder. Given the interoperability in real surgery, a mechanism was proposed such that the clean forceps part could be easily attached to and detached from the filthy drive unit. An experiment of the master-slave-system was conducted with the proposed manipulator to verify the tracking performance of the cylinders’ position and the bending angle of the forceps manipulator.
Proposed pneumatically driven multi-DOF surgical forceps manipulator

Proposed pneumatically driven multi-DOF surgical forceps manipulator

Cite this article as:
K. Takikawa, R. Miyazaki, T. Kanno, G. Endo, and K. Kawashima, “Pneumatically Driven Multi-DOF Surgical Forceps Manipulator with a Bending Joint Mechanism Using Elastic Bodies,” J. Robot. Mechatron., Vol.28 No.4, pp. 559-567, 2016.
Data files:
References
  1. [1] R. Berguer, D. L. Forkey, and W. D. Smith, “Ergonomic problems associated with laparoscopic surgery,” Surgical Endoscopy, Vol.13, Issue 5, pp. 466-468, May 1999.
  2. [2] A. G. Gallagher, N. McClure, J. McGuigan, K. Ritchie, and N. P. Sheehy, “An Ergonomic Analysis of the Fulcrum Effect in the Acquisition of Endoscopic Skills,” Endoscopy, Vol.30, No.7, pp. 617-620, Sep. 1998.
  3. [3] R. A. Beasley, “Medical Robots: Current Systems and Research Directions,” J. of Robotics, Article ID 401613, 2012.
  4. [4] R. H. Taylor and D. Stioianovici, “Medical Robotics in Computer-Integrated Surgery,” IEEE Trans. on Robotics and Automation, Vol.19, No.5, pp. 765-780, 2003.
  5. [5] J. Rosen, B. Hannaford, and R. M. Satava, “Surgical Robotics Systems Application and Visions,” Springer, 2011.
  6. [6] M. Kitagawa, A. M. Okamura, B. T. Bethea, V. L. Gott, and W. A. Baumgartner, “Analysis of structure manipulation forces for teleoperation with force feedback,” MICCAI 2002, Lecture Notes in Computer Science, Vol.2488, pp. 155-162, 2002.
  7. [7] C. R. Wagner, R. D. Howe, and N. Stylopoulos, “The role of force feedback in surgery: analysis of blunt dissection,” Proc. 10th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (HAPTICS 2002), 2002.
  8. [8] K. Tadano and K. Kawashima, “Development of a Master Slave System with Force-Sensing Abilities Using Pneumatic Actuators for Laparoscopic Surgery,” Advanced Robotics, Vol.24, No.12, pp. 1763-1783, 2010.
  9. [9] K. Tadano, K. Kawashima, K. Kojima, and N. Tanaka, “Development of a pneumatic surgical manipulator ibis iv,” J. of Robotics and Mechatronics, Vol.22, No.2, pp. 179-188, 2010.
  10. [10] D. Haraguchi, T. Kanno, K. Tadano, and K. Kawashima, “A Pneumatically-Driven Surgical Manipulator with a Flexible Distal Joint Capable of Force Sensing,” IEEE/ASME Trans. on Mechatronics, Vol.20, No.6, pp. 2950-2961, 2015.
  11. [11] T. Frede et al., “The Radius Surgical System – A New Device for Complex Minimally Invasive Procedures in Urology,” Lapaproscopy, Vol.51, pp. 1015-1022, 2007.
  12. [12] T. Takayama and S. Hirose, “Development of Souryu I & II – Connected Crawler Vehicle for Inspection of Narrow and Winding Space,” J. of Robotics and Mechatronics, Vol.15, No.1, pp. 61-69, 2003.
  13. [13] J. Guna, G. Jakus, M. Pogacnik, S. Tomazic, and J. Sodnik, “An Analysis of the Precision and Reliability of the Leap Motion Sensor and Its Suitability for static and Dynamic Tracking,” Sensors, Vol.14, pp. 3702-3720, 2014.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Nov. 04, 2024