|
Caterpillar 3406, 3406B, 3406C Inframe-Overhaul Engine Rebuild Kit (Interstate McBee)
- Availability:
- OEM Number:
CAT3406MCB
- Brand:
Interstate-McBee
This item ships for free (US only, excluding AK & HI)
Please choose your customizations:
Kit Type & Piston Number: |
|
* denotes required field
Rod Bearing Sizes*
You must select an option for 'Rod Bearing Sizes'.
Main Bearing Sizes*
You must select an option for 'Main Bearing Sizes'.
$2,517.50
Price may change upon customization above.
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Fast Shipping With warehouses
across the US, we ship quickly and efficiently.
Expert Advice Expert tech advice
before and after your purchase.
High Quality Parts Our parts meet
and exceed the OEM specifications.
Details:
*Call for pricing on Off Road Equipment Overhaul Kits (Out of Frame).
Parts Included In Engine Overhaul Kit:
(6) Liner Kits (Sleeve/Liner, Piston, Rings, Wrist Pin, Liner Seals)
(1) Full Gasket Set
(6) Rod Bearings
(1) Main Bearing Set
Parts Included In Inframe Kit:
(6) Liner Kits (Sleeve/Liner, Piston, Rings, Wrist Pin, Liner Seals)
(1) Upper Gasket Set
(1) Oil Pan Gasket
(6) Rod Bearings
(1) Main Bearing Set
Cylinder blocks must be precisely checked for concentricity and deck surface condition prior to liner installation. Anything less than perfect condition at these points can lead to cracked flanges on the cylinder liner. Failure to thoroughly inspect these two areas is the leading cause of liner flange cracking and should be the foremost consideration if liner flange failure occurs. 100% of Interstate McBee liners are magnufluxed prior to shipment. CLAIMS SENT TO INTERSTATE MCBEE INVOLVING CRACKED CYLINDER LINERS WILL NOT BE CONSIDERED WITHOUT SUFFICIENT EVIDENCE AS TO CYLINDER BLOCK CONDITION.
For cylinder block deck inspection criteria and proper liner protrusion refer to the appropriate OEM service information or the OEM block joint repair procedure (SEHS9564-1). All Interstate McBee hardened liners are coated with a rust preventative during packaging. Each liner must be cleaned of this coating and then dried before placing it in the cylinder block. The liner should be cleaned with soap, warm water and a bristle brush taking extra care at the seal ring groove and filler band groove areas. Carefully dry with compressed air after cleaning is complete.
After step two (2) above is complete, the liner seal rings can be installed on the liner At this time lubricate the lower cylinder block bore and the seal rings with a rubber lubricant, liquid soap or silicone grease. Do not use any type of spray silicone. Completely coat the black filler band with clean engine oil and install in the upper band groove At this time the liner must be installed in the cylinder block as the black filler band is designed to swell upon contact.
|
|
|