We are offering wide range of Nuts (ISO, DIN and other standards) to various grades and finishes – washers from plain to special type of washers and springs.
Our offer includes
| Product description | Specification |
|---|---|
| Hexagon Full Nut, Structural nut, High Nuts, UNC Nuts | ISO 4032 DIN 934 DIN 6915 DIN 555 BS 3692 BS EN 14399-3 |
| Hexagon Jam Nut, Lock nut, Half Nut, Thin Nut, Left hand thread nuts | DIN 936 DIN 439 ISO 4035 ISO 4036 DIN 980 to drawing |
| Nylon Insert nut, Type T, Nylon Lock Nut, Press Nuts, Aerotight Nut, Binx Nut | ISO 7040 DIN 982 DIN 985 ISO 10511 |
| Castle nut | DIN 935 to drawing |
| Pal Nut | DIN 7967 |
| Hexagon Nut connector, Universal Nut Connector (UNC), Coupling Nut, Tie Rod Hexagon Nut | DIN 6334 |
| Dome nuts, cap nut, Acorn Nut, Bow Nut, Shear Nut, Eye Nut, Anti-Vandal Nut | DIN 917 DIN 1587 BS 3974 DIN 582 to drawing |
| Hexagon flange nut and lock nut, Self-Locking Nuts | DIN 6926 DIN 6923 DIN 6927 |
| Rivets nuts, Die Nuts | to drawing |
| Spherical Nut, Square nuts, Wing Nuts, Weld Nuts | to drawing DIN 557 DIN 562, DIN 313 DIN 315 DIN 929 DIN 928 |
| Plain Washers, Flat Washers, Chamfered Washers, Hard Washer | ISO 7091 ISO 7089 ISO 7090 DIN 125 BS 4320 BS EN 14399-5, -6, -9** DIN 126 DIN 433 DIN 1440 DIN 7349 DIN 7989 DIN 9616 BS 4395 |
| Dimple washer, Direct Tension Indicators Washer (DTI), Control Load Indicators Washer (CLI) | BS EN 14399-9 |
| Lock Washers, Twin Lock Washers | Nord-lock |
| Spring Washers and Disc Spring Washers, Wave spring washers, Ribbed washers | DIN 127 DIN 7980 DIN 267 DIN 43699 DIN 128 DIN 6796 DIN 2093 BS 4464 |
| Taper Washer, shoulder washer, Washer Plates, Square washers, penny washers | DIN 434 DIN 435 BS 3410 BS 4320 BS 4464 to drawing |
| Toothed washers, toothed lock washers, star washers, tab washer, serrated lock washers | EN 14545 DIN 6798 DIN 6797 DIN 93 |
| Nylon washers (polyamide), top hat washers, nylon washer plate, isolation washers, neoprene washers, hemispherical washer, red fiber washer, shakeproof washer, saddle washer | to drawing |
| Springs | to drawing |
Finishes available
| Finish | Specification |
|---|---|
| S/C Self Colour | Bare / Blackened (Black Oxide) Lightly Oiled |
| HDG Hot Dip Galvanised | EN ISO 10684 EN ISO 1461 BS 7371-6 |
| SHER / SHERA Sherardized Vapour galvanising | EN ISO 17668 EN 13811 BS 7371-8 BS 4921 |
| BZP Bright Zinc Plated | EN ISO 4042 BS 7371-3 |
| MZP / MG Mechanical Applied Coating (Galvanized/Zinc) | BS 7371-7 ASTM B695 |
| ST/ST Stainless Steel | EN ISO 3506-1 and 3506-2 |
Dome Nut Zinc
ExternalToothed Washer
Nord lock washer (Self Locking washer)
Penny Washer (Galvanised) HDG
Penny Washer (Stainless Steel) A2
EN 15048 ISO 7091 100 HV Washer
Plain Washer Form A Self Colour BS 4320
EN 14399 Part 3 Pre-load Nut (HR)
Penny Washer (Zinc Plated)
M24 HR EN 14399 Nuts Gr10 HDG
EN 14399 Plain Chamfer Washer
EN 14399 Part 3 Pre-load Nut (HR)
EN 14399 Plain Chamfer Washer (FAST H)
M24 HR EN 14399 Nuts Gr10 HDG
DIN Nuts Zinc Plated
DIN 985 TYPE T Nylon Insert Nut
Nylon Washer DIN 125A Nylon 6.6 Natural (Fire Washer)
Zinc BZP Lock Nut
HDG Lock Nut
A2 Lock Nut A4 Stainless Steel Lock Nut
DIN 6334 Hexagon Stud Connector, Coupling Nut
DIN 6334 Hexagon Stud Connector, Coupling Nut