Pro Display XDR Technical Specifications

 
 
 

Finish

Standard glass

Nano-texture glass

Display

Retina 6K display

32-inch (diagonal) IPS LCD display with oxide TFT technology

  • Resolution: 6016 by 3384 pixels (20.4 million pixels) at 218 pixels per inch
  • Aspect ratio: 16:9

XDR (Extreme Dynamic Range)

  • Viewing angle: Superwide angle with high-fidelity colour and contrast at 89º left, 89º right, 89º up, 89º down
    Fully laminated; 1.65% reflectivity (typical)

Superwide
viewing angle

  • Contrast ratio: 1,000,000:1
  • Colour: P3 wide colour gamut, 10-bit depth for 1.073 billion colours
  • XDR brightness: 1,000 nits sustained full-screen, 1,600 nits peak1 (HDR content only)
  • SDR brightness: 500 nits

Technology

  • 2D backlighting system using 576 full-array local dimming zones
  • Apple-designed timing controller (TCON) chip engineered to precisely control high-speed modulation of both 20.4 million LCD pixels and 576 LEDs in backlight for seamless synchronisation
  • True Tone technology with a dual ambient light sensor (ALS) design to ensure an accurate viewing experience in any ambient lighting condition

Refresh Rates

  • 47.95Hz
  • 48.00Hz
  • 50.00Hz
  • 59.94Hz
  • 60.00Hz

Reference Modes

Available reference modes:

  • Pro Display XDR (P3-1,600 nits)
  • Apple Display (P3-500 nits)
  • HDR Video (P3-ST 2084)
  • HDTV Video (BT.709-BT.1886)
  • NTSC Video (BT.601 SMPTE-C)
  • PAL and SECAM Video (BT.601 EBU)
  • Digital Cinema (P3-DCI)
  • Digital Cinema (P3-D65)
  • Design and Print (P3-D50)
  • Photography (P3-D65)
  • Internet and Web (sRGB)

Software Features

The following features require macOS Catalina 10.15.2 or later:

  • Reference mode selection
  • Custom reference modes
  • Reference status indicator
  • Brightness control
  • Portrait/landscape detection
  • Night Shift
  • True Tone
  • Dolby Vision, HDR10 and Hybrid-Log Gamma (HLG) playback support
  • User calibration

Size and Weight

71.8 cm
28.3 inches

41.2 cm
16.2 inches

2.7 cm
1.1 inches

  • Width: 71.8 cm (28.3 inches)
  • Height: 41.2 cm (16.2 inches)
  • Depth: 2.7 cm (1.1 inches)
  • Weight: 7.48 kg (16.49 pounds)2

Pro Stand

Height of display with stand,
landscape, top position

65.3 cm
25.7 inches

Height of display with stand,
landscape, bottom position

53.3 cm
21.0 inches

Height of display with stand,
portrait, top position

80.6 cm
31.7 inches

Depth of display
with stand

23.6 cm
9.3 inches

Width
of stand

18.0 cm
7.1 inches

  • Height adjustment: The system allows for a total height adjustment of 120 mm (60 mm in each direction from the midpoint)
  • Orientation: Landscape or portrait
  • Tilt: –5° to +25°

Display with stand size and weight

  • Depth (tilt 25°): 27.8 cm (10.9 inches)
  • Weight: 11.78 kg (25.99 pounds)2
  • Landscape orientation
  • Width: 71.8 cm (28.3 inches)
  • Height in top position: 65.3 cm (25.7 inches)
  • Height in bottom position: 53.3 cm (21.0 inches)
  • Portrait orientation
  • Width: 41.2 cm (16.2 inches)
  • Height in top position: 80.6 cm (31.7 inches)

Stand size and weight

  • Width: 18.0 cm (7.1 inches)
  • Height (arm 0º, tilt 0º): 43.3 cm (17.0 inches)
  • Depth: 23.6 cm (9.3 inches)
  • Height (arm 45º, tilt 25º): 49.7 cm (19.6 inches)
  • Weight: 4.3 kg (9.5 pounds)2

Attach and detach

Effortlessly attaches and detaches for quick and easy transportation. The puck-shaped magnetic connector is designed to attach to the back of the display and locks Pro Stand and the display together. To detach, simply unlock the slider and tilt the display far back to release the magnets, then lift the display off Pro Stand.

VESA Mount Adapter

11.9 cm
4.7 inches

Size and weight

  • Width: 11.9 cm (4.7 inches)
  • Height: 11.9 cm (4.7 inches)
  • Depth: 1.83 cm (0.72 inch)
  • Weight: 0.28 kg (0.62 pound)2

Attach

An easy-to-attach alternative to Pro Stand. With a similar design to the magnetic connector on Pro Stand, it can be placed and secured quickly and easily using the included Apple-designed tool.

Compatible with a 100-by-100-mm VESA stand or mount.

Connections

Power

Thunderbolt 3 (USB-C) port

USB-C ports

One Thunderbolt 3 (USB-C) port, three USB-C ports

  • One upstream port for Mac Pro or other Thunderbolt 3 host (96W host charging)
  • Three USB-C (USB 2) ports for charging or syncing3

Learn more about Thunderbolt 3

Learn more about SDI connectivity

Compatibility

Pro Display XDR is compatible with the following Mac models running macOS Catalina 10.15.2 or later:

  • Mac Pro (2023)
  • Mac Pro (2019) with MPX Module GPUs
  • Mac Studio (2022 or later)
  • Mac mini (2018 or later)
  • 16-inch MacBook Pro (2019 or later)
  • 14-inch MacBook Pro (2021 or later)
  • 15-inch MacBook Pro (2018 or later)
  • 13-inch MacBook Pro (2016 or later)
  • MacBook Air (2020 or later)
  • 27-inch iMac (2019 or later)
  • 24-inch iMac (2021 or later)
  • 21.5-inch iMac (2019)
  • iMac Pro (2017)
  • Any Mac model with Thunderbolt 3 ports paired with Blackmagic eGPU or Blackmagic eGPU Pro

In the Box

  • Pro Display XDR
  • Power cord (2 m)
  • Apple Thunderbolt 3 Pro Cable (2 m)
  • Polishing cloth

Electrical and Operating Requirements

  • Line voltage: 100–240V AC
  • Frequency: 50Hz to 60Hz, single phase
  • Operating temperature: 10° to 35° C (50° to 95° F)
  • Relative humidity: 5% to 95% noncondensing
  • Maximum altitude: Tested up to 5,000 metres (16,400 feet)

Limited Warranty and Service

Products that you purchase in New Zealand are covered by New Zealand consumer law. For more details, click here.

Your Pro Display XDR also comes with 90 days of complimentary technical support and a one-year limited warranty from Apple. To learn more about how Apple will service your Pro Display XDR, click here.

Purchase AppleCare+ for Apple Display to get up to three years of expert technical support and coverage for unlimited repairs for accidental damage from handling, each subject to a service fee of NZ$169 for screen damage or external enclosure damage, or NZ$499 for other accidental damage. Coverage begins on your AppleCare+ purchase date. For more information, click here.

Pro Display XDR and the Environment

Apple takes a complete product life cycle approach to determining our environmental impact. Learn more

Pro Display XDR is designed with the following features to reduce its environmental impact:

Made with better materials

  • Enclosure made with low‑carbon aluminium

Energy-efficient

  • Meets ENERGY STAR® requirements4

Responsible packaging

  • Recyclable, majority-fibre packaging
  • 100 per cent of primary wood fibre comes from responsibly managed forests

Smarter chemistry

  • Arsenic-free display glass
  • Mercury-free LED-backlit display
  • BFR-, PVC- and beryllium-free

Recycling

Apple takes a holistic view of materials management and waste minimisation. Learn more about how to recycle your Apple products.

Learn more

Read the Pro Display XDR Environmental Report (PDF) for detailed information on its environmental performance.