What are the temps like on the h510? : r/NZXT - Reddit
Oct 2, 2020 · The H510 is designed for negative pressure so be prepared for the GPU to suck air in through the back of the case thus maybe attracting a bit more dust but surprisingly enough the front intakes with filters haven't been hit by much dust after almost two months of every day use.
Is the NZXT H510's airflow really THAT bad? : r/buildapc - Reddit
Aug 14, 2021 · The gpu is 340mm, stated the case can hold a 380mm while the H510 was good now the new gpu cuts off the negative airflow in the case. The issue then creates an air pocket of hot air being exhausted by the gpu while not being able to move and than being re inhaler by the gpu so my gpu was hitting 98c to 100c and junctions were 110-115%.
Is the NZXT H510 a good case? : r/buildapc - Reddit
Ill add that the difference between H500 and H510 is that the H510 has a usb c port on the front (and a 2-in-1 audio jack) while the H500 has 2 usb 2.0 (i think its 2.0)(has two separate audio jacks). Its a good case tho, its really nice, comes with two fans aswell. But very true a lot of people will have this case aswell.
Vertical mounting of GPU in the H510 Elite : r/NZXT - Reddit
Aug 15, 2021 · Posted by u/No-not-Lentils - 6 votes and 4 comments
NZXT H510 ELITE build : r/NZXT - Reddit
Jun 2, 2020 · This is the H510 elite with the included AER 140's in the front and 2 corsair ll rgb 120's in the rear and rear top slots. R5 3600 and 2 GTX 980. R5 3600 and 2 GTX 980. GPU's have never gone over 79c even running folding clients at full tilt. cpu will push to 70 under load.
r/NZXT on Reddit: The H510 is a thermally confusing case - my …
Mar 6, 2022 · So, in any sort of conclusion, the NZXT H510 series of cases perform very strangely when it comes to full length GPUs. Large cards seem to require lots of space to perform well thermally, and in this case, blasting air even directly towards the GPU appears to starve larger cards of air by creating some sort of air pocket in front of the card.
NZXT H510 and RTX 3070 : r/buildapc - Reddit
Nov 24, 2020 · I'm building my first PC with an X570-P, a Ryzen 7 3700X, and (hopefully soon) an RTX 3070. The cooler I want to use is an ARCTIC Freezer 34 eSports DUO. The thing is I really like the NZXT H510 case, this model specifically:
Best way to get replacement side panel for H510? : r/NZXT - Reddit
Oct 4, 2021 · Hey guys got room for another side panel disaster? As it cracked i hear the glass say “gotcha”! Anyway Im ordering from etsy as i ordered the front panel and replaced the glass on the front for better airflow. Plenty of other pc case manufacturers use thicker more durable panes, NZXT… not so much..
4090 in the NZXT H510 : r/nvidia - Reddit
Thank you! I used the NZXT Underglow. The two bars at the top and bottom of the inside of the case are the underglows. Not a big fan of RGB but I did want to highlight the components inside. NZXT has their CAM software that lets you change the color but I think white looks the best :).
H510 Flow Build Complete! : r/NZXT - Reddit
For NZXT AIO's the pump / air issue isnt a problem if positioned with the tubing into the rad at a higher point than the AIO cold plate. There is a JayzTwoCentz video that I'd recommend here link So for my build I have an "acceptable" approach - better would be tubes going to bottom (flipping the rad) or top mounting.