Okonite's multiconductor PILC cables are available with three different style conductors depending on the application. The three conductor styles are compressed round, compact round and compact (120°) sector.
CBi Electric African Cables PO Box 172, Vereeniging 1930 • Tel: +27 16 430 6000 • Fax: +27 16 423 6103 www.cbi-electric.com [email protected] Medium Voltage PILC Cables • afca Copper 3 Core PILC/PILAC F1FC… Primary group code 6350/11000V FRPVC SWA FRPVC (red stripe) …19111 Table + Finish code Table 19
When jointing two different cable types, for example XLPE to PILC refer to the stripping dimensions for the straight joints and prepare them accordingly. Core separators
Straight and Branch Joints may be used on uncut cables by utilising appropriate connectors and following connector manufacturers instructions for re-insulation.
These instructions are relevant for CTL’s S185 (or CM6-07LSHF) & S300 (or CM6-08LSHF) Low Voltage cable joints. Instructions assume that cables are de-energised. Instructions are for guidance only, and subject to standard jointing procedures, which should always be followed.
CBi Electric African Cables • Tel: +27 16 430 6000 Fax: +27 16 423 6103 www.cbi-electric.com [email protected] Medium Voltage PILC Cables • afca Copper 3 Core PILC/PILAC F1EC… Primary group code 6600/6600V FRPVC SWA FRPVC (red stripe) …24111 Table + Finish code Table 24 LHPVC SWA LHPVC (blue stripe) …24212 SANS 97
Okonite's multiconductor PILC cables are available with three different style conductors depending on the application. The three conductor styles are com-pressed round, compact round and compact (120 ) sector.
CBi Electric African Cables PO Box 172, Vereeniging 1930 • Tel: +27 16 430 6000 • Fax: +27 16 423 6103 www.cbi-electric.com [email protected] Medium Voltage PILC Cables • afca Aluminium 3 Core PILC/PILAC F1FA… Primary group code 6350/11000V FRPVC SWA FRPVC (red stripe) …17111 Table + Finish code Table 17 LHPVC SWA LHPVC (blue stripe ...
LV Resin Cable Joints 4 Core XLPE & PILC SWA, 185sqmm …
This document provides instructions for joining low voltage cable types PVC (XLPE)/SWA/PVC, PILC/SWA, S185 (CM6-07LSHF), and S300 (CM6-08LSHF). It lists important safety notes and provides details on stripping dimensions, joining the cables, applying armour continuity, and completing the joint.
This jointing instruction applies to jointing of a 3-core Steel Wire Armoured cable to an existing 2-core PILCSTA single phase service cables in the range of 0.06in2 to 0.0225in2. This joint is required if the SWA cable is used to provide a service alteration such as unlooping as described in CP226 , Section 6.5.