13Jan2022
7 Professional Tips On Cleaning Walls And Ceilings
Painting the walls and ceilings in your home frequently is costly and cumbersome. You can paint them once a year to maintain their appearance and structural integrity, but you must clean them every few weeks for keeping these surfaces spotless and sanitary at all times.
Without regular cleaning, walls and ceilings gather dust, cobwebs and mould spots, especially those in high traffic areas. During rental inspection, dirty walls and ceilings make you lose the bond money completely. Therefore, most people hire professional services for bond cleaning in Sydney to get a 100% bond back guarantee.
You can avail of a professional cleaning service when ending a tenancy, but follow these seven professional tips on cleaning walls and ceilings for regular sanitation.
In a basket with a handle, gather all the cleaning products and tools you need for wiping, scrubbing and washing. You can carry this kit from one room to another with the vacuum cleaner without hassle or stress. Here are the things your kit should have before you start cleaning.
A mild soap
Warm water
Microfiber duster, cloth and towels
A soft sponge
Spray bottles, plastic mugs and bowls for keeping cleaning pastes or solutions
Baking soda and white vinegar
Hydrogen peroxide and create or tartar (if you have tiled walls)
Whether dusting, spot-cleaning or washing, these surfaces always move top to bottom. It is a professional technique experienced end of lease cleaners in Sydney use to save time and energy while sanitising flat and vertical areas.
The debris, dust, water and cleaner move downward when you clean top to bottom, preventing sanitised areas from getting dirty or having streaks.
Additionally, this technique helps save product and water because you can use these resources as per requirement and not repeatedly clean the same spots.
Use a vacuum cleaner with the flat-brush head and nozzle to get rid of cobwebs, dust particles and other physical pollutants on the ceilings and walls. You can also sanitise the areas with a microfiber duster with a bendable body and a telescopic handle to reach hard to clean points.
Dusting/vacuuming make an instant impact and make the walls/ceilings look neater than before. These activities help keep the surfaces sanitary and prevent the accumulation of difficult build-up.
Mould spots are common on walls & ceilings in the bathroom, kitchen, basement and other rooms where dampness persists. They start as small specks and develop quickly in poorly ventilated areas or when you don’t remove them in the initial stage.
White vinegar is a potent cleaning agent that can kill the mould naturally. All you need to do is spray it directly on the spots and leave for 30-45 minutes. Afterwards, scrub gently with a sponge damp with soap and clean the residues with microfiber cloths. Reapply vinegar and let it air dry to prevent future growth of mould.
Avoid moving the cloths, sponges or wipes in circular motions while cleaning walls or ceilings. It spreads dust, grime and germs rather and it is an ineffective cleaning technique you shouldn’t use.
You can wipe to remove cleaner and residues from walls and ceilings, making an ‘S’ pattern to collect the moisture or dust without contaminating clean areas again. Using this technique, you will also save time and energy as it prevents the formation of streaks and easier to cover more area while wiping.
While deep cleaning walls or ceilings, make sure they are bare, as you can dirty the curtains, paintings and other things on the walls. These items can slow the process of sanitation and cause stress.
When you hire professional end of lease cleaners in Sydney to deep clean your rental property, you must ensure the house or unit is empty upon their arrival. Thus, it is not a problem to ensure the walls are bare. However, during routine house cleaning, you should take off the things on the walls and store them safely until you can put them back.
Walls get scuff marks, spots and streaks that you can remove with baking soda, a damp sponge and a microfiber cloth. Apply the powder on the sponge and scrub the areas with the spots to get rid of them naturally and without damaging the surfaces. Baking soda is mildly abrasive and non-toxic, making it a great cleaning agent for households.
Wall and ceiling cleaning is often neglected during regular house sanitation, but your house appears extremely unkempt if you ignore it for months.
Dirty walls and ceilings, among other household areas, will make you lose the bond money. Therefore, hire professional end of lease cleaners in Sydney to manage the task and let you move out without hassle. But, for keeping these surfaces neat and spotless all year round, follow the professional tips on cleaning walls and ceilings.
Without regular cleaning, walls and ceilings gather dust, cobwebs and mould spots, especially those in high traffic areas. During rental inspection, dirty walls and ceilings make you lose the bond money completely. Therefore, most people hire professional services for bond cleaning in Sydney to get a 100% bond back guarantee.
You can avail of a professional cleaning service when ending a tenancy, but follow these seven professional tips on cleaning walls and ceilings for regular sanitation.
1. Create A Cleaning Kit
In a basket with a handle, gather all the cleaning products and tools you need for wiping, scrubbing and washing. You can carry this kit from one room to another with the vacuum cleaner without hassle or stress. Here are the things your kit should have before you start cleaning.
2. Move Top To Bottom
Whether dusting, spot-cleaning or washing, these surfaces always move top to bottom. It is a professional technique experienced end of lease cleaners in Sydney use to save time and energy while sanitising flat and vertical areas.
The debris, dust, water and cleaner move downward when you clean top to bottom, preventing sanitised areas from getting dirty or having streaks.
Additionally, this technique helps save product and water because you can use these resources as per requirement and not repeatedly clean the same spots.
3. Always Vacuum & Dust First
Use a vacuum cleaner with the flat-brush head and nozzle to get rid of cobwebs, dust particles and other physical pollutants on the ceilings and walls. You can also sanitise the areas with a microfiber duster with a bendable body and a telescopic handle to reach hard to clean points.
Dusting/vacuuming make an instant impact and make the walls/ceilings look neater than before. These activities help keep the surfaces sanitary and prevent the accumulation of difficult build-up.
4. Remove Mould Spots With White Vinegar
Mould spots are common on walls & ceilings in the bathroom, kitchen, basement and other rooms where dampness persists. They start as small specks and develop quickly in poorly ventilated areas or when you don’t remove them in the initial stage.
White vinegar is a potent cleaning agent that can kill the mould naturally. All you need to do is spray it directly on the spots and leave for 30-45 minutes. Afterwards, scrub gently with a sponge damp with soap and clean the residues with microfiber cloths. Reapply vinegar and let it air dry to prevent future growth of mould.
5. Wipe in ‘S’ Pattern
Avoid moving the cloths, sponges or wipes in circular motions while cleaning walls or ceilings. It spreads dust, grime and germs rather and it is an ineffective cleaning technique you shouldn’t use.
You can wipe to remove cleaner and residues from walls and ceilings, making an ‘S’ pattern to collect the moisture or dust without contaminating clean areas again. Using this technique, you will also save time and energy as it prevents the formation of streaks and easier to cover more area while wiping.
6. Remove Curtains, Paintings, Hangings Etc. Before Cleaning
While deep cleaning walls or ceilings, make sure they are bare, as you can dirty the curtains, paintings and other things on the walls. These items can slow the process of sanitation and cause stress.
When you hire professional end of lease cleaners in Sydney to deep clean your rental property, you must ensure the house or unit is empty upon their arrival. Thus, it is not a problem to ensure the walls are bare. However, during routine house cleaning, you should take off the things on the walls and store them safely until you can put them back.
7. Spot Clean With Baking Soda
Walls get scuff marks, spots and streaks that you can remove with baking soda, a damp sponge and a microfiber cloth. Apply the powder on the sponge and scrub the areas with the spots to get rid of them naturally and without damaging the surfaces. Baking soda is mildly abrasive and non-toxic, making it a great cleaning agent for households.
The Bottom Line
Wall and ceiling cleaning is often neglected during regular house sanitation, but your house appears extremely unkempt if you ignore it for months.
Dirty walls and ceilings, among other household areas, will make you lose the bond money. Therefore, hire professional end of lease cleaners in Sydney to manage the task and let you move out without hassle. But, for keeping these surfaces neat and spotless all year round, follow the professional tips on cleaning walls and ceilings.
