3 Locking Gun Rack for Vertical Floor/Wall Mount - for Home Closets - Gun Storage Rack to Display Rifles/Shotguns in Stores and Gun Cabinets

Description

This secure gun rack is for Floor and Wall mounting. It organizes loosely stored guns limiting personable liability and deters gun theft. Must use Floor, Strong Shelf or Countertop as a base for gun stocks to keep guns in rack. It will hold most all STANDARD type rifles and shotguns with STANDARD scopes and SIMILAR LENGTH WOOD stocks (types shown in photos) including AR15s with A2 stocks. Risers (not included) can be placed under the gun's stocks for guns with shorter stocks. For some guns it may be necessary to mount the rack further away from the wall with a 2 x 4 inch board mounted between the rack and wall. Gun sleeves and trigger locks can also be added to each firearm. All carbon steel parts are welded together to provide supreme security. Requires only 14 inches of wall space for mounting. This wall mount gun rack mounts approximately 12 inches above the floor, a strong shelf or counter top. It securely fastens to a single wall framing stud with two 3/8 x 2.5 inch hex head screws. If no wall stud is available at the desired mounting place, a 2 x 4 inch board can be securely attached horizontal to the wall for mounting. When the firearms are locked into their individual stalls, in front of the two hidden hex head mounting screws, it deters unauthorized removal of each screw. Two round screw head guards (included) can also be tapped and super glued over the screw heads for extra security from removal.. The 5/8 inch diameter steel locking bar locks each firearm in their individual stalls by passing through the stock's narrowest section (normally under the trigger guard) which keeps them from being pulled out of the rack. It can also be mounted inside a gun display cabinet having a minimum interior dimension of 14 inches (L) and 12 inches (D). Measurements: Lower Section (with locking bar in place) : 10.5 inches (L) x 8 inches (W) x 2 inches (H); Individual stalls: 2.25 inches (W) x 3 inches (D); Weight: 6 pounds; (Padlock Not Included).