SIM800C Development Board Quad-band GSM GPRS Bluetooth Module

SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w/Antenna inm

SKU:012450

$11.99

Product Features:
1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current The smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;
2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;
3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. Do not need to convert directly connected;
4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;
5. Support TTS \ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;
6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;
7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;
8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas

Product pin description:
GND: Power ground
VCC_IN: Power supply pin, input DC5V-20V, for powering the board
RI: Kernel Ringing Tip pin
DTR: Data terminal preparation
TXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)
RXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)
U2_R: module serial port 2 receive pin
U2_T: module serial port 2 send pin
V_M: then the target controller board microcontroller voltage 5V / 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic
ADC: ADC detection
SPP: core audio output pin
SPN: Core audio output pin
MC-: core audio input pin
MC +: core audio input pin
PWR: Pull this pin to enable the module to turn on or off
BAT: lithium battery input pin, 3.3v-4.4v

Package included:

1x SIM800C Development Board

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancy86-0755-85201155

Package included:

1x SIM800C Development Board

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.

Picking up at the store

Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.

Delivery

Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

18650 Battery Shield V8 Mobile Power Bank 3V/5V for Arduino ESP32 ESP8266

Translation missing: en.products.product.regular_price $5.99
{"id":2199590830138,"title":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","handle":"sim800c-development-board-quad-band-gsm-gprs-bluetooth-module-w-antenna-inm","description":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-30T16:51:43+08:00","created_at":"2018-11-30T16:53:27+08:00","vendor":"diymore","type":"GPS\/GPRS Module","tags":["1865","18650"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22066986942522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012450","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","public_title":null,"options":["Default Title"],"price":1199,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","options":["Title"],"media":[{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940680263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940745799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678941040711,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V/5V

Translation missing: en.products.product.regular_price $9.99
{"id":2199590830138,"title":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","handle":"sim800c-development-board-quad-band-gsm-gprs-bluetooth-module-w-antenna-inm","description":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-30T16:51:43+08:00","created_at":"2018-11-30T16:53:27+08:00","vendor":"diymore","type":"GPS\/GPRS Module","tags":["1865","18650"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22066986942522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012450","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","public_title":null,"options":["Default Title"],"price":1199,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","options":["Title"],"media":[{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940680263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940745799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678941040711,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Micro USB Wemos ESP32 18650 Battery Shield V3 ESP-32 for Arduino Raspberry Pi

Translation missing: en.products.product.regular_price $7.99
{"id":2199590830138,"title":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","handle":"sim800c-development-board-quad-band-gsm-gprs-bluetooth-module-w-antenna-inm","description":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-30T16:51:43+08:00","created_at":"2018-11-30T16:53:27+08:00","vendor":"diymore","type":"GPS\/GPRS Module","tags":["1865","18650"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22066986942522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012450","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","public_title":null,"options":["Default Title"],"price":1199,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","options":["Title"],"media":[{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940680263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940745799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678941040711,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
UNO R3 ATmega328P CH340G Replace ATmega16U2 Mini USB Board for Arduino DIY

Translation missing: en.products.product.regular_price $7.99
{"id":2199590830138,"title":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","handle":"sim800c-development-board-quad-band-gsm-gprs-bluetooth-module-w-antenna-inm","description":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-30T16:51:43+08:00","created_at":"2018-11-30T16:53:27+08:00","vendor":"diymore","type":"GPS\/GPRS Module","tags":["1865","18650"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22066986942522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012450","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","public_title":null,"options":["Default Title"],"price":1199,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","options":["Title"],"media":[{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940680263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940745799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678941040711,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
BEETLE BadUSB Micro ATMEGA32U4-AU Development Expansion Module Board For Arduino Leonardo R3 5V I2C

Translation missing: en.products.product.regular_price $47.99
{"id":2199590830138,"title":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","handle":"sim800c-development-board-quad-band-gsm-gprs-bluetooth-module-w-antenna-inm","description":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-30T16:51:43+08:00","created_at":"2018-11-30T16:53:27+08:00","vendor":"diymore","type":"GPS\/GPRS Module","tags":["1865","18650"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22066986942522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012450","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","public_title":null,"options":["Default Title"],"price":1199,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","options":["Title"],"media":[{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940680263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940745799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678941040711,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
STM32F4 Discovery STM32F407VGT6 Microcontroller 32bit Flash MCU ARM Cortex M4 Core Development Board

Translation missing: en.products.product.regular_price $69.99
{"id":2199590830138,"title":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","handle":"sim800c-development-board-quad-band-gsm-gprs-bluetooth-module-w-antenna-inm","description":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-30T16:51:43+08:00","created_at":"2018-11-30T16:53:27+08:00","vendor":"diymore","type":"GPS\/GPRS Module","tags":["1865","18650"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22066986942522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012450","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"SIM800C Development Board Quad-band GSM GPRS Bluetooth Module w\/Antenna inm","public_title":null,"options":["Default Title"],"price":1199,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","options":["Title"],"media":[{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940680263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_86acd747-e4ad-4ec9-99e3-9b2cc0553423_791.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678940745799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_3_626.jpg?v=1588658971","width":1000},{"alt":"Sim800C Development Board Quad-Band Gsm Gprs Bluetooth Module W\/antenna Inm Gps\/gprs","id":6678941040711,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012450_4_613.jpg?v=1588658971","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan id=\"result_box\" style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\" lang=\"en\"\u003e\u003cspan title=\"产品特性：\n\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"1.输入电压范围5V-20V DC，供电范围大适用于各种供电场合，学生和工程项目中使用更方便，GPRS模块通信时峰值电流很大，电压低，因此开发板电源电压越高，电流\"\u003e1. Input voltage range of 5V-20V DC, power supply range for a variety of power supply occasions, students and projects to use more convenient, GPRS module communication peak current is very large, low voltage, so the higher development board power supply voltage, current \u003c\/span\u003e\u003cspan title=\"越小，电源压力就越小，在集成gprs模块到产品中时，需要考虑开发板的电源电路，尽可能使得电源线1mm以上宽度，越短越好；\n\"\u003eThe smaller the power supply pressure, the smaller the integration of the gprs module into the product, the power board of the development board needs to be taken into account, making the power line more than 1mm wide, as short as possible;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"2模块接上电源自动开机连接网络，不需要按键控制开机，上电直接启动，省去了麻烦的开机过程，预留开机引脚，可以实现用户自己控制开关机；\n\"\u003e2 module connected to the power automatically connected to the network connection, no need to control the boot button, power on the direct start, eliminating the need for a boot process, set the boot pin, you can control the user to control the machine;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"3.模块TTL带电平转换电路，兼容各种单片机串口。\"\u003e3. Module TTL with level conversion circuit, compatible with a variety of single-chip serial port. \u003c\/span\u003e\u003cspan title=\"不需要转换直接连接；\n\"\u003eDo not need to convert directly connected;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"4.音频接口排针方式引出，方便测试，预留耳机和麦克风接口；\n\"\u003e4. Audio interface pin out the way to facilitate the test, set aside headset and microphone interface;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"5.支持TTS\\DTMF功能，可以将文本直接通过语言播报和通话时识别对方按键，实现和10086语音台功能；\n\"\u003e5. Support TTS \\ DTMF function, you can text directly through the language broadcast and call to identify each other keys, to achieve and 10086 voice function;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"6.蓝牙功能，蓝牙3.0协议，增强版蓝牙天线信号超强，支持串口SPP和音频服务等；\n\"\u003e6. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial port SPP and audio services;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"7.预留锂电池供电BAT接口，可以使用锂电池供电，方便工程开发， 3.7V锂电池或者18650锂电池；\n\"\u003e7. Reserved lithium battery-powered BAT interface, you can use lithium battery-powered, easy engineering development, 3.7V lithium battery or 18650 lithium battery;\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"8.预留IPEX接口，SMA接口，弹簧天线接口，可针对不同场合使用不同天线\n\n\"\u003e8. Reserved IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"产品引脚介绍：\n\"\u003e\u003cstrong\u003eProduct pin description:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"GND：电源地线\n\"\u003eGND: Power ground\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"VCC_IN：供电引脚，输入DC5V-20V，用于给板子供电\n\"\u003eVCC_IN: Power supply pin, input DC5V-20V, for powering the board\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RI：内核振铃提示引脚\n\"\u003eRI: Kernel Ringing Tip pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"DTR：数据终端准备\n\"\u003eDTR: Data terminal preparation\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"TXD：模块串口发送引脚，TTL电平（不能直接接RS232电平）\n\"\u003eTXD: module serial port to send pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"RXD：模块串口接收引脚，TTL电平（不能直接接RS232电平）\n\"\u003eRXD: module serial port receive pin, TTL level (can not be directly connected to RS232 level)\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_R：模块串口2接收引脚\n\"\u003eU2_R: module serial port 2 receive pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"U2_T：模块串口2发送引脚\n\"\u003eU2_T: module serial port 2 send pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"V_M：接目标控制板单片机内核电压的5V\/3.3V(根据自身单片机是多少v内核来区分)，该引脚用于转换GSM模块板子的TXD和RXD为相对应的TTL逻辑\n\"\u003eV_M: then the target controller board microcontroller voltage 5V \/ 3.3V (according to their own microcontroller is how many v kernel to distinguish), the pin is used to convert the GSM module board TXD and RXD for the corresponding TTL logic\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"ADC：ADC检测\n\"\u003eADC: ADC detection\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPP：内核音频输出引脚\n\"\u003eSPP: core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"SPN：内核音频输出引脚\n\"\u003eSPN: Core audio output pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC-：内核音频输入引脚 \n\"\u003eMC-: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"MC+：内核音频输入引脚\n\"\u003eMC +: core audio input pin\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"PWR：拉低该引脚可以实现模块的开启或者关闭\n\"\u003ePWR: Pull this pin to enable the module to turn on or off\u003cbr\u003e\u003c\/span\u003e\u003cspan title=\"BAT：锂电池输入引脚，3.3v-4.4v\"\u003eBAT: lithium battery input pin, 3.3v-4.4v\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: 16px;\"\u003e1x SIM800C Development Board\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}