The Pioneer DJM-600 was the follow up of the DJM-500, but as there was still demand for the DJM-500 it was not discontinued when the DJM600 launched.

Successor : Pioneer DJM-800
Predecessor : Pioneer DJM-500

In Silver Titanium : Pioneer DJM-600-S

At launch in the USA the DJM-600 was only available in Silver/Titanium and in Europe it was only available in Black, both colors have identical features. Later both colors would be available across the world.

Also see the : Ultimate DJM Comparison Chart. An overview of all the current Pioneer DJM models with their features cleary stated.

Features

4+1 Channel Mixer
Per Channel : PFL Cue, 3 Band EQ, Trim, Faderstart
Microphone with 3 Band EQ, Trim and Talk Over
Beat Sampler with Stretch Play to match tempo of the track
BPM Counter Display
9 Beat FX, beat synced : Auto BPM, Delay, Echo, Pan, Trans, Filter, Flanger, Reverb, Pitch Shifter
Beat FX can now also be applied on the Crossfader
Send/Return assignable to each Channel, Crossfader, Mic or Master
Beat FX Time control, Beat skip buttons and variable control, LED lights up at synced times (¼, ½, 1, 2 etc) below BPM counter
Crossfader, each channel assignable, can be disabled
PFL Mono Split
PFL Mono/Stereo Switch
VU Meter with Peak Hold (2 sec)
Master Volume Fader
Master Balance control
Master Mono/Stereo Switch
Master Attenuator control on back
Booth Monitor Output
Record Output

Specifications

Inputs : 3 Phono(RCA), 5 Line(RCA), 2 Mic(XLR, Jack)
Outputs : Master (XLR, RCA), Record(RCA), Booth(RCA), Headphones(Jack)
Master XLR : Pin 3 Hot, Pin 2 Cold !!
Connections : Send/Return(Jack), Faderstart(Mini Jack)
EQ Low : -26 +12dB @70Hz
EQ Mid : -26 +12dB @ 1kHz
EQ High : -26 +12dB @13kHz
Mic EQ Low : -20 +12dB @ 100Hz
Mic EQ Mid : -20 +12dB @ 1kHz
Mic EQ High : -20 +12dB @ 10kHz

Frequency Response : 20Hz - 20kHz
Signal to Noise : 87dB
Distortion(THD) : 0.02%
Crosstalk : 70dB
Power Supply : 220-240VAC @50/60Hz
Power Consumption : 34W
Dimensions (WxDxH) : 320 x 372 x 107mm
Weight : 6.6kg