Objective

Because of their anatomic configuration, middle cerebral artery (MCA) aneurysms are most often treated with surgical clipping. However, endovascular coil embolization of these aneurysms is an increasingly used alternative. We retrospectively reviewed the anatomic and clinical outcomes of patients with MCA aneurysms who underwent endovascular treatment at our institution.

Methods

One hundred fifteen MCA aneurysms in 115 patients (mean age, 55.1 years) were treated by an endovascular technique from April 1990 to March 2007. Forty-eight patients (42%) presented with acute subarachnoid hemorrhage, and 67 patients (58%) had unruptured aneurysms. Fifty-three aneurysms (46%) were small with a small neck, 28 (24%) were small with a wide neck, 22 (19%) were large, and 12 (11%) were giant.

Results

Angiographic results immediately after embolization showed complete occlusion in 53 aneurysms (46%), a neck remnant in 51 (44%), and incomplete occlusion in 3 (3%). Because of anatomic difficulties, we could not embolize 8 aneurysms (7%). Thirteen patients underwent combined treatment that included endovascular and extracranial-intracranial bypass surgery. Morbidity and mortality rates were 6.9% (8 patients) and 3% (3 patients), respectively. Procedure-related complications were encountered in 10 patients (9%). Seventy patients had long-term follow- up angiograms. Seven aneurysms (10%) were recanalized; all were large or giant. One partially embolized large aneurysm ruptured 13 months after embolization.

Conclusion

In this series, endovascular coil embolization of MCA aneurysms has morbidity and mortality rates comparable to those of conventional surgical clipping. Combined treatment of endovascular and bypass surgery can successfully treat large or giant complex fusiform MCA aneurysms.

BACKGROUND:Hemodynamic factors play important roles in aneurysm recurrence after endovascular treatment. OBJECTIVE:Predicting the risk of recurrence by hemodynamic analysis using an untreated aneurysm model is important because such prediction is required before treatment. METHODS:We retrospectively analyzed hemodynamic factors associated with aneurysm recurrence from pretreatment models of five recurrent and five stable posterior communicating artery (Pcom) aneurysms with no significant differences in aneurysm volume, coil packing density, or sizes of the dome, neck, or Pcom. Hemodynamic factors of velocity ratio, flow rate, pressure ratio, and wall shear stress were investigated. RESULTS:Among the hemodynamic factors investigated, velocity ratio and flow rate of the Pcom showed significant differences between the recurrence group and stable group (0.630 ± 0.062 and 0.926 ± 0.051, P= 0.016; 56.4 ± 8.9 and 121.6 ± 6.7, P= 0.008, respectively). CONCLUSIONS:Our results suggest that hemodynamic factors may be associated with aneurysm recurrence among Pcom aneurysms. Velocity and flow rate in the Pcom may be a pretreatment prognostic factor for aneurysm recurrence after endovascular treatment.

BACKGROUND: Hemodynamic factors play important roles in aneurysm recurrence after endovascular treatment. OBJECTIVE: Predicting the risk of recurrence by hemodynamic analysis using an untreated aneurysm model is important because such prediction is required before treatment. METHODS: We retrospectively analyzed hemodynamic factors associated with aneurysm recurrence from pretreatment models of five recurrent and five stable posterior communicating artery (Pcom) aneurysms with no significant differences in aneurysm volume, coil packing density, or sizes of the dome, neck, or Pcom. Hemodynamic factors of velocity ratio, flow rate, pressure ratio, and wall shear stress were investigated. RESULTS: Among the hemodynamic factors investigated, velocity ratio and flow rate of the Pcom showed significant differences between the recurrence group and stable group (0.630 ± 0.062 and 0.926 ± 0.051, P= 0.016; 56.4 ± 8.9 and 121.6 ± 6.7, P= 0.008, respectively). CONCLUSIONS: Our results suggest that hemodynamic factors may be associated with aneurysm recurrence among Pcom aneurysms. Velocity and flow rate in the Pcom may be a pretreatment prognostic factor for aneurysm recurrence after endovascular treatment.

Magnetic resonance image (MRI) is now widely used for imaging follow-up for post coiling brain aneurysms. However, the accuracy on the estimation of residual aneurysm, which is crucial for the retreatment planning, remains to be controversial. The purpose of this study is to evaluate a new post-processing technique that provides improved estimation of the residual aneurysm after coil embolization. One hundred aneurysms on 93 patients who underwent coil embolization for brain aneurysm were evaluated using the 1.5 Tesla time-resolved magnetic resonance angiography (TR-MRA) one year after the treatment. To minimize the inter-observer variability caused by the window level adjustment, an automatic post processing protocol using the full-width at half-maximum (FWHM) value was utilized. The result was then compared with that from the conventional cerebral angiography. Of the 97 aneurysms that underwent both TR-MRA and DSA, 23 (23.7%) showed residual neck / dome during follow-up. After window level adjustment, the size of the parent artery in the TR-MRA was consistent with that in the DSA. The reconstructed Volume Rendering images provided clear contours of the residual aneurysms and contributed to the understanding the configuration of residual aneurysm. The largest and the smallest diameter of the residual aneurysms was larger in the TR-MRA than in the DSA (8.05 vs. 7.72 mm, p = 0.0004; 4.99 vs. 4.19 mm, p = 0.007 respectively). The sensitivity, specificity, and positive and negative predictive values of TR-MRA compared to DSA were 100%, 97%, 73%, and 100%, respectively. Using the FWHM value to optimize the window level adjustment, the size of the residual component observed in the TR-MRA was larger compared to that in the DSA whereas the size of neck and the parent artery showed consistency between the two modalities. This image processing technique can be used as an effective screening tool for evaluating residual component in post-coiling brain aneurysms.

BACKGROUND AND PURPOSE: Precise stent deployment is important for successful treatment of intracranial aneurysms by stent-assisted coiling (SAC). We evaluated the accuracy of virtual stents generated using commercial stent planning software by comparing the length of virtual and actually deployed intracranial laser cut stents on three-dimensional digital subtraction angiography (3D-DSA) images. METHODS: We retrospectively analyzed the data of 75 consecutive cases of intracranial wide-necked aneurysms treated with the SAC technique using laser cut stents. Based on 3D-DSA images acquired by C-arm CT, stent sizing and placement were intraoperatively simulated by a commercial software application. The difference in length of the stents was estimated by measuring proximal discrepancies between the end points of the virtual and actually deployed stents on fused pre-procedural and post-procedural 3D-DSA images. Discrepancies between distal stent end points were manually minimized. The Kruskal-Wallis test was applied to test whether stent location, type, and length had an effect on difference in length between virtual and real stent. RESULTS: The median difference in length between virtual and real stents was 1.58 mm with interquartile range 1.12-2.12 mm. There was no evidence for an effect of stent location (p = 0.23), stent type (p = 0.33), or stent length (p = 0.53) on difference in length between virtual and real stents. CONCLUSIONS: Stent planning software allows 3D simulation of laser cut stents overlain on 3D-DSA images of vessels and may thus be useful for stent selection and deployment of laser cut stents during stent-assisted coiling of intracranial aneurysms.

The authors report on the histologic and immunohistochemical analyses of a cerebral aneurysm embolized with platinum coils and with the longest observation period. A 58-year-old woman presenting with subarachnoid hemorrhage due to ruptured basilar top aneurysm was treated with Guglielmi detachable coils (GDC) 22 years ago. She was the 15th case since the GDC was introduced. After she died of unrelated causes, an autopsy and thorough histologic examination were performed. Gross examination revealed no adhesion between the aneurysm wall and the surrounding brain tissue. Histologic and immunohistochemical analyses demonstrated that the cavity of the aneurysm was filled with homogeneous collagenous fibrous tissue, while the neck was completely covered by a dense collagenous neointima and a smooth muscle cell layer. The unique histologic results of this case may contribute to a better understanding of the long-term evolution of the healing process in intracranial aneurysms successfully treated with the GDC.

Magnetic resonance image (MRI) is now widely used for imaging follow-up for post coiling brain aneurysms. However, the accuracy on the estimation of residual aneurysm, which is crucial for the retreatment planning, remains to be controversial. The purpose of this study is to evaluate a new post-processing technique that provides improved estimation of the residual aneurysm after coil embolization. One hundred aneurysms on 93 patients who underwent coil embolization for brain aneurysm were evaluated using the 1.5 Tesla time-resolved magnetic resonance angiography (TR-MRA) one year after the treatment. To minimize the inter-observer variability caused by the window level adjustment, an automatic post processing protocol using the full-width at half-maximum (FWHM) value was utilized. The result was then compared with that from the conventional cerebral angiography. Of the 97 aneurysms that underwent both TR-MRA and DSA, 23 (23.7%) showed residual neck / dome during follow-up. After window level adjustment, the size of the parent artery in the TR-MRA was consistent with that in the DSA. The reconstructed Volume Rendering images provided clear contours of the residual aneurysms and contributed to the understanding the configuration of residual aneurysm. The largest and the smallest diameter of the residual aneurysms was larger in the TR-MRA than in the DSA (8.05 vs. 7.72 mm, p = 0.0004; 4.99 vs. 4.19 mm, p = 0.007 respectively). The sensitivity, specificity, and positive and negative predictive values of TR-MRA compared to DSA were 100%, 97%, 73%, and 100%, respectively. Using the FWHM value to optimize the window level adjustment, the size of the residual component observed in the TR-MRA was larger compared to that in the DSA whereas the size of neck and the parent artery showed consistency between the two modalities. This image processing technique can be used as an effective screening tool for evaluating residual component in post-coiling brain aneurysms.

Background and purpose

Precise stent deployment is important for successful treatment of intracranial aneurysms by stent-assisted coiling (SAC). We evaluated the accuracy of virtual stents generated using commercial stent planning software by comparing the length of virtual and actually deployed intracranial laser cut stents on three-dimensional digital subtraction angiography (3D-DSA) images.

Methods

We retrospectively analyzed the data of 75 consecutive cases of intracranial wide-necked aneurysms treated with the SAC technique using laser cut stents. Based on 3D-DSA images acquired by C-arm CT, stent sizing and placement were intraoperatively simulated by a commercial software application. The difference in length of the stents was estimated by measuring proximal discrepancies between the end points of the virtual and actually deployed stents on fused pre-procedural and post-procedural 3D-DSA images. Discrepancies between distal stent end points were manually minimized. The Kruskal-Wallis test was applied to test whether stent location, type, and length had an effect on difference in length between virtual and real stent.

Results

The median difference in length between virtual and real stents was 1.58 mm with interquartile range 1.12-2.12 mm. There was no evidence for an effect of stent location (p = 0.23), stent type (p = 0.33), or stent length (p = 0.53) on difference in length between virtual and real stents.

Conclusions

Stent planning software allows 3D simulation of laser cut stents overlain on 3D-DSA images of vessels and may thus be useful for stent selection and deployment of laser cut stents during stent-assisted coiling of intracranial aneurysms.

PURPOSE: We used an imaging technique based on 3-dimensional (3D) C-arm CT to assess the apposition of three types of stents after coiling of intracranial aneurysms. METHODS: All patients with intracranial aneurysms were considered who received stent-assisted coiling with Enterprise2, Neuroform EZ, or Neuroform Atlas stents confirmed by C-arm CT imaging at our institution between June 2015 and November 2017. A 3D digital subtraction angiography (DSA) scan for vessel imaging followed by a high-resolution cone beam CT (HR-CBCT) scan for coil and stent imaging was performed. The images were fused to obtain dual volume 3D fusion images. We investigated malapposition of the stent trunk (crescent sign) and of the stent edges (edge malapposition) and used the χ2 statistic to test for an association with stent types. Inter-rater agreement between two raters was estimated using Cohens kappa statistics. RESULTS: We evaluated 75 consecutive cases. Enterprise2 stents were used in 22 cases, Neuroform EZ in 26, and Neuroform Atlas in 27 cases. By stent type, crescent sign was detected in 27% of Enterprise2, 8% of Neuroform EZ, and none of Neuroform Atlas stents (p=0.007), while edge malapposition was detected in 27% of Enterprise2, 58% of Neuroform EZ, and 30% of Neuroform Atlas stents (p=0.05). Excellent (κ=0.81) and good (κ=0.78) agreement between the raters was found for the detection of edge apposition and crescent sign, respectively. CONCLUSION: Stent malapposition was clearly visualized by dual volume 3D imaging. The Neuroform Atlas stents showed good apposition even in vessels with strong curvature.