Everand Logo

Welcome to Everand!

  • Discover millions of ebooks, audiobooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    Power Plant Cooling Technologies
    Power Plant Cooling Technologies
    Power Plant Cooling Technologies
    Ebook113 pages3 hours

    Power Plant Cooling Technologies

    By Mir Akbar Hessami

    5/5

    ()

    Read preview

    About this ebook

    Hybrid cooling systems could potentially save water. Water shortage is a major problem facing the power industry in many nations around the world. The largest consumer of water in most power plants is the wet cooling tower. To assist water and energy saving for thermal power stations using conventional evaporative wet cooling towers, a novel hybrid cooling system is investigated in this book.
    Research on cooling systems to date has focussed on the individual components of cooling systems, not the system as a whole. Most of this research has been dedicated to cooling tower design and the optimisation of cooling tower characteristics. The issue of conserving water due to evaporation from existing operations has not been highly considered in the past. The major drawback in most of the previously conducted research in this field is the gap between maintaining energy efficiency whilst trying to reduce water consumption.
    A hybrid cooling system consisting of a metal hydride heat pump and an existing cooling tower is described in this book. In addition to water saving, the hybrid cooling concept presented in this book also has the potential to improve energy efficiency and possibly reduce CO2 emission by recovering and upgrading the “waste” energy from the cooling water stream. This is therefore a win-win technology, producing both water and energy savings of significant quantities.

    LanguageEnglish
    PublisherMir Akbar Hessami
    Release dateMay 2, 2011
    ISBN9781458173782
    Power Plant Cooling Technologies
    Author

    Mir Akbar Hessami

    Dr. Mir-Akbar Hessami received his BSc in Mechanical Engineering in 1976 from Kabul University, Afghanistan before going to North America. He completed his MSc/MEng degree in 1979 at the University of Hawaii, USA and his PhD in 1983 at the University of Calgary, Canada. He moved to Australia in 1983, and started working in the School of Mechanical and Manufacturing Engineering at the University of New South Wales. He then worked for BHP Research and Technology Centre between 1985 and 1987 before taking up an academic position at the Victoria University in 1987. In 1991, he started working at Monash University as a Senior Lecturer in the area of Energy Conversion and Heat Transfer. His research specialty in the mainstream engineering field is in the area of energy technology production, utilisation and conservation. Dr. Hessami has written many journal and conference papers on this topic. His recent research project has dealt with the performance of compact heat exchangers with specific focus on cross-corrugated plate heat exchangers. He is currently working on an experimental study of heat transfer enhancement in pipes caused by fluid pulsation. Dr. Hessami's area of teaching is in Heat Transfer, Thermodynamics, and Refrigeration and Air-conditioning. He has authored a textbook entitled Applied Thermodynamics: Power Production from Conventional and Renewable Sources.

    Related to Power Plant Cooling Technologies

    Related ebooks

    Chemistry For You

    View More
    View More

    Related podcast episodes

    Related articles

    • UNLIMITED

      A Healthy Cooling Tower

      Aug 23, 2018

      A Healthy Cooling Tower
      3 min read

    • UNLIMITED

      Prevention Is Better Than Cure

      Jun 24, 2018

      Prevention Is Better Than Cure
      5 min read

    • UNLIMITED

      Hydrogen: The Future Of Cars?

      Apr 15, 2021

      Hydrogen: The Future Of Cars?
      2 min read

    • UNLIMITED

      Heat Things Up at Home

      May 8, 2020

      Shortcomings of fossil-fuel heating continue to mount, including combustion safety, fuel price volatility, air quality, and climate pressures. Conventional fossil-fuel heating systems generate heat by fuel combustion, which transforms chemical energy

      9 min read

    • UNLIMITED

      Water-based Battery Stores Green Energy For Later

      May 1, 2018

      A new water-based battery could provide a cheap way to store wind or solar energy for later, researchers say. The battery stores energy generated when the sun is shining and wind is blowing so it can be fed back into the electric grid and redistribut

      4 min read

    • UNLIMITED

      Micro’s Scope

      Dec 6, 2019

      Micro’s Scope
      6 min read

    • UNLIMITED

      Exchange Programme

      Sep 1, 2023

      Exchange Programme
      13 min read

    • UNLIMITED

      New Solar Panel Material Can Take More Heat

      Dec 4, 2018

      A new synthetic material will make solar energy a more cost-effective, efficient, and reliable source of power Clean energy is at a crossroads. To become a viable replacement for fossil fuels, solar power plants must first improve their efficiency to

      2 min read

    • UNLIMITED

      Focus On Heating An Outdoor Pool

      Jun 1, 2023

      Focus On Heating An Outdoor Pool
      4 min read

    • UNLIMITED

      Temperature's Rising

      Feb 7, 2024

      Temperature's Rising
      8 min read

    • UNLIMITED

      It’s Debatable

      Nov 1, 2023

      New York’s mandate for electric-only heating systems in new buildings is a progressive step towards environmental sustainability. Still, it comes with significant drawbacks that cannot be ignored. While the goal of reducing greenhouse gas emissions i

      3 min read

    • UNLIMITED

      Heat Of The Moment

      Jul 5, 2019

      Heat Of The Moment
      10 min read

    • UNLIMITED

      3 Plans To Avoid Blackouts Using 100% Renewable Energy

      Feb 12, 2018

      Researchers have proposed three different methods for providing consistent power in 139 countries using 100 percent renewable energy. The inconsistencies of power produced by wind, water, and sunlight and the continuously fluctuating demand for energ

      4 min read

    • UNLIMITED

      Long-Duration Energy Storage Is Key To Cleaning Up The Power Grid

      May 30, 2023

      Long-duration storage could offer greater grid flexibility because it can store large amounts of energy.

      4 min read

    • UNLIMITED

      Water-based Air Conditioner Cools Without Harmful Chemicals

      Jan 17, 2018

      A new water-based air-conditioning system cools air to as low as 18 degrees Celsius (about 64 degrees Fahrenheit) without using energy-intensive compressors and environmentally harmful chemical refrigerants. “…our technology has immense potential to

      2 min read

    • UNLIMITED

      The Second Coming Of Nuclear Power

      Jan 14, 2022

      The Second Coming Of Nuclear Power
      10 min read

    • UNLIMITED

      Technologue

      Aug 28, 2020

      Technologue
      2 min read

    • UNLIMITED

      Flow Battery For Green Energy Doubles Max Voltage

      Jul 26, 2018

      A new type of flow battery that involves a liquid metal more than doubles the maximum voltage of conventional flow batteries and could lead to affordable storage of renewable power. The technology has long been considered as a likely candidate for st

      2 min read

    • UNLIMITED

      Meet The Intelligent Heat Pump

      Nov 26, 2020

      Air source heat pumps are a topic I have written much about and I have discussed published performance figures with many very clever engineers. Most agree that the technology is sound, but the way the systems are connected to our homes often leaves a

      2 min read

    Related categories

    Reviews for Power Plant Cooling Technologies

    5/5

    2 ratings0 reviews

    What did you think?

    Tap to rate

    Review must be at least 10 words

      Book preview

      Power Plant Cooling Technologies - Mir Akbar Hessami

      Power plant cooling technologies

      Hybrid cooling systems can save water

      Authors:

      Ferdi Yilmaz, Deakin University, Geelong

      Mir-Akbar Hessami, Monash University, Clayton

      Abbas Kouzani, Deakin University, Geelong

      Eric Hu, The University of Adelaide, Adelaide

      ****

      COPYRIGHT

      Power plant cooling technologies

      Publication date February 2011.

      Copyright © 2011

      Ferdi Yilmaz, Mir-Akbar Hessami, Abbas Kouzani and Eric Hu (the authors) have asserted their right under the Copyright Act 1968 to be identified as the authors of this work.

      All rights reserved. Without limiting the rights under copyright reserved above, no part of this publication may be reproduced, stored in or introduced into a retrieval system, or transmitted, in any form, or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of both the copyright owner and the above publisher of this book.

      Photographs and images are the copyright of the authors unless otherwise identified.

      ISBN 978-1-4581-7378-2

      Synopsis

      Hybrid cooling systems could potentially save water…

      Water shortage is a major problem facing the power industry in many nations around the world. The largest consumer of water in most power plants is the wet cooling tower. To assist water and energy saving for thermal power stations using conventional evaporative wet cooling towers, a novel hybrid cooling system is investigated in this book.

      Research on cooling systems to date has focussed on the individual components of cooling systems, not the system as a whole. Most of this research has been dedicated to cooling tower design and the optimisation of cooling tower characteristics. The issue of conserving water due to evaporation from existing operations has not been highly considered in the past. The major drawback in most of the previously conducted research in this field is the gap between maintaining energy efficiency whilst trying to reduce water consumption.

      A hybrid cooling system consisting of a metal hydride heat pump and an existing cooling tower is described in this book. In addition to water saving, the hybrid cooling concept presented in this book also has the potential to improve energy efficiency and possibly reduce CO2 emission by recovering and upgrading the waste energy from the cooling water stream. This is therefore a win-win technology, producing both water and energy savings of significant quantities.

      Smashwords Edition License Notes

      This ebook is licensed for your personal enjoyment only. This ebook may not be re-sold or given away to other people. If you would like to share this book with another person, please purchase an additional copy for each person you share it with. If you're reading this book and did not purchase it, or it was not purchased for your use only, then you should return to Smashwords.com and purchase your own copy. Thank you for respecting the hard work of the authors.

      ****

      CONTENTS

      Preface

      List of symbols

      List of abbreviations

      Acknowledgements

      Chapter 1: introduction

      Chapter 2: power plant cooling systems

      Chapter 3: mathematical model of cooling towers

      Chapter 4: metal hydride heat pumps

      Chapter 5: conclusions

      References

      Authors’ biographies

      Preface

      The material presented in this book is based on the results of a joint research project undertaken at both Deakin University (Geelong) and Monash University (Clayton). Most of the content of this book is derived from a MEng thesis submitted by the first author to Deakin University.

      The book starts with a general introduction to power generation in Chapter 1 and it highlights the need for an efficient cooling system which can reduce water losses in conventional power plant cooling towers. In Chapter 2, conventional cooling systems employing dry and wet cooling towers are described, and the existing methods used to reduce water losses are explained. The concept of a hybrid cooling system and its potential to reduce water consumption is introduced. A mathematical description of conventional dry and wet cooling towers is provided in Chapter 3 which also includes a comparison between the simulation results and actual data obtained from local power plants. Chapter 4 is dedicated to the full description of the hybrid cooling system which is the main focus of this study. It is illustrated that this novel cooling system is based on the use of a metal hydride heat pump which can be used to pre-cool the water before it enters the cooling tower. It includes a detailed mathematical model of the processes involved with the heat pump component, and a comparison of the results obtained from the model with such data from the open literature. The effect of this pre-cooling process is shown to be a reduction in the evaporation rate of water as it flows through the tower. The findings of this research are summarised in Chapter 5.

      Water shortage is a major problem facing the power industry in many nations around the world. The largest consumer of water in most power plants is the wet cooling tower. To assist water and energy saving for thermal power stations using conventional evaporative wet cooling towers, a novel hybrid cooling system is investigated in this book. Hybrid cooling systems may consist of all or some of an air pre-cooler, a heat pump, heat exchangers, and adsorption chillers together with the existing cooling tower. The hybrid cooling system described in this book, consisting of a metal hydride heat pump operating in conjunction with the existing wet cooling tower, is capable of achieving water saving by reducing the temperature of warm water entering the cooling tower. Cooler inlet water temperatures effectively reduce the cooling load on existing towers. This will ultimately reduce the amount of water lost to the air by evaporation whilst still achieving the same cooling output. At the same time, the low grade waste energy upgraded by the metal hydride heat pump, in the process of cooling the water, can be used to replace the bled-off steam for the lower stage feed heaters which will increase overall cycle efficiency.

      The book is expected to be of interest to:

      (a) engineering students who study power generation and related technologies used in the cooling of the working fluid,

      (b) practicing engineers who are employed in the power industry, and

      (c) academics and researchers who work in this area of engineering.

      The material presented herein is written in a self-explanatory style and it does not require a high level of understanding and knowledge of thermodynamics and/or engineering practice. If more in depth knowledge in this area of engineering technology and research is required, the extensive list of references at the end of the book can be consulted.

      Mir-Akbar Hessami

      November 2010, Melbourne, Australia

      List of Symbols

      Roman symbols

      A Area m2

      C_p Specific heat capacity J/kg K

      COP Co-efficient of performance dimensionless

      D Diameter mm, m

      F Correction factor dimensionless

      h Specific enthalpy kJ/kg

      H Height m

      ∆H Heat of formation kJ/kmolH2

      H_2 Hydrogen dimensionless

      k Thermal conductivity W/m K

      L Length m

      m ̇ Mass

      Enjoying the preview?
      Page 1 of 1