Everand Logo

Welcome to Everand!

  • Discover millions of ebooks, audiobooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    U.S. Army Guide to Rigging
    U.S. Army Guide to Rigging
    U.S. Army Guide to Rigging
    Ebook338 pages1 hour

    U.S. Army Guide to Rigging

    By U.S. Department of the Army

    4/5

    ()

    Read preview

    About this ebook

    Have you ever tried to rig your own sailboat? How about tying up the boat to the dock? Have you ever made a ladder or hoist? Learning rigging can be tricky, but with the U.S. Army Guide to Rigging (FM 5-125), you’ll learn everything you need to know about rigging, from how to properly tie a rope to a rock to how to make rope chairs and build whole scaffolding structures! This comprehensive guide is full of crucial rigging techniques, procedures, and applications used in both dire and everyday situations everywhere by the U.S. Army.

    This informative and thorough guide draws upon the real-life experiences of soldiers installed in positions around the globe, whose duties require rigging, in all its variations and forms. Topics include the necessary usage of fiber rope, wire rope, and chains—used in multiple combinations and twists—to lift heavy loads. On the more basic side, it includes basic instructions on tying all manner of knots, hitches, splices, tackle systems, and more. Complete with illustrated diagrams to make it easy to follow along, anyone can access easy-to-learn rigging lessons that will come in handy both in your daily life and when you least expect it!
    LanguageEnglish
    PublisherSkyhorse
    Release dateJan 8, 2013
    ISBN9781620879221
    U.S. Army Guide to Rigging
    Author

    U.S. Department of the Army

    The  Department of the Army  (DA) is one of the three military departments within the  Department of Defense of the United States of America. Its mission is to fight and win our Nation’ s wars by providing prompt, sustained land dominance across the full range of military operations and spectrum of conflict in support of combatant commanders.

    Read more from U.S. Department Of The Army

    Related to U.S. Army Guide to Rigging

    Related ebooks

    Crafts & Hobbies For You

    View More
    View More

    Related podcast episodes

    Related categories

    Reviews for U.S. Army Guide to Rigging

    4/5

    1 rating0 reviews

    What did you think?

    Tap to rate

    Review must be at least 10 words

      Book preview

      U.S. Army Guide to Rigging - U.S. Department of the Army

      Preface

      This manual is a guide and basic reference for personnel whose duties require the use of rigging. It is intended for use in training and as a reference manual for field operations. It covers the types of rigging and the application of fiber rope, wire rope, and chains used in various combinations to raise or move heavy loads. It includes basic instructions on knots, hitches, splices, lashing, and tackle systems. Safety precautions and requirements for the various operations are listed, as well as rules of thumb for rapid safe-load calculations.

      The material contained herein is applicable to both nuclear and nonnuclear warfare.

      The proponent for this publication is Headquarters (HQ), United States (US) Army Training and Doctrine Command (TRADOC). Users of this manual are encouraged to submit recommended changes or comments on Department of the Army (DA) Form 2028 and forward them to: Commandant, US Army Engineer School, ATTN: ATSE-T-PD-P, Fort Leonard Wood, Missouri 65473-6500.

      Unless otherwise stated, masculine nouns and pronouns do not refer exclusively to men.

      CHAPTER 1

      Rope

      Section 1. Fiber Rope

      In the fabrication of fiber rope, a number of fibers of various plants are twisted together to form yarns. These yarns are then twisted together in the opposite direction of the fibers to form strands (see Figure 1-1, page 1-2). The strands are twisted in the opposite direction of the yarns to form the completed rope. The direction of twist of each element of the rope is known as the lay of that element. Twisting each element in the opposite direction puts the rope in balance and prevents its elements from unlaying when a load is suspended on it. The principal type of fiber rope is the three-strand, right lay, in which three strands are twisted in a right-hand direction. Four-strand ropes, which are also available, are slightly heavier but are weaker than three-strand ropes of the same diameter.

      TYPES OF FIBERS

      The term cordage is applied collectively to ropes and twines made by twisting together vegetable or synthetic fibers.

      VEGETABLE FIBERS

      The principal vegetable fibers are abaca (known as Manila), sisalana and henequen (both known as sisal), hemp, and sometimes coir, cotton, and jute. The last three are relatively unimportant in the heavy cordage field.

      Abaca, sisalana, and henequen are classified as hard fibers. The comparative strengths of the vegetable fibers, considering abaca as 100, are as follows:

      Manila

      This is a strong fiber that comes from the leaf stems of the stalk of the abaca plant, which belongs to the banana family. The fibers vary in length from 1.2 to 4.5 meters (4 to 15 feet) in the natural states. The quality of the fiber and its length give Manila rope relatively high elasticity, strength, and resistance to wear and deterioration. The manufacturer treats the rope with chemicals to make it more mildew resistant, which increases the rope’s quality. Manila rope is generally the standard item of issue because of its quality and relative strength.

      Sisal

      Sisal rope is made from two tropical plants, sisalana and henequen, that produce fibers 0.6 to 1.2 meters (2 to 4 feet) long. Sisalana produces the stronger fibers of the two plants, so the rope is known as sisal. Sisal rope is about 80 percent as strong as high quality Manila rope and can be easily obtained. It withstands exposure to sea water very well and is often used for this reason.

      Figure 1-1. Cordage of rope construction

      Hemp

      This tall plant is cultivated in many parts of the world and provides useful fibers for making rope and cloth. Hemp was used extensively before the introduction of Manila, but its principal use today is in fittings, such as ratline, marline, and spun yarn. Since hemp absorbs much better than the hard fibers, these fittings are invariably tarred to make them more water-resistant. Tarred hemp has about 80 percent of the strength of untarred hemp. Of these tarred fittings, marline is the standard item of issue.

      Coir and Cotton

      Coir rope is made from the fiber of coconut husks. It is a very elastic, rough rope about one-fourth the strength of hemp but light enough to float on water. Cotton makes a very smooth white rope that withstands much bending and running. These two types of rope are not widely used in the military; however, cotton is used in some cases for very small lines.

      Jute

      Jute is the glossy fiber of either of two East Indian plants of the linden family used chiefly for sacking, burlap, and cheaper varieties of twine and rope.

      SYNTHETIC FIBERS

      The principal synthetic fiber used for rope is nylon. It has a tensile strength nearly three times that of Manila. The advantage of using nylon rope is that it is waterproof and has the ability to stretch, absorb shocks, and resume normal length. It also resists abrasion, rot, decay, and fungus growth.

      CHARACTERISTICS OF FIBER ROPE

      Fiber rope is characterized by its size, weight, and strength.

      SIZE

      Fiber rope is designated by diameter up to 5/8 inch, then it is designated by circumference up to 12 inches or more. For this reason, most tables give both the diameter and circumference of fiber rope.

      WEIGHT

      The weight of rope varies with use, weather conditions, added preservatives, and other factors. Table 1-1, page 1-4, lists the weight of new fiber rope.

      STRENGTH

      Table 1-1 lists some of the properties of Manila and sisal rope, including the breaking strength (B S), which is the greatest stress that a material is capable of withstanding without rupture. The table shows that the minimum BS is considerably greater than the safe load or the safe working capacity (SWC). This is the maximum load that can safely be applied to a particular type of rope. The difference is caused by the application of a safety factor. To obtain the SWC of rope, divide the BS by a factor of safety (FS):

      SWC = BS/FS

      A new 1-inch diameter, Number 1 Manila rope has a BS of 9,000 pounds (see Table 1-1). To determine the rope’s SWC, divide its BS (9,000 pounds) by a minimum standard FS of 4. The result is a SWC of 2,250 pounds. This means that you can safely apply 2,250 pounds of tension to the new 1-inch diameter, Number 1 Manila rope in normal use. Always use a FS because the BS of rope becomes reduced after use and exposure to weather conditions. In addition, a FS is required because of shock loading, knots, sharp bends, and other stresses that rope may have to withstand during its use. Some of these stresses reduce the strength of rope as much as 50 percent. If tables are not available, you can closely approximate the SWC by a rule of thumb. The rule of thumb for the SWC, in tons, for fiber rope is equal to the square of the rope diameter (D) in inches:

      SWC = D²

      The SWC, in tons, of a 1/2-inch diameter fiber rope would be 1 /2 inch squared or 1 /4 ton. The rule of thumb allows a FS of about 4.

      Table 1-1. Properties of manila and sisal rope

      CARE OF FIBER ROPE

      The strength and useful life of fiber rope is shortened considerably by improper care. To prolong its life and strength, observe the following guidelines:

      • Ensure that it is dry and then stored in a cool, dry place. This reduces the possibility of mildew and rotting.

      • Coil it on a spool or hang it from pegs in a way that allows air circulation.

      • Avoid dragging it through sand or dirt or pulling it over sharp edges. Sand or grit between the fibers cuts them and reduces the rope’s strength.

      • Slacken taut lines before they are exposed to rain or dampness because a wet rope shrinks and may break.

      • Thaw a frozen rope completely before using it; otherwise the frozen fibers will break as they resist bending.

      • Avoid exposure to excessive heat and fumes or chemicals; heat or boiling water decreases rope strength about 20 percent.

      HANDLING OF FIBER ROPE

      New rope is coiled, bound, and wrapped in burlap. The protective covering should not be removed until the rope is to be used. This protects it during storage and prevents tangling. To open the new rope, strip off the burlap wrapping and look inside the coil for the end of the rope. This should be at the bottom of the coil (see Figure 1-2). li it is not, turn the coil over so the end is at the bottom. Pull the end up through the center of the coil. As the rope comes up, it unwinds in a counterclockwise direction.

      Figure 1-2. Uncoiling and coiling rope

      INSPECTION OF FIBER ROPE

      The outside appearance of fiber rope is not always a good indication of its internal condition. Rope softens with use. Dampness, heavy strain, fraying and breaking of strands, and chafing on rough edges all weaken it considerably. Overloading rope may cause it to break, with possible heavy damage to material and serious injury to personnel. For this reason, inspect it carefully at regular intervals to determine its condition. Untwist the strands slightly to open a rope so that you can examine the inside. Mildewed rope has a musty odor and the inner fibers of the strands have a dark, stained appearance. Broken strands or broken yarns ordinarily are easy to identify. Dirt and sawdust-like material inside a rope, caused by chafing, indicate damage. In rope having a central core, the core should not break away in small pieces when examined. If it does, this is an indication that a rope has been overstrained.

      If a rope appears to be satisfactory in all other respects, pull out two fibers and try to break them. Sound fibers should offer considerable resistance to breakage. When you find unsatisfactory conditions, destroy a

      Enjoying the preview?
      Page 1 of 1