Alkyd Mica Iron Oxide Intermediate Paint

这里可以自定义设置

PRODUCT DESCRIPTION

This product is an anti-rust paint based on medium oil dry vegetable oil modified alkyd resin. This lead-free product has the advantages of non-toxicity, strong adhesion, good anti-rust ability and nitro resistance. In addition, under general climatic conditions, the product has great durability.

Typical Uses:

In light to medium corrosive environment, when matched with other alkyd paints, this product can be used on internal and external surface of steel plate and wood structure.

这里可以自定义设置

PRODUCT SELLING POINT

● The epoxy floor paint is mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements.

● Main advantages of this paint are great resistance of slippery, electrostatic, acid and alkali.

● Moreover, it also has good resistance to organic solvent, heavy load and abrasion.

● Besides, it combines incredible hardness and bonding power to provide a heavy duty and to be used as topcoat.

PRODUCT ADVANTAGES

Extend the service life by 2-3 years

Resistance (chemical medium) 98% sulfuric acid, 30% hydrochloric acid carefree

Five years bright as new, 5.99% Improve the yield of sensitive devices by 99%

50% Avoid slips and increase safety by 50%

这里可以自定义设置

PRODUCT PARAMETER

Mixingv	Ready to use
Thinner	Alkyd thinner
Airless spray	Nozzle tip: 0.017~0.023 inches Spray pressure: 15~18Mpa Thinner ratio: 5~15% (by weight of paint)
Brush, Roller	Recommended Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(40um)	5h	1h	30min
To handle(40um)	48h	24h	12h
Min. recoating time	36h	24h	12h

* Make sure no chalking and other contaminations before recoating

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions

PRODUCT SPECIFICATIONS

Color	Gray, reddish brown, grayish brown
Gloss	Matte, flat
Density	~1.55Kg/L
Solid Volume	(58±2)%
Standard Film thickness	80um dry film thickness (about 138um wet film thickness)
Theoretical spreading rate	4.67m²/Kg (80um dry film thickness)
Flash Point	35℃

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.