Is there a wiring schematic for a Kenmore FMC4X600AT house air conditioner?

I am the expert and it will be my pleasure to help you

Can you confirm the model number please?

Perfect. I know this unit very well. What do you need exactly?

Sure one moment please

http://icpindexing.toddsit.com/documents/086477/49604420101.pdf

Page 3

Give me another model then, this is for your unit

One moment please

No, it’s the same

OK, what do you need to know?

R is the power

G is the fan

W is the heat

Y is the AC

O is the reversing valve for a heat pump

C is common 24v

HUM is for a humidifier

None. No jumpers needed. Jumpers are not needed for a furnace with an AC

Yes, same Y and C

Y and C. Then you go to the outside unit, and connect them in Y and C as well.

Colours mean nothing. As long as the same wire goes to the same terminal on both ends. For example, C to C could be purple, as long as it goes to C on both ends

Yes

Yes, Y and C

You already have them in in your picture ;)

Sorry I am on an installation in an attic and texting you same time

Because it leaves you the choice to wire them in DX+ DX- C and R, or R C W G Y

Because it leaves you the choice to wire them in DX+ DX- C and R, or R C W G Y. Yes, bottom

Meaning, you don’t want to go to your AC and open it? Haha

To reassure you, no damage at all

Your inside unit does not have Y2, so only Y1

Show me how you connected everything

Red is connected to C at your AC, but in your air handler it’s Blue that is connected to C

Still there?

Well done. So proud of you. So heartwarming.