An endoscope is an inspection instrument composed of image sensor, optical lens, light source and mechanical device, which is used to look deep into the body by way of openings such as the mouth or anus. A typical endoscope applies several modern technologies including optics, ergonomics, precision mechanics, electronics, and software engineering. With an endoscope, it is possible to observe lesions that cannot be detected by X-ray, making it useful in medical diagnosis. An endoscope uses tubes only a few millimeters thick to transfer illumination in one direction and high-resolution video in the other, allowing minimally invasive surgeries.[1] It is used to examine the internal organs like the throat or esophagus. Specialized instruments are named after their target organ. Examples include the cystoscope (bladder), nephroscope (kidney), bronchoscope (bronchus), arthroscope (joints) and colonoscope (colon), and laparoscope (abdomen or pelvis).[2] They can be used to examine visually and diagnose, or assist in surgery such as an arthroscopy.
"Endo-" is a scientific Latin prefix derived from ancient Greek ἐνδο- (endo-) meaning "within", and "-scope" comes from the modern Latin "-scopium", from the Greek σκοπεῖν (skopein) meaning to "look at" or "to examine".[3]
The first endoscope was developed in 1806 by German physician Philipp Bozzini with his introduction of a "Lichtleiter" (light conductor) "for the examinations of the canals and cavities of the human body".[4] However, the College of Physicians in Vienna disapproved of such curiosity.[5] The first effective open-tube endoscope was developed by French physician Antonin Jean Desormeaux.[6] He was also the first one to use an endoscope in a successful operation.[7]
After the invention of Thomas Edison, the use of electric light was a major step in the improvement of endoscope. The first such lights were external although sufficiently capable of illumination to allow cystoscopy, hysteroscopy and sigmoidoscopy as well as examination of the nasal (and later thoracic) cavities as was being performed routinely in human patients by Sir Francis Cruise (using his own commercially available endoscope) by 1865 in the Mater Misericordiae Hospital in Dublin, Ireland.[8] Later, smaller bulbs became available making internal light possible, for instance in a hysteroscope by Charles David in 1908.[9]
Hans Christian Jacobaeus has been given credit for the first large published series of endoscopic explorations of the abdomen and the thorax with laparoscope (1912) and thoracoscope (1910)[10] although the first reported thoracoscopic examination in a human was also by Cruise.[11]
Laparoscope was used in the diagnosis of liver and gallbladder disease by Heinz Kalk in the 1930s.[12] Hope reported in 1937 on the use of laparoscopy to diagnose ectopic pregnancy.[13] In 1944, Raoul Palmer placed his patients in the Trendelenburg position after gaseous distention of the abdomen and thus was able to reliably perform gynecologic laparoscope.[14]
Georg Wolf, a Berlin manufacturer of rigid endoscopes established in 1906, produced the Sussmann flexible gastroscope in 1911.[15][16] Karl Storz began producing instruments for ENT specialists in 1945 through his company, Karl Storz GmbH.[17]
Basil Hirschowitz, Larry Curtiss, and Wilbur Peters invented the first fiber optic endoscope in 1957.[18] Earlier in the 1950s Harold Hopkins had designed a "fibroscope" consisting of a bundle of flexible glass fibres able to coherently transmit an image. This proved useful both medically and industrially, and subsequent research led to further improvements in image quality.
The previous practice of a small filament lamp on the tip of the endoscope had left the choice of either viewing in a dim red light or increasing the light output – which carried the risk of burning the inside of the patient. Alongside the advances to the optics, the ability to 'steer' the tip was developed, as well as innovations in remotely operated surgical instruments contained within the body of the endoscope itself. This was the beginning of "key-hole surgery" as we know it today.[19]
There were physical limits to the image quality of a fibroscope. A bundle of 50,000 fibers would only give a 50,000-pixel image, and continued flexing from use breaks fibers and progressively loses pixels. Eventually, so many are lost that the whole bundle must be replaced at a considerable expense) . Harold Hopkins realised that any further optical improvement would require a different approach. Previous rigid endoscopes suffered from low light transmittance and poor image quality. The surgical requirement of passing surgical tools as well as the illumination system within the endoscope's tube which itself is limited in dimensions by the human body left very little room for the imaging optics.[citation needed] The tiny lenses of a conventional system required supporting rings that would obscure the bulk of the lens' area. They were also hard to manufacture and assemble and optically nearly useless.[citation needed]
The elegant solution that Hopkins invented was to fill the air-spaces between the 'little lenses' with rods of glass. These rods fitted exactly the endoscope's tube making them self-aligning and requiring of no other support.[citation needed] They were much easier to handle and utilised the maximum possible diameter available.
With the appropriate curvature and coatings to the rod ends and optimal choices of glass-types, all calculated and specified by Hopkins, the image quality was transformed even with tubes of only 1mm in diameter. With a high quality 'telescope' of such small diameter the tools and illumination system could be comfortably housed within an outer tube. Once again, it was Karl Storz who produced the first of these new endoscopes as part of a long and productive partnership between the two men.[20]
Whilst there are regions of the body that will always require flexible endoscopes (principally the gastrointestinal tract), the rigid rod-lens endoscopes have such exceptional performance that they are still the preferred instrument and have enabled modern key-hole surgery.[citation needed] (Harold Hopkins was recognized and honoured for his advancement of medical-optic by the medical community worldwide. It formed a major part of the citation when he was awarded the Rumford Medal by the Royal Society in 1984.)
A typical endoscope is composed of following parts:
Besides, patients undergoing endoscopy procedure may be offered sedation in order to avoid discomfort.
Endoscopes may be used to investigate symptoms in the digestive system including nausea, vomiting, abdominal pain, difficulty swallowing, and gastrointestinal bleeding.[21] It is also used in diagnosis, most commonly by performing a biopsy to check for conditions such as anemia, bleeding, inflammation, and cancers of the digestive system. The procedure may also be used for treatment such as cauterization of a bleeding vessel, widening a narrow esophagus, clipping off a polyp or removing a foreign object.
Health care workers can use endoscopes to review the following body parts:
There are many different types of endoscopes for medical examination, so are their classification methods. Generally speaking, the following three classifications are more common:
With the development and application of robotic systems, especially surgical robotics, remote surgery has been introduced, in which the surgeon could be at a site far away from the patient. The first remote surgery was called the Lindbergh Operation.[22] And a wireless oesophageal pH measuring devices can now be placed endoscopically, to record ph trends in an area remotely.[23]
Endoscopy VR simulators
Virtual reality simulators are being developed for training doctors on various endoscopy skills.[24]
Disposable endoscopy
Disposable endoscopy is an emerging category of endoscopic instruments. Recent developments[25] have allowed the manufacture of endoscopes inexpensive enough to be used on a single patient only. It is meeting a growing demand to lessen the risk of cross contamination and hospital acquired diseases. A European consortium of the SME is working on the DUET (disposable use of endoscopy tool) project to build a disposable endoscope.[26]
Capsule endoscopy Capsule endoscopes are pill-sized imaging devices that are swallowed by a patient and then record images of the gastrointestinal tract as they pass through naturally. Images are typically retrieved via wireless data transfer to an external receiver.[27]
The endoscopic images can be combined with other image sources to provide the surgeon with additional information. For instance, the position of an anatomical structure or tumor might be shown in the endoscopic video.[28]
Image enhancement
Emerging endoscope technologies measure additional properties of light such as optical polarization,[29] optical phase,[30] and additional wavelengths of light to improve contrast.[31]
Industrial endoscopic nondestructive testing technology
The above is mainly about the application of endoscopes in medical inspection. In fact, endoscopes are also widely used in industrial field, especially in non-destructive testing and hole exploration. If internal visual inspection of pipes, boilers, cylinders, motors, reactors, heat exchangers, turbines, and other products with narrow, inaccessible cavities and/or channels is to be performed, then the endoscope is an important, if not an indispensable instrument.[32] In such applications they are commonly known as borescopes.