METHOD OF LEVELLING - COMPUTING REDUCED LEVEL USING RISE AND FALL METHOD - LCETED - LCETED Institute for Civil Engineers

Post Top Ad

Jul 23, 2021

Webp.net-resizeimage%2B%25286%2529

METHOD OF LEVELLING - COMPUTING REDUCED LEVEL USING RISE AND FALL METHOD

COMPUTING REDUCED LEVEL USING RISE AND FALL METHOD

This method consists of determining the difference of level between consecutive points by comparing each point, after the first, with that immediately preceding it. The difference between their staff readings indicates rise or fall depending on whether the staff reading at the point is smaller or greater than that at the preceding point. The reduced level of each point is then found by adding the rise too, or subtracting the fall from, the reduced level of the preceding point.

Slide1+%25288%2529


It is to be noted that the terms ‘rise’ and ‘fall’ always refer to rise or fall from the first point to the second point, second point to the third point and not conversely.


The steps involved are as follows:

1. It consists of determining the difference of levels between the consecutive points by comparing their staff readings.


2. Obtain the rise or fall by calculating the difference between the consecutive staff readings. Rise is indicated if the back sight is more than the foresight, and a fall if the back sight is less than the foresight.


3. Find out the reduced levels of each point by adding the rise too, or by subtracting the fall from, the reduced level of the preceding point.


Check: ΣBS – ΣFS = ΣRise = ΣFall - Last RL - First RL


Station

BS

IS

FS

Rise

Fall

A

0.665

 

 

 

 

B

 

0.825

 

 

0.160

C

 

2.540

 

 

1.715

D

3.200

 

0.385

2.155

 

E

1.565

 

1.400

1.800

 

F

 

2.000

 

 

0.435

G

 

 

2.450

 

0.450

 

ΣBS = 5.430; ΣFS = 4.235; ΣRise = 3.955; ΣFall = 2.760


Here also the reduced level of the benchmark is assumed as 100.00 and the back sight to the benchmark is taken. Then the staff is held at B and reading recorded as intermediate sight.

RL of B = BM – Fall

(As the intermediate sight at B is greater than the back sight at A)

Then RL of C = RL of B – Fall of C (Fall of C = IS at C – IS at B)


Now there is a change point and so the back sight and foresight are to be taken, and as the intermediate sight (i.e., 2.540) is greater than foresight (i.e., 0.385) there is a rise.

Rise = 2.540 – 0.385 = 2.155

RL of D = RL of C + Rise = 98.125 + 2.155 = 100.280


Now there is another change point and here also, as the back sight (3.200) is greater than the F.S (1.400), there is a rise.

Rise = 3.200 – 1.400 = 1.800

RL of E = RL of D + Rise = 100.280 + 1.800 + 102.080


Intermediate sight is taken with the staff at F and here as the intermediate sight (i.e., 2.000) is greater than backsight (i.e., 1.565) there is a fall.

Fall = 2.000 – 1.565 = 0.435

RL of F = RL of E – Fall = 102.080 – 0.435 = 101.645


This procedure is repeated till the last point is reached and the usual checks are applied to assess the correctness of the calculations.

Check: ΣBS – ΣFS = ΣRise – ΣFall = Last RL – First RL = 1.195


Problem-1

Given are the levels recorded in a levelling book. Complete the levels using rise and fall method.

Station

BS

IS

FS

RISE

FALL

RL

Remarks

BM

3.10

 

 

 

 

193.62

BM

1

 

2.56

 

 

 

 

 

2

 

1.07

 

 

 

 

 

3

1.92

 

3.96

 

 

 

CP

4

1.20

 

0.67

 

 

 

CP

5

 

4.24

 

 

 

 

 

6

0.22

 

1.87

 

 

 

CP

7

 

3.03

 

 

 

 

 

8

 

 

1.41

 

 

 

 

 

Solution: The levels are computed as below using rise and fall method

Station

BS

IS

FS

RISE

FALL

RL

Remarks

BM

3.10

 

 

 

 

193.62

BM

1

 

2.56

 

0.54

 

194.16

 

2

 

1.07

 

1.49

 

195.65

 

3

1.92

 

3.96

 

2.89

192.76

CP

4

1.20

 

0.67

1.25

 

194.01

CP

5

 

4.24

 

 

3.04

190.97

 

6

0.22

 

1.87

2.37

 

193.34

CP

7

 

3.03

 

 

2.81

190.53

 

8

 

 

1.41

1.62

 

192.15

 

 

Σ 6.44

 

Σ 7.91

Σ 7.27

Σ8.74

 

 

 

Check: ΣBS – ΣFS = Last RL – First RL = ΣRise – ΣFall

6.44 – 7.91 = –1.47, 192.15 – 193.62 = –1.47, 7.27 – 8.74 = –1.47

Hence checked.

 

Problem-2

Given are the levels recorded in a levelling book. Complete the levels using rise and fall method.

BS

IS

FS

RISE

FALL

RL

Remarks

3.39

 

 

 

 

23.10

BM

 

2.81

 

 

 

 

 

 

2.51

 

 

 

 

 

 

2.22

 

 

 

 

CP

2.61

 

1.88

 

 

 

 

 

2.32

 

 

 

 

 

 

1.92

 

 

 

 

 

 

 

1.54

 

 

 

 

 

Solution: The levels are computed as below using rise and fall method


BS

IS

FS

RISE

FALL

RL

Remarks

3.39

 

 

 

 

23.10

BM

 

2.81

 

0.58

 

23.68

 

 

2.51

 

0.30

 

23.98

 

 

2.22

 

0.29

 

24.27

 

2.61

 

1.88

0.34

 

24.61

CP

 

2.32

 

0.29

 

24.90

 

 

1.92

 

0.40

 

25.30

 

 

 

1.54

0.38

 

25.68

 

Σ6.00

 

Σ3.42

Σ2.58

Σ0

 

 


Check: ΣBS – ΣFS = Last RL – First RL = ΣRise – ΣFall


Σ6.00 – Σ3.42 = 2.58, 25.68 – 23.10 = 2.58, 2.58 – 0.00 = 2.58


Hence checked.


If you find 

 

This information is helpful, please share it.

 

Thanks! For reading the article.     

LCETED - "WHATSAPP GROUP"

For Instant updates Join our Whatsapp Group. Save our Whatsapp contact +919840140396 as LCETED and Send us a message “JOIN”

No comments:

Post a Comment

Post Bottom Ad