Search Results (416)

On 7 January 2025, at Beijing time, an M_w7.1 earthquake occurred in Dingri County, Shigatse, Tibet. To accurately determine the fault that caused this earthquake and understand the source mechanism, this study utilized Differential Interferometric Synthetic Aperture Radar (DInSAR) technology to process Sentinel-A data, obtaining the line-of-sight (LOS) co-seismic deformation field for this earthquake. This deformation field was used as constraint data to invert the geometric parameters and slip distribution of the fault. The co-seismic deformation field indicates that the main characteristics of the earthquake-affected area are vertical deformation and east-west extension, with maximum deformation amounts of 1.6 m and 1.0 m for the ascending and descending tracks, respectively. A Bayesian method based on sequential Monte Carlo sampling was employed to invert the position and geometric parameters of the fault, and on this basis, the slip distribution was inverted using the steepest descent method. The inversion results show that the fault has a strike of 189.2°, a dip angle of 40.6°, and is classified as a westward-dipping normal fault, with a rupture length of 20 km, a maximum slip of approximately 4.6 m, and an average slip angle of about −82.81°. This indicates that the earthquake predominantly involved normal faulting with a small amount of left–lateral strike–slip, corresponding to a moment magnitude of M_w7.1, suggesting that the fault responsible for the earthquake was the northern segment of the DMCF (Deng Me Cuo Fault). The slip distribution results obtained from the finite fault model inversion show that this earthquake led to a significant increase in Coulomb stress at both ends of the fault and in the northeastern–southwestern region, with stress loading far exceeding the earthquake triggering threshold of 0.03 MPa. Through analysis, we believe that this Dingri earthquake occurred at the intersection of a “Y”-shaped structural feature where stress concentration is likely, which may be a primary reason for the frequent occurrence of moderate to strong earthquakes in this area. Full article

Lutan-1 is the first L-band SAR satellite launched by China with the core mission of geohazard monitoring, but few studies have been conducted to apply it in the field of earthquakes. In this paper, the capability of Lutan-1 data in coseismic deformation analysis and seismogenic fault parameter inversion was discussed by taking the 2023 Mw6.0 Jishishan earthquake as an example. Firstly, we utilized Lutan-1 data to acquire the coseismic deformation field of the Jishishan earthquake. Subsequently, the seismogenic fault parameter and slip distribution were inverted using both uniform slip and distributed slip models. Finally, a comprehensive comparison was conducted with Sentinel-1 data in terms of the coseismic deformation field, seismic source parameters, and coherence. The comparative results demonstrate that the coseismic deformation and seismogenic fault parameter inversion derived from Lutan-1 data are consistent with those obtained from Sentinel-1 data. Moreover, Lutan-1 data exhibit superior image quality and better coherence, confirming the effectiveness and superiority of Lutan-1 data for coseismic deformation and seismogenic fault analysis. This study provides a theoretical foundation for the application of Lutan-1 in the field of earthquake disaster monitoring. Full article

Soil moisture content is typically measured in situ using various instruments; however, due to the heterogeneous nature of soil, these measurements are only suitable at a very local scale. To overcome this limitation, earth observation satellite remote sensing data, particularly through the inversion of the closure phases of interferometric synthetic aperture radar (InSAR) observations, enables the determination of soil moisture content at regional to global scales. Here, we present, for the first time, a regional-scale study of soil moisture determined from remote sensing observations of Malawi, specifically, two areas of interest capturing arable and national parklands in Kasungu and Liwonde. We invert the closure phases of InSAR acquisitions from Sentinel-1 between 1 January 2023 and 31 May 2024 to measure the soil moisture content in the same time range. We show that soil moisture content is heavily influenced by local precipitation and highlight common trends in soil moisture in both regions. We suggest the difference in soil moisture observed inside and outside the national parks is a result of different overlying vegetation and conservation agriculture practices during the maize crop cycle in Malawi. Our results show the effectiveness and suitability of remote sensing techniques to monitor soil moisture at a regional scale. The upcoming additions to ESA’s fleet of earth observation satellites, in particular Sentinel-1C, will allow for higher-time-resolution soil moisture measurements. Full article

Orientation is an important parameter to identify the working status of a parabolic antenna. Polarimetric inverse synthetic aperture radar (Pol-ISAR) is an effective approach to sense the parabolic antenna, but the imaging process may be seriously deteriorated by the propagation effect under the rainfall condition. This paper proposes a method to compensate for the propagation effect of rainfall for accurately estimating the orientation parameter of a parabolic antenna from Pol-ISAR images. Numerical simulations show that the impact of the propagation effect for the Pol-ISAR imaging of a parabolic antenna is serious, but it can be well compensated for by the method proposed in this paper. Full article

Inverse Synthetic Aperture Radar (ISAR) images are extensively used in Radar Automatic Target Recognition (RATR) for non-cooperative targets. However, acquiring training samples for all target categories is challenging. Recognizing target classes without training samples is called Zero-Shot Learning (ZSL). When ZSL involves multiple modalities, it becomes Multi-modal Zero-Shot Learning (MZSL). To achieve MZSL, a framework is proposed for generating ISAR images with optical image aiding. The process begins by extracting edges from optical images to capture the structure of ship targets. These extracted edges are used to estimate the potential locations of the target’s scattering centers. Using the Geometric Theory of Diffraction (GTD)-based scattering center model, the edges’ ISAR images are generated from the scattering centers. Next, a mapping is established between the edges’ ISAR images and the actual ISAR images. Neighbor-Adapted Local Linear Embedding (NALLE) generates pseudo-ISAR images for the unseen classes by combining the edges’ ISAR images with the actual ISAR images from the seen classes. Finally, these pseudo-ISAR images serve as training samples, enabling the recognition of test samples. In contrast to the network-based approaches, this method requires only a limited number of training samples. Experiments based on simulated and measured data validate the effectiveness. Full article

Inverse synthetic aperture radar (ISAR) super-resolution imaging technology is widely applied in space target imaging. However, the performance limits of super-resolution imaging algorithms remain largely unexplored. Our work addresses this gap by deriving mathematical expressions for the upper and lower bounds of cross-range resolution in ISAR imaging based on the computational resolution limit (CRL) theory for line spectrum reconstruction. Leveraging these explicit expressions, we first explore influencing factors of these bounds, including the traditional Rayleigh limit, number of scatterers, and peak signal-to-noise ratio (PSNR) of the scatterers. Then, we elucidate the minimum resource requirements in ISAR imaging imposed by CRL theory to meet the desired cross-range resolution, without which studying super-resolution algorithms becomes unnecessary in practice. Furthermore, we analyze the tradeoffs between the cumulative rotation angle, radar transmit energy, and other factors that contribute to optimizing the resolution. Simulations are conducted to demonstrate these tradeoffs across various ISAR imaging scenarios, revealing their high dependence on specific imaging targets. Full article

In the field of slope landslide prevention and monitoring in open-pit mines, addressing the lag issues associated with the traditional GNSS inverse-velocity method, this study introduces a novel strategy that integrates high-spatiotemporal-resolution monitoring data from ArcSAR with a time log model for prediction. The key findings include the following: (1) This strategy utilizes the normal distribution characteristics of deformation velocities to set confidence intervals, accurately identifying the starting point of accelerated deformation. (2) Coupled with coordinate transformation, the time logarithm prediction method was constructed, unifying the units of measurement and resolving convergence issues in data fitting. (3) Empirical research conducted at the Kambove open-pit mine in the Democratic Republic of the Congo demonstrates that this method successfully predicts landslide times four hours in advance, with an error margin of only 0.18 h. This innovation offers robust technical support for slope landslide prevention and control in open-pit mines, enhancing safety standards and mitigating disaster losses. Full article

The quality of ISAR (Inverse Synthetic Aperture Radar) images has a significant impact on the detection and recognition of targets. Therefore, ISAR image quality assessment is a fundamental prerequisite and primary link in the utilization of ISAR images. Previous ISAR image quality assessment methods typically extract hand-crafted features or use simple multi-layer networks to extract local features. Hand-crafted features and local features from networks usually lack the global information of ISAR images. Furthermore, most deep neural networks obtain feature representations by abridging the prediction quality score and the ground truth, neglecting to explore the strong correlations between features and quality scores in the stage of feature extraction. This study proposes a Gramin Transformer to explore the similarity and diversity of features extracted from different images, thus obtaining features containing quality-related information. The Gramin matrix of features is computed to obtain the score token through the self-attention layer. It prompts the network to learn more discriminative features, which are closely associated with quality scores. Despite the Transformer architecture’s ability to extract global information, the Channel Attention Block (CAB) can capture complementary information from different channels in an image, aggregating and mining information from these channels to provide a more comprehensive evaluation of ISAR images. ISAR images are formed from target scattering points with a background containing substantial silent noise, and the Inter-Region Attention Block (IRAB) is utilized to extract local scattering point features, which decide the clarity of target. In addition, extensive experiments are conducted on the ISAR image dataset (including space stations, ships, aircraft, etc.). The evaluation results of our method on the dataset are significantly superior to those of traditional feature extraction methods and existing image quality assessment methods. Full article

Lakes are a crucial component of inland water bodies, and changes in their water levels serve as key indicators of global climate change. Traditional methods of lake water level monitoring rely heavily on hydrological stations, but there are problems such as regional representativeness, data stability, and high maintenance costs. The satellite altimeter is an essential tool in lake research, with the Synthetic Aperture Radar (SAR) altimeter offering a high spatial resolution. This enables precise and quantitative observations of lake water levels on a large scale. In this study, we used Sentinel-3A SAR Radar Altimeter (SRAL) data to establish a more reasonable lake height inversion algorithm for satellite-derived lake heights. Subsequently, using this technology, a systematic analysis study was conducted with Qinghai Lake as the case study area. By employing regional filtering, threshold filtering, and altimeter range filtering techniques, we obtained effective satellite altimeter height measurements of the lake surface height. To enhance the accuracy of the data, we combined these measurements with GPS buoy-based geoid data from Qinghai Lake, normalizing lake surface height data from different periods and locations to a fixed reference point. A dataset based on SAR altimeter data was then constructed to track lake surface height changes in Qinghai Lake. Using data from the Sentinel-3A altimeter’s 067 pass over Qinghai Lake, which has spanned 96 cycles since its launch in 2016, we analyzed over seven years of lake surface height variations. The results show that the lake surface height exhibits distinct seasonal patterns, peaking in September and October and reaching its lowest levels in April and May. From 2016 to 2023, Qinghai Lake showed a general upward trend, with an increase of 2.41 m in lake surface height, corresponding to a rate of 30.0 cm per year. Specifically, from 2016 to 2020, the lake surface height rose at a rate of 47.2 cm per year, while from 2020 to 2022, the height remained relatively stable. Full article

Inverse Synthetic Aperture Radar (ISAR) images of space targets and their key components are very important. However, this method suffers from numerous drawbacks, including a low Signal-to-Noise Ratio (SNR), blurred edges, significant variations in scattering intensity, and limited data availability, all of which constrain its recognition capabilities. The terahertz (THz) regime has reflected excellent capacity for space detection in terms of showing the details of target structures. However, in ISAR images, as the observation aperture moves, the imaging features of the extended structures (ESs) undergo significant changes, posing challenges to the subsequent recognition performance. In this paper, a parabolic antenna is taken as the research object. An innovative approach for identifying this component is proposed by using the advantages of the Component Prior and Imaging Characteristics (CPICs) effectively. In order to tackle the challenges associated with component identification in satellite ISAR imagery, this study employs the Improved-YOLOv8 model, which was developed by incorporating the YOLOv8 algorithm, an adaptive detection head known as the Dynamic head (Dyhead) that utilizes an attention mechanism, and a regression box loss function called Wise Intersection over Union (WIoU), which addresses the issue of varying sample difficulty. After being trained on the simulated dataset, the model demonstrated a considerable enhancement in detection accuracy over the five base models, reaching an mAP50 of 0.935 and an mAP50-95 of 0.520. Compared with YOLOv8n, it improved by 0.192 and 0.076 in mAP50 and mAP50-95, respectively. Ultimately, the effectiveness of the suggested method is confirmed through the execution of comprehensive simulations and anechoic chamber tests. Full article

This study addresses the issue of atmospheric delay correction for the rational polynomial coefficient (RPC) model associated with spaceborne synthetic aperture radar (SAR) imagery under conditions lacking ephemeris data, proposing a novel approach to enhance the geometric positioning accuracy of RPC models. A satellite position inversion method based on the vector-autonomous intersection technique was developed, incorporating ionospheric delay and neutral atmospheric delay models to derive atmospheric delay errors. Additionally, an RPC model reconstruction approach, which integrates atmospheric correction, is proposed. Validation experiments using GF-3 satellite imagery demonstrated that the atmospheric delay values obtained by this method differed by only 0.0001 m from those derived using the traditional ephemeris-based approach, a negligible difference. The method also exhibited high robustness in long-strip imagery. The reconstructed RPC parameters improved image-space accuracy by 18–44% and object-space accuracy by 19–32%. The results indicate that this approach can fully replace traditional ephemeris-based methods for atmospheric delay extraction under ephemeris-free conditions, significantly enhancing the geometric positioning accuracy of SAR imagery RPC models, with substantial application value and development potential. Full article

Feature point detection in inverse synthetic aperture radar (ISAR) images of space targets is the foundation for tasks such as analyzing space target motion intent and predicting on-orbit status. Traditional feature point detection methods perform poorly when confronted with the low texture and uneven brightness characteristics of ISAR images. Due to the nonlinear mapping capabilities, neural networks can effectively learn features from ISAR images of space targets, providing new ideas for feature point detection. However, the scarcity of labeled ISAR image data for space targets presents a challenge for research. To address the issue, this paper introduces a self-supervised feature point detection method (SFPD), which can accurately detect the positions of feature points in ISAR images of space targets without true feature point positions during the training process. Firstly, this paper simulates an ISAR primitive dataset and uses it to train the proposed basic feature point detection model. Subsequently, the basic feature point detection model and affine transformation are utilized to label pseudo-ground truth for ISAR images of space targets. Eventually, the labeled ISAR image dataset is used to train SFPD. Therefore, SFPD can be trained without requiring ground truth for the ISAR image dataset. The experiments demonstrate that SFPD has better performance in feature point detection and feature point matching than usual algorithms. Full article

In the context of 3D geometric reconstruction from sequential inverse synthetic aperture radar (ISAR) images, the accurate scatterer trajectory association is a critical step. Aiming at the above problem, an enhanced scatterer trajectory association method is proposed by designing a modified label Gaussian mixture probability hypothesis density (ML-GM-PHD) filtering algorithm. The algorithm commences by constructing a general motion model for scatterers across sequential ISAR images, followed by an in-depth analysis of their motion characteristics. Subsequently, the actual projected positions and measurements of the scattering centers of the observed target are treated as random finite sets, which allows us to reformulate the scatterer trajectory association into a maximum a posteriori (MAP) estimation problem. After that, a ML-GM-PHD filtering algorithm is proposed to realize the scatterer trajectory association. Furthermore, the proposed method is applied to ISAR images in both the forward and reverse directions, enabling the fusion of trajectories from opposing directions to bolster the completeness of the scatterer trajectories. Finally, the factorization method is performed on the scatterer trajectory matrix to implement the 3D geometry reconstruction of the scattering centers in the observed target. Experimental results based on random points and electromagnetic data verify the effectiveness and performance priority of the proposed algorithm. Full article

Coal is the main mineral resource, but over-exploitation will cause a series of geological disasters. Interferometric synthetic aperture radar (InSAR) technology provides a superior monitoring method to compensate for the inadequacy of traditional measurements for mine surface deformation monitoring. In this study, the whole process of mining a working face in Huaibei Mining District, Anhui Province, is taken as the object of study. The ALOS PALSAR satellite radar image data and ground measurements were acquired, and the ISK-DPIM-InSAR deformation monitoring model with the dynamic probabilistic integral model (DPIM) was proposed by combining the probabilistic integral method (PIM) and the improved segmented Knothe time function (ISK). The ISK-DPIM-InSAR model constructs the inversion equations of InSAR line-of-sight deformation, north–south and east–west horizontal movement deformation, vertical deformation, inverts the optimal values of the predicted parameters of the workforce through the particle swarm algorithm, and substitutes it into the ISK-DPIM-InSAR model for predicting the three-dimensional dynamic deformation of a mining face. Simulated workface experiments determined the feasibility of the model, and by comparing the level observation results of the working face, it is confirmed that the ISK-DPIM-InSAR model can accurately monitor the three-dimensional deformation of the surface in the mining area. Full article

The inversion of ocean currents is a significant challenge and area of interest in ocean remote sensing. Spaceborne along-track interferometric synthetic aperture radar (ATI-SAR) has several advantages and benefits, including precise observations, extensive swath coverage, and high resolution. However, a limited number of spaceborne interferometric synthetic aperture radar (InSAR) systems are operating in orbit. Among these, the along-track baseline length is generally suboptimal, resulting in low inversion accuracy and difficulty in achieving operational stability. One of the approaches involves employing lower-frequency bands such as the L band to increase the baseline length to achieve the optimal baseline for a satellite formation. The LuTan-1 mission, the world’s first L-band distributed spaceborne InSAR system, was successfully launched on 27 February 2022. L-band distributed formation operation provides insight into the development of future spaceborne ATI systems with application to new exploration regimes and under optimal baseline conditions. There are two novel aspects of this investigation: (1) We described the ocean current inversion process and results based on LuTan-1 SAR data for the first time. (2) A cross-track baseline component phase removal method based on parameterized modeling was proposed for distributed InSAR systems. Both qualitative and quantitative comparisons validated the effectiveness and accuracy of the inversion results. Full article