Search Results (588)

A battery-operated biomedical wearable device gradually assists in clinical tasks to monitor patients’ health states regarding early diagnosis and detection. This paper presents the development of a self-powered portable electronic module by integrating an onboard energy-harvesting facility for electrocardiogram (ECG) signal processing and personalized health monitoring. The developed electronic module provides a customizable approach to power the device using a lithium-ion battery, a series of silicon photodiode arrays, and a solar panel. The new architecture and techniques offered by the developed method include an analog front-end unit, a signal processing unit, and a battery management unit for the acquiring and processing of real-time ECG signals. The dynamic multi-level wavelet packet decomposition framework has been used and applied to an ECG signal to extract the desired features by removing overlapped and repeated samples from an ECG signal. Further, a random forest with deep decision tree (RFDDT) architecture has been designed for offline ECG signal classification, and experimental results provide the highest accuracy of 99.72%. One assesses the custom-developed sensor by comparing its data with those of conventional biosensors. The onboard energy-harvesting and battery management circuits are designed with a BQ25505 microprocessor with the support of silicon photodiodes and solar cells which detect the ambient light variations and provide a maximum of 4.2 V supply to enable the continuous operation of an entire module. The measurements conducted on each unit of the proposed method demonstrate that the proposed signal-processing method significantly reduces the overlapping samples from the raw ECG data and the timing requirement criteria for personalized and wearable health monitoring. Also, it improves temporal requirements for ECG data processing while achieving excellent classification performance at a low computing cost. Full article

Currently, silicon is the most often utilized material for photovoltaic cell manufacturing, as it has the potential to convert solar energy directly into electricity. The silicon used in photovoltaic solutions must be highly pure. Large amounts of power, raw materials, and fossil fuels are consumed in the production process. Post-consumer treatment of polymers, materials, and components also requires energy and matter. These processes have a significant influence on the environment. As a result, the primary purpose of this article is to evaluate the influence of a photovoltaic power plant’s material and component life cycle on ecosystem quality. The research focuses on an actual photovoltaic power plant with a capacity of 2 MW located in northern Poland. According to the findings, photovoltaic modules are the part that has the most negative environmental impact, since their manufacturing requires a substantial amount of materials and energy (primarily from conventional sources). Post-consumer management, in the form of recycling after use, would provide major environmental advantages and reduce detrimental environmental consequences throughout the course of the solar power plant’s full life cycle. Full article

The interest in alternative energy sources, including the use of solar radiation energy, is growing year by year. Currently, the most frequently installed photovoltaic modules are made of single-crystalline silicon solar cells (sc-Si). However, one of the latest solutions are perovskite solar cells (PSC), which are considered the future of photovoltaics. Therefore, the main objective of this research was to assess the environmental impact of the construction materials of monocrystalline and perovskite photovoltaic power plants toward their sustainable development. The research object was the construction materials and components of two 1 MW photovoltaic power plants: one based on monocrystalline modules and the other on perovskite modules. The life cycle assessment (LCA) method was used for the analyses. The IMPACT World+, IPCC and CED models were used in it. The analyses were performed separately for five sets of elements: support structures, photovoltaic panels, inverter stations, electrical installations and transformers. Two post-consumer management scenarios were adopted: storage and recycling. The life cycle of a photovoltaic power plant based on photovoltaic modules made of perovskite cells is characterized by a smaller negative impact on the environment compared to traditional power plants with monocrystalline silicon modules. Perovskites, as a construction material of photovoltaic modules, fit better into the main assumptions of sustainable development compared to cells made of monocrystalline silicon. However, it is necessary to conduct further work which aims at reducing energy and material consumption in the life cycles of photovoltaic power plants. Full article

High electrical conductivity and optical transparency make graphene a suitable candidate for photovoltaic-based power systems. In this study, we present the design and fabrication of an array of graphene-based Schottky junction solar cells. Using mainstream semiconductor manufacturing methods, we produced 96 solar cells from a single 100 mm diameter silicon wafer that was precoated with an oxide layer. The fabrication process involves removing the oxide layer over a select region, depositing metal contacts on both the oxide and bare silicon regions, and transferring large-area graphene onto the exposed silicon to create the photovoltaic interface. A single solar cell can provide up to 160 μA of short-circuit current and up to 0.42 V of open-circuit voltage. A series of solar cells are wired to recharge a 3 V battery intermittently, while the battery continuously powers a device. The solar cells and rechargeable battery together form a power system for any 3-volt low-power application. Full article

In order to reduce manufacturing costs, the design of silicon-based solar modules is changing from a super-multi-busbar design to a zero-busbar (0BB) design. In this study, two different 0BB technologies based on heterojunction with intrinsic thin-layer solar cells—conventional soldering, and Integrated Film Covering (IFC)—were investigated. IFC-based 0BB technology was found to have a lower contact resistance, which well matches the theoretical calculations and module power testing results. To further measure module reliability, a series of tests on solders and silver pastes were carried out. The results show that Sn43Pb43Bi14 solder is more suitable for soldering-based 0BB technology, whereas Sn32Pb42Bi26 solder is more suitable for IFC-based technology. Additionally, silver paste, which is used for solder ribbon contact areas (SRCAs), is suitable for soldering-based 0BB technology. When Ag@Cu paste is used in SRCAs with IFC-based 0BB technology, a reliable connection can also be achieved. After optimization, modules using both techniques were subjected to and passed lifetime tests, including the thermal cycling, humidity freeze, and hot-spot tests required in IEC standards, as well as more rigorous tests such as thermal–dynamic and thermal–static mechanical loading. The results show that the two technologies have great potential for future mass production. Full article

The article considers the problem of an influence of partial shading on the characteristics of photovoltaic modules (PV modules). Different manners of connections of silicon solar cells contained in such modules are considered, e.g., classical PV modules (I and II generation of modules) and modules made using half-cut technology (III generation of modules). A model of PV modules was proposed. This model has the form of a network for the SPICE program and takes into account the influence of partial shading of the PV module caused by clouds or terrain and architectural obstacles on its current and voltage. The form of the model was described, and the DC characteristics of the considered classical and half-cut modules, calculated using the formulated model, were compared to the measurement results under different shading conditions. Some calculations using the proposed model were performed for different methods to connect solar cells in PV modules. The obtained results were discussed. Full article

Organic/silicon hybrid solar cells have attracted much interest due to their cheap fabrication process and simple device structure. A category of organic substances, Dibenzothiophene–Spirobifluorene–Dithiophene (DBBT-mTPA-DBT), comprises dibenzo [d,b] thiophene and 3-(3-methoxyphenyl)-6-(4-methoxyphenyl)-9H-Carbazole, which function as electron donors. In contrast, methanone is an electron acceptor, with an ∆Est of 3.19 eV. This work focused on hybrid solar cells based on the guest–host phenomena of DBBT-mTPA-DBT and CBP. Using a Si/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) hybrid solar cell with an ultra-thin Dibenzothiophene–Spirobifluorene–Dithienothiophene (DBBT-mTPA-DBT) interlayer between Si and Al led to a PCE of 17.5 ± 2.5%. The DBBT-mTPA-DBT interlayer substantially improved the Si/Al interface, reducing contact resistance from 6.5 × 10⁻¹ Ω·cm² to 3.5 × 10⁻² Ω·cm². This improvement increases electron transport efficiency from silicon to aluminum and reduces carrier recombination. The solar cell containing the DBBT-mTPA-DBT/Al double-layer cathode shows a 10.85% increase in power conversion efficiency relative to the standard Al cathode device. Full article

The development of new encapsulating coatings for flexible solar cells (SCs) can help address the complex problem of the short lifespan of these devices, as well as optimize the technological process of their production. In this study, new laminate-type protective composite coatings were prepared using a silicon oxynitride thin-film matrix obtained by curing the pre-ceramic polymer perhydropolysilazane (PHPS) through two low-temperature methods: (i) thermal annealing at 180 °C and (ii) exposure to UV radiation at wavelengths of 185 and 254 nm. Single-walled carbon nanotubes (SWCNTs) were used as fillers via dry transfer, facilitating their horizontal orientation within the matrix. The optical, adhesive, and structural properties of the matrix films and SiO_xN_y/SWCNT composite coatings, along with their long-term stability, were studied using Fourier transform infrared spectroscopy (FTIR), UV-Vis spectroscopy, HR-SEM, spectral ellipsometry, and a progressive-load scratch test. In this work, the optical constants of PHPS-derived films were systematically studied for the first time. An antireflection effect was observed in the composites revealing their two-component nature associated with (i) the refractive index of the SiO_xN_y matrix film and (ii) the embedding of a SWCNT filler into the SiO_xN_y matrix. The curing method of PHPS was shown to significantly affect the resulting properties of the films. In addition to being used as protective multifunctional coatings for SCs, both SiO_xN_y/SWCNT composites and SiO_xN_y matrix films also function as broadband optical antireflective coatings. Furthermore, due to the very low friction coefficients observed in the mechanical tests, they show potential as scratch resistant coatings for mechanical applications. Full article

In this work, we report a detailed scheme of computational optimization of solar cell structures and parameters using PC1D and AFORS-HET codes. Each parameter’s influence on the properties of the components of heterojunction silicon-based solar cells (HIT) has been thoroughly examined. The proposed approach follows a stringent sequence of steps to optimize various parameters of the studied HITs. Furthermore, we have revealed the effects of the metal-semiconductor contact, and a model of a photocell with an ohmic contact and a Schottky contact has been simulated. The optimal model of HIT for available materials has been proposed and fabricated based on the results of these simulations. A comparison of predicted and measured performance unequivocally demonstrates the efficiency of the proposed scheme in developing silicon-based HITs, providing reassurance about its practical application. Full article

Silicon nitride is a commonly used material for ceramic applications and in the fabrication processes of integrated circuits (ICs). It has also increased in interest from the scientific community for use as a functional coating due to its physical, mechanical, electrical, and optoelectronic properties. In particular, silicon-rich silicon nitride (SRSN) has been considered in the photovoltaic industry as a down-conversion film for solar cells. In this work, SRSN films have been obtained by the Low-Pressure Chemical Vapor Deposition (LPCVD) technique at low to moderate deposition temperatures with a variation in the precursor gas pressure ratio. The SRSN films showed a wide photoluminescence (PL) in the visible region (without a high-deposition temperature or annealing process) and suitable optical properties (refractive index and absorption in the UV) to be used as photoluminescent coating on silicon solar cells. The absence of high-deposition temperatures could preserve the original structure of silicon solar cells, once the SRSN layer was applied. In addition, control of the reactive gas pressure ratio and deposition temperature showed an influence on the refractive index, the surface roughness, and the PL emission. Full article

Tandem solar cells have the potential to be more efficient than the Shockley–Queisser limit imposed on single junction cells. In this study, optical and electrical modeling based on experimental data were used to investigate the possibility of boosting the performance of kesterite/c-Si tandem solar cells by inserting an alternative nontoxic TiO₂ buffer layer into the kesterite top subcell. First, with SCAPS-1D simulation, we determined the data reported for the best kesterite (CZTS (Eg = 1.5 eV)) device in the experiments to be used as a simulation baseline. After obtaining metric parameters close to those reported, the influence on the optoelectronic characteristics of replacing CdS with a TiO₂ buffer layer was studied and analyzed. Different top subcell absorbers (CZTS0.8Se0.2 (Eg = 1.4 eV), CZTS (Eg = 1.5 eV), CZTS (Eg = 1.6 eV), and CZT0.6Ge0.4S (Eg = 1.7 eV)) with different thicknesses were investigated under AM1.5 illumination. Then, to achieve current matching conditions, the c-Si bottom subcell, with an efficiency at the level of commercially available subcells (19%), was simulated using various top subcells transmitting light calculated using the transfer matrix method (TMM) for optical modeling. Adding TiO₂ significantly enhanced the electrical and optical performance of the kesterite top subcell due to the decrease in parasitic light absorption and heterojunction interface recombination. The best tandem device with a TiO₂ buffer layer for the top subcell with an optimum bandgap equal to 1.7 eV (CZT0.6Ge0.4S4) and a thickness of 0.8 µm achieved an efficiency of approximately 20%. These findings revealed that using a TiO₂ buffer layer is a promising way to improve the performance of kesterite/Si tandem solar cells in the future. However, important optical and electrical breakthroughs are needed to make kesterite materials viable for tandem applications. Full article

Unlike current silicon-based photovoltaic technology, the development of last-generation thin-film solar cells has been marked by groundbreaking advancements in new materials and novel structures to increase performance and lower costs. However, physically building each new proposal to evaluate the device’s efficiency can involve unnecessary effort and time. Numerical simulation tools provide a solution by allowing researchers to predict and optimize solar cell performance without physical testing. This paper reviews thirteen of the main numerical simulation tools for thin-film solar cells, including SCAPS, AMPS, AFORS-HET, ASPIN3, GPVDM, SESAME, SILVACO, SENTAURUS, and ADEPT. This review evaluates each tool’s features, modeling methods, numerical approaches, and application contexts. The findings reveal notable differences in material modeling, numerical accuracy, cost, and accessibility among the tools. Each tool’s strengths and limitations in simulating thin-film solar cells are highlighted. This study emphasizes the necessity of selecting suitable simulation tools based on specific research requirements. It provides a comparative analysis to assist researchers in choosing the most effective software for optimizing thin-film solar cells, contributing to advancements in photovoltaic technology. Full article

Perovskite solar cells (PSCs) are gaining prominence in the photovoltaic industry due to their exceptional photoelectric performance and low manufacturing costs, achieving a significant power conversion efficiency of 26.4%, which closely rivals that of silicon solar cells. Despite substantial advancements, the effective area of high-efficiency PSCs is typically limited to about 0.1 cm² in laboratory settings, with efficiency decreasing as the area increases. The limitation poses a major obstacle to commercialization, as large-area, high-quality perovskite films are crucial for commercial applications. This paper reviews current techniques for producing large-area perovskites, focusing on slot-die coating, a method that has attracted attention for its revolutionary potential in PSC manufacturing. Slot-die coating allows for precise control over film thickness and is compatible with roll-to-roll systems, making it suitable for large-scale applications. The paper systematically outlines the characteristics of slot-die coating, along with its advantages and disadvantages in commercial applications, suggests corresponding optimization strategies, and discusses future development directions to enhance the scalability and efficiency of PSCs, paving the way for broader commercial deployment. Full article

The rapid deployment of solar photovoltaic (PV) systems underscores their potential as vital clean energy solutions with reduced carbon emissions and increasingly competitive installation costs. This review examines PV waste management from a sustainable perspective, focusing on environmental impacts and technological advancements. Various solar cell technologies, including crystalline silicon, thin-film, and emerging third-generation cells like perovskite and organic photovoltaics, are analyzed for their life cycle and environmental effects. Effective disposal and recycling methods, such as physical separation and thermal and chemical treatments, are critically evaluated to mitigate ecological harm. The study highlights the need for improved recycling processes and sustainable practices to enhance the environmental benefits of PV systems. Future solutions call for better recycling techniques, increased efficiency in renewable materials, and comprehensive life cycle assessments to support the global transition to sustainable energy. This review aims to foster the integration of sustainable practices in the renewable energy sector, ensuring that PV systems contribute to a cleaner and more sustainable future. Full article

This study investigates the process of using multi-walled carbon nanotube (MWCNT) coatings to enhance lamp heating temperatures for solar thermal absorption applications. The primary focus is studying the effects of the self-organized honeycomb structures of CNTs formed on silicon substrates on different cell area ratios (CARs). The drop-casting process was used to develop honeycomb-structured MWCNT-coated absorbers with varying CAR values ranging from ~60% to 17%. The optical properties were investigated within the visible (400–800 nm) and near-infrared (934–1651 nm) wavelength ranges. Although fully coated MWCNT absorbers showed the lowest reflectance, honeycomb structures with a ~17% CAR achieved high-temperature absorption. These structures maintained 8.4% reflectance at 550 nm, but their infrared reflection dramatically increased to 80.5% at 1321 nm. The solar thermal performance was assessed throughout a range of irradiance intensities, from 0.04 W/cm² to 0.39 W/cm². The honeycomb structure with a ~17% CAR value consistently performed better than the other structures by reaching the highest absorption temperatures (ranging from 52.5 °C to 285.5 °C) across all measured intensities. A direct correlation was observed between the reflection ratio (visible: 550 nm/infrared: 1321 nm) and the temperature absorption efficiency, where lower reflection ratios were associated with higher temperature absorption. This study highlights the significant potential for the large-scale production of cost-effective solar thermal absorbers through the application of optimized honeycomb-structured absorbers coated with MWCNTs. These contributions enhance solar energy efficiency for applications in water heating and purification, thereby promoting sustainable development. Full article