MS1310-4813 Sub-G wireless module
Sub-G Module Descriptions:
The MS1310 series modules are ultra-low power and based on the high performance Texas InstrumentsTM CC1310 that is part of the SimpleLinkTM MCU platform. The platform consists of Wi-Fi® , Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee® , Thread, and host MCUs. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set.
The CC1310 device combines a flexible, very low power RF transceiver with a powerful 48-MHz Arm Cortex® -M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex® -M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility.
Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex® -M3) can maximize sleep time. The MS1310 series module support OTA (Over the Air Update) function.
Variants
MSxxxx-ABCC
MSxxxx=Main Chip | A= Main Chip package size | B= Supported Frequency Band | CC= Antenna form factor |
xxxx=1310; TI CC1310 Chip | a=4; 4x4mm Chip Size | b=8; 800/900Mhz | cc=13; uFLconnector |
xxxx=1312; TI CC1312 Chip | T.B.D | T.B.D | T.B.D |
For further information about chip specification, please refer to the following links.
Pin Configuration
Pin | Symbol | Type | Description |
1 | GND | Power | Ground |
2 | |||
3 | |||
4 | X32K_Q1 | Analog I/O | 32KHz crystal/oscillator pin1 |
5 | X32K_Q2 | Analog I/O | 32KHz crystal/oscillator pin2 |
6 | DIO9 | Digital/Analog I/O | GPIO, Sensor Controller, analog |
7 | DIO8 | Digital/Analog I/O | GPIO, Sensor Controller, analog |
8 | VDDS | Power | Main power supply |
9 | GND | Power | Ground |
10 | |||
11 | DIO7 | Digital/Analog I/O | GPIO, Sensor Controller, analog |
12 | DIO6 | Digital/Analog I/O | GPIO, Sensor Controller, analog |
13 | DIO5 | Digital/Analog I/O | GPIO, Sensor Controller, analog |
14 | RESET_N | Digital Input | Reset, active low, No internal pullup. |
15 | GND | Power | Ground |
16 | DIO4 | Digital I/O | GPIO, high drive capability, JTAG_TDI |
17 | DIO2 | Digital I/O | GPIO, Sensor Controller, high drive capability, TXD |
18 | JTAG_TCKC | Digital I/O | JTAG TCKC |
19 | JTAG_TMSC | Digital I/O | JTAG TMSC |
20 | DIO1 | Digital I/O | GPIO, Sensor Controller, high drive capability, RXD |
21 | DIO3 | Digital I/O | GPIO, high drive capability, JTAG_TDO |
22 | DIO0 | Digital I/O | GPIO, Sensor Controller, high drive capability |
23 | GND | Power | Ground |
24 | Ant | RF | External RF antenna port |