H-Bridge Driver Click based on a H-Bridge gate driver with charge pump and high/low-side gate drive channels

Published: 12/07/2021 | Post categories: Click boards

| Views:1273

H-Bridge Driver Click based on a H-Bridge gate driver with charge pump and high/low-side gate drive channels

Achieve control of DC motors and other bipolar loads with the MC33883

 

H-Bridge Driver Click is a compact add-on board that contains an H-bridge gate driver, also known as a full-bridge pre-driver. This board features the MC33883, an H-Bridge gate driver with an integrated charge pump and independent high and low side gate drive channels from NXP Semiconductors. The gate driver channels are independently controlled by four separate input pins, allowing the device to be optionally configured as two independent high side gate drivers and two independent low side gate drivers. Gate driver outputs can source and sink up to 1.0A peak current pulses, permitting large gate-charge MOSFETs to be driven and/or high pulse-width modulation (PWM) frequencies to be utilized.

This Click board™ is suitable for automotive engine applications (electric pumps), energy storage systems (ESS), uninterruptible power supply (UPS), and more.

For more information, visit the H-Bridge Driver Click product page.

 

Your Mikroe