Is Miracle Propress Tool Better Than Solder and Other Propress Tools?
The answer is Yes! My confidence is coming from the following reasons:
Miracle propress tool is specially designed for no welding connection for different material pipes. Compared with solder connection, Miracle propress tool doesn’t need fire, no need very much experienced, no need the complicated procedure, just a few seconds to finish the connection. Miracle propress tool is much better than solder by saving cost, saving time, and protecting users.
Miracle propress tool is smaller in size, light in weight, very easy to carry when you go out to do repair work or installation. Miracle propress tool uses together with connectors that have better design and quality and provide you a much lower leakage rate and longer service life. What’s more, Miracle propress tool has a better price.
Miracle Manual Propress Tool, Born for your Safer Installation
When new things are born, there are always exiting doubts: is it safe to use a manual propress tool to replace welding? The answer is Yes. Miracle propress copper tool is not providing the safer connection, but also the faster connection, along with the propress fittings. I’ll show you what kind of tests we do for fittings to ensure a good sealing function in the following:
Blasting Test
The blasting pressure is 35MPA, the working pressure can be 5-7MPA, so it can be used in many systems whose pressure is in this range.
Cold and Hot Alternate Test
Miracle tests the fittings under the temperature -40~+150°C in 4 hours, so make sure it can work well in no matter high or low-temperature environments.
Vibration Test
We test the propress copper fitting under 50hz, and do the vibration 100,000 times, all this ensures the system won’t leak under tough environments.
Salt Fog Test
Miracle does the salt fog test for 500hours, and the test result shows the sealing is great.
The above tests prove that with Miracle manual propress tool, sealing liquid and manual copper tool fittings are trustworthy, as long as you crimp it in the right ways.
- Copper Fitting
- Other Fittings
- More Details
Copper fittings are one of the 3 important parts for the no welding connection method. With a suitable manual propress tool, matched sizes propress fittings, and the sealant, you can get a reliable system without any leakage.
The popular size for copper fitting is from 5/16 to 3/4, there is also a bigger size until 1 1/8 for your special demand. 25B and 25BW, 30W manual propress tool is the perfect match.
Both sides equal diameter and reducing diameter copper fittings are all available for you.
Except for the copper-steel fittings, Miracle also provides aluminum fittings for the system which not require big pressure, such as the refrigerator & freezer system.
Miracle also can custom other material lokring fittings, such as steel fittings, etc. Contact our team and tell us your demands, Miracle team will choose the most suitable propress tool and fittings for your system!
Miracle also provides the single ring with hydraulic equipment to the refrigerator and freezer mass production line, which can greatly improve your production efficiency and reduce the maintenance rate!
Last but not the least, use our special sealing liquid during the connection. This is small but can not neglect procedure. The sealing liquid can fill all the small scratches and gaps during the twp connection pipes, to ensure good sealing.
Miracle sealing liquid is a specially designed sealant, can not be replaced with any glue in the market, or it will cause leaks. Make sure to use the sealing liquid before you crimp the pipes with a manual propress tool!
What is a Miracle Manual Propress Tool?
Miracle manual propress tool is a manual tool that is used to press propress fittings or lokring fittings.
The miracle manual propress tool is reliable and suitable to ensure a safe and permanent propress fittings connection for creating a solder-free connection.
Why is Miracle’s Manual Propress Tool the Most Reliable Manual Propress Tool Ever?
The miracle manual propress tool can press the lokring fittings 100% ideally each time.
Your every connection will be done in the right and safe way when you use a miracle manual propress tool.
Within 3 to 4 seconds, your pipeline will be connected safely with each other pipe with a miracle manual propress tool.
Because it needs a minimum effort but provides a maximum pressing force to your connection fittings, the fittings would be so much robust, permanent, and reliable.
Miracle’s manual propress tool has other innovative features, which made it far superior to any other manual copper crimping tool in the market.
Why Should You Use a Miracle Manual Propress Tool?
Miracle manual propress tool is a perfect tool to increase any refrigerator or freezer manufacturer’s production efficiency.
Instead of using a soldering technology, the Miracle manual propress tool is much safer and standard.
Also, the miracle manual propress tool is more straightforward to use to get your after-sales refrigerator and freezer repairing job done rightly.
Whether your job space is narrow or too complex to create the connection, you don’t need to worry.
The Miracle manual propress tool is nicely designed for any challenging job in a tight space.
You can call the miracle manual propress tool a next-generation solution in repairing refrigerators and freezers.
Miracle manual propress tool is the easiest and ultimate solution that saves all extra cost, labor, and effort.
Can I Use a Miracle Manual Propress Tool for a Central AC After-Sales Installation?
Of course. You can use your miracle manual propress tool for any AC installation service.
The miracle-designed miracle manual propress tool creates a cost-effective, fast, and a safer connection was keeping in mind a central ac after-sales installation business brand like you.
You can entirely rely on the miracle manual propress tool. For your any operation such as hotels, super shop, industrial, commercial, or home’s air-condition after-sales installation service,
Do I Need a Force Strongly to Press a Pipe with Miracle Manual Propress Tool?
Miracle manual propress fittings require a minimum force to press the lokring fittings.
Anyone can hold this with less effort and do the pressing job without putting much pressure or effort because of its safe handling with slip-proof rubberized handle grips.
In addition, the miracle manual propress tool has an anti-static handle that needs the lowest force to make the connection of the propress fitting more secure and safe.
How Many Manual Propress Tools Do You Offer, and What Are Their Uses?
Miracle offers two Series of manual propress tools.
- FRK manual propress tool
- MRC-LRT Series manual propress tool
MRC-LRT Series manual propress tool has three more models that are:
- MRC-LRT-25B or 25B Series manual propress tool,
- MRC-LRT-25BW or 25BW Series manual propress tool
- MRC-LRT-25RW or 25RW Series manual propress tool
- MRC-LRT-30B or 30B Series manual propress tool
- MRC-LRT-30BW or 30BW Series manual propress tool,
MRC-LRT-25B or 25B Series manual propress tool: You can use this tool to install ≤ a 3/4 or φ19mm pipeline.
It comes with 5 pairs of crimping heads to ensure you also can crimp 5/16, 3/8, 1/2, 5/8, 3/4 sizes pipe. You can hold one hand and move another hand of this Miracle 25B Series manual propress tool.
MRC-LRT-25BW or 25BW Series manual propress tool: This tool is used for installing your ≤3/4 or φ19mm diameter pipelines.
It also comes with 5 pairs of crimping heads which are 5/16, 3/8, 1/2, 5/8, 3/4 size.
Unlike Miracle 25B Series manual propress tool, the miracle 25BW Series manual propress tool can move both hands. So you can carve with both hands and get the job done.
MRC-LRT-30B or 30B Series manual propress tool: 30B series tool allows you to crimp large diameter pipeline.
It has the access of ≤1 1/8 or φ28.6mm size pipe. You need to hold one hand and crimp with another hand very quickly.
This miracle 30B Series manual propress tool can press many large-diameter pipes such as 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1″, 1 1/8 inch.
MRC-LRT-30BW or 30BW Series manual propress tool: This manual propress tool is useable to install tube size ≤1 1/8 or φ28.6mm. It is a dual hand-carved tool.
You can use both hands to move and press the lokring fittings. With this tool, you can crimp eight different size pipes, which are 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1′, 1 1/8 diameter pipes.
Where the Miracle FRK Manual Propress Tool Works Best?
This FRK tool, also called Freezer manual tool, is very suitable for refrigerator and freezer repair and maintenance work.
Along with R600a, R32, and R290 refrigerant system maintenance, it can press the pipe within ≤Φ8mm (or 5/16″). Thickness of the tube ≤ 1mm range though it depends on the material and thickness of the tube.
Where the Miracle MRC-LRT 25 Series Manual Propress Tool and 30 Series Manual Propress Tool Works Best?
The MRC-LRT Series manual propress tool or LRT series manual propress tool is used to repair and install air-conditioning and refrigeration.
Miracle manual propress tools are pretty much easy and reliable to create your propress connection.
You can quickly get a master of operating it, and no training or experience is required.
It has a reputation as a cost-effective and no maintenance cost tool to all refrigeration factory customers.
What are the Features of the Miracle FRK Manual Propress Tool?
Miracle FRK manual propress tool is very lightweight and pretty much easier to operate. It has an innovative and simple design to work in a narrow and tight space.
It covers many small diameter metal pipes. For solder-free connection technology, miracle FRK manual propress is a blessing. It needs only a few seconds to set up the connection with two pipes.
Miracle FRK manual propress tool comes with a small backpack with the sealing liquid.
So it’s very convenient to carry it anywhere for work. It is research, designed, produced, and manufactured by us.
So as an innovative patented manual propress tool of miracle, we care about the highest service efficiency to our customer.
So we can guaranty you for miracle FRK manual propress tool as a perfect solution for copper filter drier to capillary connection.
It is mainly designed for repair and maintenance to any refrigeration and freezer inside compressors.
So it can ensure a strong, 100% safe, and permanent connection between the capillary and copper pipes.
So it is a perfectly suitable manual propress tool for using with refrigerator aluminum ring for after-sales maintenance.
But Miracle FRK manual propress tool also can be used to press lokring fittings on any material pipe.
The miracle FRK manual propress tool is the ultimate solution to all traditional soldering connection problems.
It solves all of the drawbacks of soldering or welding. As a manual propress tool, it is very easy to learn and needs less effort to crimp.
Which Material Pipe the Miracle FRK Manual Propress Tool and Miracle 30W Manual Propress Tool Can Press?
You can use the miracle FRK manual propress tool and Miracle 30W Manual Propress Tool for pressing all materials pipe.
It can be one material pipe with different materials, such as Copper to Copper, Copper to Aluminum, stainless steel, and titanium pipe. Also, you can connect Aluminum to Aluminum and stainless steel pipe.
The miracle FRK manual propress tool and Miracle 30W Manual Propress Tool also use to press the lokring fittings in different diameter pipelines size.
We have manufactured the lokring fittings to connect any material and diameter pipeline. So there is no limitation to use miracle FRK manual propress tool and Miracle 30W Manual Propress Tool for our lokring fittings.
How Strong is a Miracle Manual Propress Tool to Bear the Load?
Miracle manual propress tool can bear 30 MPA for air application. It is much stronger than any other manual propress tool is available in the market.
Please send us your project information to know the right suitable option and tool for you.
What are the Features of the Miracle 30W Manual Propress Tool?
The miracle 30W manual propress tool is for large diameter tubes, which range can be between 5/16 to 11/8 inch, and the thickness of the tube can be ≤1.5mm.
Miracle 30W manual propress tool is for any central Air-condition installation and some refrigerator repair also.
It can work with VRF and VRV systems. One of the best features of the miracle 30W manual propress tool is it is very work-friendly for tight space.
The two types of it, such as one hand curved manual propress tool and both hands curved manual propress, allow you to press every propress fittings correctly.
As a devoted tool for pressing, both miracle FRK manual propress tool and 30W manual propress tool are lightweight, easy, and simple to learn and use. Moreover, it can create a fast speedy connection within a few seconds.
It works for all material pipes. It comes with a large number of crimping heads to match with your all sizes pipelines.
Our innovated non-plastic and a rubber ring in lokring fittings ensure the leakage rate is about 0%.
The manual propress tool is very reasonable to use with miracle propress fitting, which has a special sealant.
It also comes with a toolbox kit with your required crimping head, sealing liquid, and the primary 30W manual propress tool.
It saves you a lot of time, and at the same time, it’s very cost-effective. Please send us your project information to know the right suitable option and tool for you.
How to Create a Connection with the Manual Propress Tool?
Pressing propress fittings with a manual propress tool is super easy and simple.
First, select the correct size lokring fittings for your pipeline. The pipe surface should be flat and trim the surface to make it long-lasting.
After that, insert the inner nest, connecting ring, and sleeve on the pipe.
Now mark the portion with a pen which lokring fittings will cover. It will help recheck after crimping with a manual propress tool whether the fittings are in the right place on the pipe.
Then take the sleeve a little back and use the sealing liquid in the pipe surface and inside of lokring fittings.
Now set the lokring fittings on the pipe following the mark line.
After that, use a manual propress tool to crimp the fittings. Use one hand or both hand of the manual propress tool and push it until the connecting ring moves toward the sleeve and touch it.
Now check the marked line.
You will see the mark, and your connection is all done. The pressing procedure may take 3 to 5 seconds, and that’s how the manual propress tool and propress fittings work as a solder-free technology.
How Many Application and Operation are There Which Requires a Manual Propress Tool to Use?
You can use a Miracle manual propress tool for your HVAC Pipelines. It also can be used in our tool to your GREE air-conditioner and GREE AC copper branch.
It can use for condensing units, the more place you used soldering before, can be replaced with lokring fittings and set up with manual propress tool now.
Whether you install an open type, box type, refrigeration unit, small refrigeration unit, air-cooled condensing unit, or water-cooled condensing unit, the miracle manual propress tool is the best and reliable tool to use.
It’s also applicable for semi-hermetic compressors Bitzer condensing unit, scroll compressor Copeland condensing unit, and screw compressors.
This manual propress tool is an excellent solution for filter drier, liquid receiver, accumulator, oil separators, water pipe, and others.
Our lokring fittings are the best way to connect it without using flame, and manual propress is obvious for pressing it.
If you are not sure about the using operation, contact us right now. We will give you the free consultancy to make your project successful and effective.
Why Should I Use a Manual Propress Tool Instead of Soldering?
The traditional soldering way of connection pipe has numerous disadvantages and cons, which seriously affects overall the quality of your connection.
A soldering connection requires an open flame, and that is why it requires fire permission before work. It would be best to make sure the environment is safe where there will be an open flame. So it’s a matter of long preparation and safety issue.
Again there will be toxic gases from soldering, and it can cause dangerous hazards for the body.
Also, there has the possibility of hazard if the labor is not well experienced, trained, or careless. Overall it’s so costly, but still, there is the possibility of corrosion, rust, and leakage.
On the other hand, the solder-free connection technology, manual propress tool, and lokring fittings are the single solution for all of these problems mentioned above.
It allows you to access tremendous way of advantages and solve some major issues such as safety.
There is no risk of explosion, harmful toxic, or flame. That is why the miracle manual propress tool is very environment-friendly and cost-effective.
It has no maintenance cost or extra cost. Using a manual propress tool improves the quality of the connection and eliminates the possibility of corrosion, rust, and leakage.
Miracle manual propress tool is a very lightweight, small, and innovative tool to use against soldering technology to save money, time, and effort.
Do You Offer A Manual Propress Tool With A Custom Specification?
Yes, miracle refrigeration equipment co, ltd offers a manual propress tool with custom recruitment to meet your specific demand.
Contact us and send the details of your project, we will send you a quotation. Please send us your project information to know the right suitable option and tool for you.
What are the Other Tool by Miracle Except for the Manual Propress Tool?
Miracle also offers all sizes and types of Copper Press Tools, Lokring Tool, Plumbing Press Tools, Electronic Propress Tools, HVAC Tool, HVAC Vacuum Pump, HVAC Flaring Tool, Pipe Cutter, and all Lokring Fittings.
Can I Rely on A Miracle to Get A Manual Propress Tool?
Miracle refrigeration equipment is a giant company in China which design, research, development and manufacture the solder-free connection technology tools and fittings.
We have 15 years of experience in manufacturing international standard equipment for refrigeration and air-condition repairing, maintenance, and installation. All of our tools and fittings are innovative and own patented products.
We have an ISO 9001 quality standard certificate for each product, and it’s massively used in refrigeration manufacturing factory over the world.
All of our clients are using miracle manual propress tool with a successful service in each operation.
Keeping the best quality right and making it innovative and environment friendly with a low price, the Miracle manual propress tool won the trusted place from many plumbers.
This manual propress tool will provide you an efficient working experience. Please send us your inquiry right now to get more information about your project to finish it properly.