High-Quality Silicon Carbide Ceramic Filter Plate
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Silicon Carbide Ceramic Foam Filter work at more than 1500 Degree Celsius, filter moten iron and copper in related casting.
Silicon Carbide Ceramic Foam Filter
Ceramic Foam Filter is the third generation filter, compared with traditional filtering materials(ceramic honeycomb filter, extruded filter), our Ceramic Foam Filter have the advantages as below:
1. High thermal stability, stable chemical composition in high temperature,avoid the chemical reaction with the filtered molten metal.
2. High mechanical strength, large specific surface,efficient in purifying the metal flow.
3. Lower the filtering head loss,easy-operating,save energy. Smooth the metal flow,avoid the spray, spatter and backset,improve the exterior quality of the casting product,prevent the pore disfigurement,reduce the inferior rate.
4. Various size, shape and aperture,suitable for kinds of casting technique.
The Ceramic Foam Filter are widely used in non-ferrous metal smelt, Foundry Industrial of Copper, Aluminum Alloy, Cast Iron, Cast Steel and high temperature fume separator, special filling. silicon carbide ceramic foam filter been used to filter molten iron and copper liquid in the iron casting industry, improve the casting product quality highly.
- Q: Performance advantages of ceramic filter
- A ceramic filter for fine coal mud recovery, there is a base, the lower part of the frame is provided with a fine slime liquid trough, the fine slime liquid material groove is provided with a liquid level controller, the slime liquid material at both ends of the groove is provided with a negative pressure water tank, the water tank is provided with a negative pressure suction connection assembly fixing the other side is provided with a vacuum pump pipeline, the pipeline is communicated with a vacuum pump and vacuum pump;
- Q: The ceramic filter plate is broken. What will happen to the vacuum pump?
- At this time, take the filtrate (this is not the first water slurry) will pollute the ceramic filter pipe, friction ring, filtrate pump, may damage the vacuum system, remaining in the pipeline in the pulp will recoil pressure under the action of pollution caused by the other ceramic plates, ceramic plates blocked him. Once the ceramic plate is broken (depending on the severity), it will make the vacuum distortion, resulting in ceramic filter suction effect worse or even no suction!
- Q: How many degrees does the ceramic filter melt?
- You should say clearly what ceramic you useHowever, as a melting furnace or filter medium, alumina products are the most versatile, but also silicon carbide, corundum, mullite, spinel and so on. They use very high temperatures.
- Q: The working principle of ceramic filter
- The working principle and mechanism and the shape of ceramic filter disk vacuum filter is similar to that in the pressure under the action of suspension by filtration medium, particles are trapped cake is formed at the surface of the medium, and the liquid through a filter medium outflow, reached the purpose of solid-liquid separation. The difference is that the filter medium of ceramic filter plate with microporous capillary effect, the capillary force in the pores is larger than the vacuum force applied to microporous keep full liquid state, no matter under what circumstances, the ceramic filter plate does not allow air through, because there is no air through solid-liquid separation, low energy consumption, vacuum a high degree of.
- Q: How much is the accuracy of 50nm ceramic membrane filtration?
- The filtration accuracy is the maximum particle size that the membrane can pass through.
- Q: Does the ceramic factory use hydrochloric acid?
- In order to avoid the possibility of plugging, ceramic filter plates with suitable aperture range of different manufacturers can be selected.
- Q: Ceramic filter cleaning, sulfuric acid cleaning
- Ceramic filter medium is ceramic, ceramic generally resistant to strong acid, alkali, cleaning, it is best to use nitric acid, hydrochloric acid next, not recommended to use sulfuric acid.
- Q: The vacuum degree of the ceramic filter is normal and the cake water is large?
- The vacuum degree of the ceramic filter is normal at about -0.08MPa. Under normal circumstances, the water content of the filter cake treated with a ceramic filter is about 10%, and the moisture content of the tail filter cake is about 15%. The water content of the filter cake increases with the increase of water content in the ceramic filter.
- Q: Excuse me, what's the reason that all ceramic filters do not attract ore?
- After the joint cleaning, 0~2 hours of suction effect may be good, 2~4 may drop slightly, 4 hours later will become worse and worse, or even suck. This case should first check the backwash water pressure (instantaneous maximum pressure should not be less than 0.08MPa) is to meet the requirements, should also advance down (to ensure normal and ultrasonic cleaning combined with nitric acid dosage sufficient) and prolong the cleaning time.
- Q: What are the reasons for the program alarm of ceramic filter?
- The vacuum failure may be the vacuum pump failure, the vacuum pipeline leakage, the ceramic filter plate rupture or the connection water leakage, the backwash system is generally before the filtration water pressure is insufficient, the filter core plug and so on. Vacuum suction deficiency will lead to poor effect or even suction; cleaning standards will accelerate the ceramic filter clogging, ceramic filter clogging even if the vacuum suction is normal, will not even bad effect such as cake, jelly thin with high water content. Ceramic filter plate, hole plugging, discarding. Ceramic filter plate is life, under normal circumstances is about a year, such as pulp mud content, fine particle size or containing ingredients, cleaning is not easy to precipitate standards will reduce its life, when the ceramic filter plate close to the scrap, the suction effect will be worse. I hope my answer can help you.
Send your message to us
High-Quality Silicon Carbide Ceramic Filter Plate
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
