3 Tricks for Removing Stripped Screws

We’ve all been there. You’re in the middle of a project, and you need to remove a screw, only to find that it’s stuck or stripped. It’s a common problem, but it’s also one that can cause a lot of frustration. If you’re looking for a way to quickly and easily remove stripped screws, then this post is for you.

We’ll be sharing our top three tricks for removing stripped screws so you can easily get the job done. Whether you’re trying to remove a screw from wood or metal, these tricks will work like a charm. Keep reading to discover some solutions to this annoying problem.

Use Rubber To Get a Better Grip

Sometimes, using a rubber material can help create a better grip when removing a stripped screw. This can be accomplished by cutting off a small piece of rubber and then wrapping it around the head of the screwdriver. Once the rubber is firmly in place, attempt to turn the screw counterclockwise to loosen it. If this does not work, move on to the next trick.

Drill Through the Screw Head

This trick involves drilling directly into the head of the screw until there is enough room to insert a flathead or Phillips head screwdriver. To do this, make sure the drill bit is slightly smaller than the head of the screw and carefully drill straight into it until there is enough space for the screwdriver tip to fit in tightly. After you remove the screw, you will need to find a replacement.

Use a Screw Extractor

If all else fails, it may be time to reach for a specialized tool known as a screw extractor. These tools typically come as part of a full screwdriver set and have special tips designed specifically for extracting screws with stripped heads. To use one, carefully twist the extractor onto the head of the screw and then turn counterclockwise until it is fully unscrewed from its surface. Once finished, make sure to clean up any debris left behind from drilling or extracting the screw. A screw extractor should be a last resort when working with stripped screws due to the mess it leaves behind.

Conclusion

If you find yourself faced with a stripped screw, consider using one of these three tricks to remove it without causing any additional damage. Dealing with stripped screws can be a difficult and time-consuming process, but it doesn’t have to be. With the use of these three simple tricks, you can be on your way to removing any stripped screws quickly and easily. Whether you’re using rubber for extra grip, drilling into the screw for extra space, or utilizing a specialized screw extractor tool, these tricks can help get the job done right the first time. After all, when it comes to tackling any DIY project, efficiency is the name of the game.