Prerpints.org logo
Preprint
Review

Synthetic Pathways to Not Psychotropic Phytocannabinoids as Promising Molecules to Develop Novel Antibiotics: A Systematic Review

Altmetrics

Downloads

286

Views

112

Comments

0

A peer-reviewed article of this preprint also exists.

Submitted:

15 May 2023

Posted:

16 May 2023

You are already at the latest version

Alerts
Abstract
Due to the rapid emergence of multi drug resistant (MDR) pathogens against which current an-tibiotics are no longer functioning, severe infections are becoming practically untreatable. Con-sequently, the discovering of new classes of effective antimicrobial agents with novel modes of action is becoming increasingly urgent. The bioactivity of Cannabis sativa, an herbaceous plant used for millennia for medicinal and recreational purposes, is mainly due to its content in phytocan-nabinoids (PCs). Among the 180 PCs detected, cannabidiol (CBD), Δ8 and Δ9-tetrahydrocannabinols (Δ8-THC and Δ9-THC), cannabichromene (CBC), cannabigerol (CBG), cannabinol (CBN) and some their acidic precursors have demonstrated from moderate to potent antibacterial effects against Gram-positive bacteria (MICs 0.5–8 µg/mL), including methicillin-resistant Staphylococcus aureus (MRSA), epidemic MRSA (EMRSA), as well as fluoroquinolones and tetracycline-resistant strains. Particularly, the not psychotropic CBG was also capable to inhibit MRSA biofilm formation, to eradicate that mature, and to rapidly exterminate MRSA persiters cells. On this scenario, CBG, as well as other minor not psychotropic PCs, such as CBD, and CBC could represent promising compounds for developing novel antibiotics with high therapeutic potential. Anyway, further studies are necessary, needing abundant quantities of such PCs, scarcely provided naturally by Cannabis plants. Here, after an extensive overture on cannabinoids including their reported an-timicrobial effects, aiming at easing the synthetic production of the necessary amounts of CBG, CBC and CBD for further studies, we have, for the first time, systematically reviewed the synthetic pathways utilized for their synthesis, reporting both reaction schemes and experimental details.
Keywords: 
Subject: Chemistry and Materials Science  -   Organic Chemistry

1. Introduction

Given the rapid emergence of multi drug resistant (MDR), extensively drug-resistant (XDR) and pandrug-resistant (PDR) pathogens, against which current antibiotics are no longer functioning, we are fast moving into a post-antibiotic era where infections will be practically untreatable [1]. According to the definition of the World Health Organization (WHO), antimicrobial resistance is a natural event that occurs when microbes become tolerant to drugs, that they were susceptible to before, thus rendering several infections more difficult or impossible to treat [2,3]. Particularly, WHO has identified twelve families of bacteria to be considered as the most dangerous to human health. These families have been shared into three priority groups, comprising critical pathogens (Acinetobacter, Pseudomonas, and Enterobacteriaceae), high priority pathogens (Enterococcus faecium, Staphylococcus aureus, Helicobacter pylori, Campylobacter, Salmonella spp., and Neisseria gonorrhoeae), and medium priority pathogens (Streptococcus pneumoniae, and Shigella spp.) [4]. Resistance in bacteria can be of two types: acquired or natural, and several are the mechanisms by which pathogens become resistant to antibiotics (Figure 1).
As shown in Figure 1, antimicrobial resistance mechanisms include drug inactivation, decreased intracellular drug concentration, and altered drug targets [5]. Drug inactivation can occur either by enzymatic or chemical degradation, while decreased intracellular drug concentration can occur because of increasing drugs efflux and decreasing drugs influx [5]. In this regard, porin mutations in resistant strains alter the permeability of bacterial membranes, thus reducing the uptake of antibiotics into the bacterial cell. On the contrary, the hyperexpression of efflux pumps, which pump antibiotics out of the cell, dramatically reduces their concentration inside the cell [6]. Also, by the action of enzymes that chemically modify components of the bacterial outer membrane essential for antibiotic binding, some Gram-negative bacteria such as P. aeruginosa, Acinetobacter baumannii and others develop resistance to glycopeptide and polymyxin antibiotics. In this regard, methyltransferases are a class of enzymes capable to modify the target thus promoting the resistance to antibiotics including aminoglycoside, lincosamide, macrolide, streptogramin, and oxazolidinone [7]. Another phenomenon known as “target protection” occurs when antibiotic target’s resistance proteins, such as the tetracycline ribosomal protection proteins (TRPPs), protect bacteria from the antibiotic-induced inhibition [8].
Additionally, the antibiotic resistance could be caused by the use of antibiotics in animals bred for food. The overuse, abuse, and misuse of β-lactams, aminoglycosides, tetracyclines, macrolides, and other antibiotics, with the purpose of promoting animals’ development, can cause the presence of residual antibiotics in the products intended for human consumption obtained from those animals, and can determine antibiotics pollution into the environment [9,10,11]. It was reported that some bacterial infections in humans are carried out by animal pathogens, namely zoonotic pathogens, thus proving that antibiotic resistance can be directly or indirectly transmitted from animal to human. A few practices, including the improvement of animal feed, waste management, and animals’ natural immunity, as well as the use of antibiotic alternatives such as prebiotics, probiotic vaccines, and bacteriophages can regulate and limit the antibiotic resistance, thus maintaining the potency of the available antibiotics. However, more strategies to counteract antibiotic resistance are necessary, and currently they include the use of nanotechnology, computational methods, the use of antibiotic alternatives, drug repurposing, the synthesis of novel antibacterial agents, prodrugs, as well as the awareness, and knowledge of antibiotic prescribing (Table 1).
Omitting to comment on each strategy reported in Table 1, because it out the scope of this study, and instead focusing on the development of alternative antibiotics, we can observe that cannabinoids, better known for many other pharmacological and psychotropic effects are included in this category. Particularly, cannabinoids are prenylated polyketides produced in Cannabis plants and particularly in Cannabis sativa, which is an herbaceous plant that has been used for millennia for both medicinal and recreational purposes. C. sativa possesses a plethora of pharmacological properties and mind-altering effects, largely due to its content in cannabinoids, more precisely phytocannabinois (PCs), given their vegetable origin [12]. Collectively, more than 1600 chemical compounds have been isolated from C. sativa, of which over 500 are phytochemicals including cannabinoids, flavonoids terpenoids and sterols [12]. Among phytochemicals, more than 180 are cannabinoids, about 125 have been isolated, that can be classified into 11 structural families [12,13]. The most abundant representatives of this families are Δ9-tetrahydrocannabinol (Δ9-THC, also the main psychoactive cannabinoid), cannabidiol (CBD), and cannabichromene (CBC). Additionally, other classes whose prototypes are Δ8-E-tetrahydrocannabinol (Δ8-THC), cannabigerol (CBG), cannabinodiol (CBND), cannabielsoin (CBE), cannabicyclol (CBL), cannabinol (CBN), cannabitriol (CBT), and a miscellaneous group have been identified [12,13]. Currently, despite its psychotropic effects, Δ9- THC is used as therapeutic agent in the treatment of chemotherapy-associated nausea and vomiting, AIDS related loss of appetite, as well as pain and muscle spasms in multiple sclerosis [14]. Also, its carboxylic acid precursor, THCA, not exerting psycho-active effects in humans, is currently examined for its immunomodulatory, anti-inflammatory, neuroprotective and anti-neoplastic effects as well for its effectiveness in reducing adiposity and preventing metabolic disease caused by diet-induced obesity [15]. CBD, not psychotropic as well, is currently investigated for application in the treatment of Alzheimer’s disease, Parkinson’s disease, epilepsy, cancer and for its neuroprotective efficacy [16]. Although the most studied cannabinoids for medicinal purposes are CBD and Δ9-THC, nowadays research focus moves increasingly towards other PCs, such as the not psychoactive CBC, currently investigated for its anti-inflammatory, anti-fungal, antibiotic and analgesic effects [14], CBG and cannabigerolic acid (CBGA), which is the precursor of the decarboxylated CBG and could be considered as the “mother of all cannabinoids” (see later). Particularly, CBG has many putative benefits ranging from anti-inflammatory action to pain reliever [17]. Among other more investigated therapeutic properties, PCs including Δ9-THC, Δ8-THC, CBD, CBN, CBG, and CBC and some their correspondent carboxylic acids have shown from moderate to potent antimicrobial properties mainly against Gram-positive bacteria (MICs 0.5–8 µg/mL), and especially against strains of S. aureus, including MRSA, EMRSA, as well as fluoroquinolones and tetracycline-resistant strains, thus being promising to develop novel antibiotics [18]. Particularly, even if the exact method used by PCs remains unknown so far, recent investigations have revealed that PCs inhibits bacteria by injuring their cytoplasmic membrane [19,20]. Recently, Luz-Veiga et al. have reported the antibacterial activity of both CBD and CBG, being CBG the most potent compound, and their capability to inhibit Staphylococci adherence to keratinocytes without compromising skin microbiota, thus being very promising as antibacterial agents to treat skin infection by topical administration [21]. The antibacterial and antioxidant properties of CBD and of its homologue, 8,9-dihydrocannabidiol (H2CBD), were examined by Wu et al. against S. aureus and E. coli with excellent results also against E. coli, differently from what reported previously [22], while the interaction of CBD with broad-spectrum antibiotics such as ampicillin, kanamycin, and polymyxin B was studied by Gildea et al. [23]. By disrupting membrane integrity at extremely low dosages, CBD-antibiotic co-therapy showed an effective activity against Salmonella typhimurium, offering an intriguing alternative to treat this clinically relevant bacterium. The impressively strong antibacterial activity against MRSA of CBG has been reported by Farha et al. in the year 2020 [17]. Even in comparison to standard therapy with vancomycin, CBG outcompetes classical approaches against MRSA. Additionally, CBG demonstrated to inhibit the capability of MRSA to generate de novo biofilm, showed to succeed in disaggregating the pre-formed biofilm, to kill rapidly stationary phase cells (persisters), and to effectively inhibit MRSA also in vivo, in a murine model. The authors speculated that C. sativa may produce PCs as a natural defense mechanism against pathogens and suggested PCs as a new compound class serving as novel antibiotic drugs [17].
Unfortunately, since in C. sativa, CBGA is promptly and directly converted to CBDA and THCA, leaving no CBGA pool available to form CBG, the CBG levels in plants are exceptionally low. In this context, it has been suggested that a possible strategy to increase the CBG yield from hemp biomass could consist of harvesting much earlier in the ripening phase of the plants before the other cannabinoids are formed and detract the CBGA from the cannabinoid pool [24]. On the other hand, having available reliable synthetic procedures to prepare natural PCs would consent the accessibility to considerable quantities of CBG, as well as of other microbiologically promising minor cannabinoids, unlikely provided naturally by Cannabis plants, thus allowing further studies finalized to the development of novel PCs-based antibiotics.
Particularly, since deprived of psychoactive effects, the not psychotropic CBG, CBD, and CBC could represent promising compounds or template molecules for developing novel antibiotics with high therapeutic potential. Here, to give reader a comprehensive background on the topic, we have first reviewed cannabinoids, in terms of classification, chemical structures, mode of action, main pharmacological properties, current applications, clinical applicability, and antimicrobial properties. Doing this, CBC, CBG and CBD, known to exclusively possess beneficial non-mind-altering pharmacological effects and reported to have potent antibacterial effects, have emerged as the most promising compounds for the development of new efficient antibacterial agents. So, with the aim to ease the synthetic production of high amounts of CBC, CBG and CBD for favoring further studies and for promoting the development of new antimicrobial agents, we have systematically reviewed all the synthetic pathways utilized for their preparation, reporting both reaction schemes and experimental details.

2. Phytocannabinois (PCs), Endocannabinoids (ECs) and Synthetic Cannabinoids (SCs)

2.1. Phytocannabinoids (PCs) and Endocannabinoids (ECs)

One of the main reasons Cannabis plants including Cannabis sativa have so many diverse uses and have been employed for millennia for medicinal and recreational purposes, consists in the plant’s ability to produce over 500 different phytochemicals [12,25]. In addition to terpenes and flavonoids, which are responsible for much of the color, taste, smell and antioxidant properties of Cannabis, about 180 of these chemicals are cannabinoids [13]. Generally, the term ‘cannabinoids’ refers to a heterogeneous family of compounds that exhibit activity upon particular human cannabinoid receptors, namely CB1 and CB2 [26]. They encompass the natural compounds present in the Cannabis plants, lipid mediators called ECs naturally produced by human’s cells, as well as by all vertebrates on planet Earth, and the synthetic analogs of both groups designed by scientist, called SCs [26]. Natural cannabinoids from Cannabis are more specifically called PCs referring to their original plant source, differently from ECs which are produced from human cells [27,28]. PCs and ECs could include compounds structurally very different both between the two families and inside the same class, as shown in Figure 2 and Figure 3, which report the structure of the most relevant PCs and ECs, respectively.
Both PCs and ECs exert their effects by interacting with CB1 and CB2 receptors, found throughout the human body, and whose locations have been listed in Table 2. We have constructed Table 2 using the valuable information contained in the relevant work by Fraguas-Sánchez et al. [29].
The activation of CB1 receptor or the concurrent activation of both receptors by ECs or PCs leads to both psychotropic, undesired effects and therapeutic outcomes. Exactly, while mind alteration, psychotropic effects, cardiovascular adverse events can occur, analgesic, sedative, antidepressant, anti-inflammatory, anti-anorexic, anti-emetic, anticancer and antibacterial desirable effects can also arise. As an example, the FDA-approved drug formulations containing the synthetic versions of Δ9-THC namely dronabinol (marketed as Marinol® or Syndros®) or nabilone (marketed as Cesamet™), as well as the extracted THC (marketed as Sativex®), possess affinity for both CB1 and CB2 [30]. Clinically, they are primarily used to treat the chemotherapy-induced nausea, to enhance appetite in cachexic AIDS-patients, and to alleviate the spasticity and pain associated with multiple sclerosis [14]. Unfortunately, evidence of undesired psychotropic and cardiovascular adverse effects strongly limits the therapeutic efficacy of such medicines [31]. Otherwise, the selective activation of CB2 receptors, occurring for example by CBG or CBD, could provide therapeutic effects, such as immuno-modulatory properties, anti-inflammatory, anti-emetic, and anti-anorexic effects without exerting the psychotropic actions deriving from the CB1 activation. In addition, the potent analgesic effects, associated to the activation of CB2, could be helpful in alleviating chronic widespread musculoskeletal pain (CWP) disorders, such as fibromyalgia syndrome [32]. Also, the selective activation of CB2 receptors could enhance severe human diseases as osteoporosis, atherosclerosis, cancer, chronic liver injuries and neurodegeneration [30]. Collectively, CB1 and CB2 receptors together with ECs make part of the so-called EC system (ECS), which was discovered in the 1990′s by scientists researching cannabinoids, which includes also several enzymes involved in producing and recycling ECs. In humans, ECs are naturally produced by cells within the body in response to external factors, like pain or temperature. As observable in Figure 3, among other molecules, ECs include the well-known compounds 2-arachidonoylglycerol (2-AG) and anandamide (ANA), as well as the less-known ECs like virodhamine, and 2-arachidonoyl glycerol ether [33]. Particularly 2-AG and ANA activate both CB1 and CB2 receptors with affinity for CB1 higher than that for CB2 [30]. Collectively, the interaction between ECs and their corresponding receptors is pivotal in maintaining the body’s internal balance or homeostasis. ECs regulate some very important aspects of humans’ health, as depicted in Figure 4.
Researchers suggest that ECs deficiencies could cause many refractory health conditions, such as depression, arthritis, fibromyalgia, and Crohn’s disease that could ameliorate upon treatments with Cannabis, due to the activation by PCs of the same receptors activated in normal conditions by ECs. In fact, as above reported, PCs specifically produced by Cannabis plants and not by humans, when appropriately assumed can interact with CB1 and/or CB2 receptors triggering effects similar to those prompted by ECs, thus influencing the same aspects reported in Figure 4 and contributing to maintain or recover the body’s internal balance or homeostasis [25]. Anyway, if abused, the psychotropic and undesired side effects of psychoactive PCs, such as THC and CBN may overwhelm the benefits. The following Figure 5 shows the chemical structure of two metabolites which form in the human body after Cannabis consumption, of cannabicyclolic acid (CBLA), a degradative byproduct of cannabichromenic acid (CBCA), and of cannabicyclol (CBL) which is the product of decarboxylation of CBLA [34]. Particularly, CBL is a non-psychoactive cannabinoid, which could also derive by degradation of CBC through natural irradiation or under acid conditions [35].
Particularly, CBLA, like CBCA and CBC, is a minor cannabinoid found in low concentrations in the Cannabis plant. It is not produced by Cannabis directly, but it forms when CBCA degrades after exposure to ultraviolet (UV) light or heat. CBLA is an acidic cannabinoid, like THCA, CBCA and CBDA, which produces CBL, upon decarboxylation and release of CO2. CBLA is not considered intoxicating, is often deemed non-psychoactive or non-psychotropic, and curiously, it does not interact with receptors CB1 and CB2. There is little research into the effects and potential therapeutic uses of CBLA and CBL. Anyway, although more research is needed to confirm these attributes, some suggestions exist, that CBLA may have anti-inflammatory, antimicrobial, and antitumoral effects, due to its structural similarity to CBCA and CBN [34]. As for the metabolite 11-NCTHC, it is a no longer active secondary metabolite of THC, which forms in the body through the oxidation of the still psychoactive metabolite of THC, 11-HTHC, by liver enzymes [36].

2.2. Synthetic Cannabinoids (SCs)

The third group of cannabinoids consists of synthetic analogs of both ECs and PCs groups, appositely designed by scientists in the field, to enhance the benefits and therapeutic properties of ECs and PCs, while reducing the psychotropic and adverse effects. Among others, they include the compounds reported as examples in Figure 6 (chemical structures), and Table 3 (pharmacological properties and selectivity for receptors CB1 and CB2), which have demonstrated to be promising for treating severe humans’ chronic diseases including breast and prostate tumors, the unpleasant side-effects of chemotherapy, and chronic pain [26].
On the base of their affinity and selectivity for receptors CB1 and CB2, they can exert both therapeutic and psychotropic effects, or mainly one of the two. Table 3 summarizes the selectivity of some SCs for CB1 and CB2, and their therapeutic effects.
Methanandamide (AM-356) is a synthetically constructed stable chiral analog of anandamide. AM-356 acts on the cannabinoid receptors, and specifically on CB1-type receptors in the CNS found in mammals, fish, and certain invertebrates (e.g., Hydra), thus resulting also a psychoactive compound [45]. HU-210, as well as other SCs including L-759,656, HU-308, L-759,633, L-768,242 etc. are potent analgesic and anti-inflammatory compounds with many of the same effects as natural THC [40]. WIN 55,212-2 is an organic heterotricyclic SC. Particularly, it is the 5-methyl-3-(morpholin-4-ylmethyl)-2,3-dihydro [1,4]oxazino[2,3,4-hi]indole substituted at position 6 by a 1-naphthylcarbonyl group. It has a role as an analgesic, and neuroprotective agent, as well as an apoptosis inhibitor [46].
JWH-133 is a Δ9-tetrahydrocannabinol lacking the hydroxy group and having a 1,1-dimethylbutyl group at position 3 in place of the pentyl group. It acts as potent and highly selective CB2 receptor agonist, thus exerting antineoplastic effects, and working as a vasodilator and an anti-inflammatory agent, as an apoptosis inhibitor, as well as an analgesic molecule [47].
Δ11-THC, also known as exo-tetrahydrocannabinol, is a synthetic isomer of tetrahydrocannabinol, developed in the 1970s. It can be synthesized from Δ8-THC by several different routes, and only the (6aR, 10aR) enantiomer is known. In animal studies in mice, it was found to exert the same effect of Δ9-THC with around 1/4 its potency. It has been identified as a component of “vaping liquids” sold for use in humans [48].

2.3. Cannabinoids Clinically Approved

Collectively, PCs and the several developed SCs have proved to be useful in the treatment of chemotherapy side effects such as nausea, vomiting, pain, weight loss, and lack of appetite [14], but only few drugs based only on THC and CBD have been approved so far in some countries, as palliative agents in anticancer treatments. Dronabinol, the synthetic analogous of Δ9-THC and nabilone, a SC similar to Δ9-THC, are currently approved in Canada, United States, and several countries of Europe to treat nausea and vomiting associated with chemotherapeutic treatments [49]. An oromucosal spray containing a mixture 1:1 of Δ9-THC and CBD marketed as Sativex® is approved in Europe and Canada for the treatment of spasticity associated with multiple sclerosis (MS), while in Canada Sativex is applied also as an adjunctive analgesic for the treatment of pain in patients with advanced cancer and MS [50,51]. An oral solution of CBD, marketed as Epidiolex® is an US FDA-approved prescription that is used in association with clobazam to treat refractory epilepsy due to Lennox–Gastaut or Dravet syndrome [52,53]. Finally, we signalize the case of Rimonabant (or SR141716), which was marketed as Acomplia®. It is an inverse agonist for the CB1 receptor, capable to reduce the appetite, and was clinically applied as an anorectic anti-obesity drug. It was withdrawn from the market in 2009, after a long dispute between the European Medicines Agency (EMA) and the Cochrane Collaboration, because it increased the risk of psychiatric problems and suicide [54].

3. Phytocannibinoids: Polyfunctional Molecules Promising to Develop Novel Antibiotics

3.1. Not only THC and CBD

We’ve likely heard that C. sativa provides THC, having high medicinal value, but also mind-altering effects (psychotropic) and cannabidiol (CBD), which is praised for its medicinal benefits without being psychoactive [25]. Anyway, while these are the most well-known and abundant PCs, as above mentioned, there are a plethora of other cannabinoids produced by the Cannabis plants.
Particularly, C. sativa embraces about 1600 chemical substances, 500 bioactive compounds, including approximately 180 cannabinoids (113-125 isolated), many terpenes, and flavonoids which could be promising as novel therapeutics [24,55].
More generally, the known different cannabinoids, are naturally present not only in Cannabis, but also in various other plants or in burned cannabis resin. Cannabinoids are found in certain species of flowering plants (Rhododendron), some species of liverworts, an ancient fern-like plant, as well as in certain types of fungi (myco-cannabinoids). Among PCs, cannabigerolic acid (CBGA) which is the direct precursor of the decarboxylated CBG, can be considered as the “mother of all major cannabinoids”, according to the biosynthetic pathway in Figure 7 [24].
The most common misunderstanding about Cannabis consists in thinking that the plant produces THC, as well as the other major activated cannabinoids (red compounds in Figure 7), while it actually produces their acidic forms (raw cannabis), such as CBGA, THCA, CBDA, CBCA, which are converted in the decarboxylated forms (CBG, THC, CBD, CBC) only once the flower is heated. Actually, very little activated cannabinoids are found in fresh Cannabis flower, while most are in the acidic form and get decarboxylated into THC, CBD, CBC or CBG upon smoking or plant ageing [25]. Anyway, despite being most dismissed as inactive, because not absorbed in the brain, also acids cannabinoids may actually offer a lot of therapeutic potential, including antimicrobial activity.

3.2. Much more Beyond the Psychotropic Effect of THC

Figure 8 shows the several pharmacologic activities of some relevant natural cannabinoids (PCs), including also some minor cannabinoids of the varin (V) family.
From a structural point of view, CBDV, THCV and CBGV reported in Figure 8 and CBCV (not reported), belonging to the varins (Vs), have two fewer carbon atoms in the alkyl chain respect to the correspondent better-known cannabinoids CBD, THC, CBG and CBC. This shorter carbon chain strongly affects their pharmacologic activity, thus being promising compounds in managing weight loss, diabetes, cholesterol problems, autism, seizures, and more [56]. Particularly, THCV, although very structurally similar to THC has a totally different effects profile. The slight alteration in its chemical structure implies that, unlike THC, it acts as an antagonist to the receptor CB1 rather than an activator, thus not producing relaxing, euphoric, and energizing outcomes, but exerting antianxiety, anticonvulsant, appetite suppressant and anti-inflammatory effects [25]. THCV could be a weight-loss aid, by reducing appetite and boosting metabolism, and could be helpful in the diabetes treatment by controlling the blood sugar levels and the insulin production. Also, THCV may help promoting new bone cell growth, preventing weakening bones, and can even act as a neuroprotectant in conditions like Parkinson’s disease [57].
Collectively, as observable both in Figure 8 and in the following Figure 9, all the reported cannabinoids, like many other phytochemicals, are multifunctional compounds owing several pharmacological activities, being THC, the cannabinoid possessing the highest number of effects on human body, followed by CBD and CBG.
Interestingly, only THC and CBN possess intoxicant effects (psychotropic actions), while all other PCs in Figure 8 and 9, except for CBGV, have demonstrated to possess antimicrobial properties, and especially antibacterial effects on MDR strains of Gram-positive species, thus being promising molecules or template compounds to develop novel antibiotics.

3.3. Antimicrobial Cannabinoids

Table 4 reports the most relevant PCs, both in the acid forms and in the decarboxylated ones, ECs, and SCs (mainly prepared by scientist to study the structure-activity relationships (SARs), which were in the past or recently assayed as antimicrobial agents. Figure 10 shows the chemical structure of SCs present in Table 4 not showed previously, while the subsequent Table 5 reports the antimicrobial properties of compounds listed in Table 4, expressed as minimum inhibitory concentrations (MICs), as well as the target pathogens.
Since except for compounds Δ11-THC, Abn-CBD, Abn-CBG and CBC derivatives, the other SCs reported in Table 4 and Figure 10 demonstrated insignificant activity against the tested pathogens reported in Table 5 (MICs > 100 µg/mL), they were no longer reported in Table 5.
The first data we have found concerning the possible antibacterial activity of PCs were reported by Van Klingeren and Ham in the year 1976 [58]. The authors tested both THC and CBD on S. aureus and some isolates of Streptococcus genus, finding MICs in the range 1-5 µg/mL for both compounds against both species [58]. A weak antifungal activity was reported in the past (years 1981, 1982) only for CBC, some its synthetic derivatives [63] and for CBG [65], but no recent reports is present literature, thus assessing the poor interest of scientists, probably due to the scarce effects. On the contrary, in the year 1981, Turner found good antimicrobial activity for CBC against Bacillus subtilis (MIC = 0.4 µg/mL) and S. aureus (1.6 µg/mL), and for ICBC against B. subtilis (MIC = 0.8 µg/mL) [63]. ∆9- THC, CBD, CBG, CBC, and CBN were assayed for their antimicrobial properties by Appendino et al. on the MDR S. aureus SA-1199B strain, which showed a high level of resistance to certain fluoroquinolones, on EMRSA isolates, which are the major epidemic methicillin-resistant S. aureus strains occurring in U.K. hospitals, on a macrolide-resistant strain (RN4220), on a tetracycline-resistant line (XU212), and on a standard laboratory S. aureus strain (ATCC25923) [59]. All compounds showed potent antibacterial activity, with MIC values in the 0.5-2 µg/mL range. Interestingly, also the acidic precursors of CBD, CBG, and THC (compounds CBDA, CBGA and THCA) maintained substantially the activity [59].
Since given their non-psychotropic profiles, CBD and CBG can be considered especially promising, Appendino et al. performed structure-activity studies. Among the various synthetic derivatives, only the synthetic abnormal cannabinoids Abn-CBD and abn-CBG, although slightly less potent than CBD and CBG, showed antibacterial activity comparable to that of their corresponding natural products [59].
According to recent reports, 18 cannabinoids including CBC, CBD, CBG, CBN, Δ9-THC and their carboxylic precursors (pre-cannabinoids CBCA, CBDA, CBGA, Δ9-THCA), CBDV, THCV and their precursors (CBDVA, THCVA), Δ8-THC, CBL, 11-NCTHC, 11-HTHC and Δ11-THC were tested against MRSA USA300, a highly virulent and prevalent community-associated MRSA, by Farha et al. [17]. Susceptibility tests were conducted according to the Clinical and Laboratory Standards Institute (CLSI) protocol [67].
CBG, CBD, CBN, CBCA, Δ9-THC, Δ8-THC, and Δ11-THC were potent antibiotics with MICs = 2 µg/mL. A moderate loss of potency was observed for their acidic precursors such as CBDA, CBGA and THCAA. THCV and CBDV were less active, displaying MICs = 4 and 8 µg/mL, respectively. It is well-known, that biofilm formation by MRSA, typically on necrotic tissues and medical devices, represents an important virulence factor influencing the persistence of MRSA and is typically associated with increased resistance to antimicrobial compounds. In this regard, Farha et al. investigated also the capability of the above-mentioned cannabinoids to inhibit the formation of biofilms by MRSA [17]. According to the reported results, the tested cannabinoids except for varins, clearly repressed MRSA biofilm formation, with CBG exhibiting the most potent antibiofilm activity. Indeed, at concentration of 0.5 µg/mL (1/4 MIC), CBG inhibited biofilm formation by ∼50% [17].
When its effect was evaluated on preformed biofilms by determining its minimal biofilm eradication concentration (MBEC), CBG eradicated preformed biofilms of MRSA USA300 at concentration 4 µg/mL. Additionally, on MRSA persister cells, which are a nongrowing, dormant cells subpopulations, which exhibit high levels of tolerance to antibiotics, and are responsible of chronic and relapsing S. aureus infections, such as osteomyelitis and endocarditis, the tested cannabinoids showed antipersisters activity which correlated with MIC values [17]. Again, CBG was the most potent cannabinoid against the persisters. In time-kill experiments, while the β-lactam oxacillin at 160 µg/mL (5 × MIC) did not show any activity, CBG killed persisters in a concentration-dependent manner starting at 5 µg/mL, and rapidly eradicated a population of ∼108 CFU/mL MRSA persisters within 30 min of treatment.
Expectedly, the two most common human metabolites of THC, (±)11-NCTHC and (±) 11-HTHC, as well as CBL were inactive at the highest concentrations screened (MIC > 32 µg/mL). Unfortunately, in the study by Farha et al., none of these analogous displayed bactericidal effects against E. coli [17,55]. However, CBG was found to be effective also against Gram-negative bacteria when associated to polymyxin B or the less nephrotoxic polymyxin B nonapeptide [17,55] and acted as a sensitizing agent in combination with various antibiotics [68].
Concerning the association with polymyxin B, it was proposed that polymyxins permeabilize the outer membrane of Gram-negative pathogens, unassailable by CBG, thus enabling CBG to reach and damage the inner membrane [17,55]. Additionally, when E. coli VCS257 was treated with CBD in combination with erythromycin, vancomycin, rifampicin, kanamycin or colistin, an enhanced antimicrobial effect was observed [68]. In the year 2020, Martinenghi et al., tested CBDA and CBD against S. aureus and S. epidermidis finding very low MIC for CBD (MIC = 1 µg/mL and 2 µg/mL, respectively), and MICs twice as high for CBDA, while CBDA displayed MIC = 4 µg/mL against MRSA USA300 [60]. In the same year, Wassmann et. al. reported for CBD, MICs = 4, 4, 4, and 8 µg/mL against MRSA USA300, MRSE, L. monocytogenes and E. faecalis respectively [62]. The year later, MICs in the range 1-5 µg/mL were reported for CBG, against some species of Streptococcus genus [64].
Feldman and colleagues tested ANA and AraS, which are the main ECs found in humans against MRSA [66]. While they resulted completely inactive towards planktonic cells (MICs > 256 µg/mL), demonstrated appreciable activity against MRSA biofilm, by reducing the biofilm formation by 51-54% (ANA) and 33-61% (AraS) at concentration 64 µg/mL [66]. As novelty, very recently, the antibacterial and antioxidant properties of CBD and its homologue, 8,9-dihydrocannabidiol (H2CBD), were also examined by Wu et al. against S. aureus and E. coli with excellent results against both species with both compounds [61]. On these findings, C. sativa and its non-psychotropic cannabinoids, represent an interesting source of novel antibacterial agents which could help in addressing the problem of multidrug resistance in MRSA and other pathogenic bacteria.

4. Production of Phytocannabinois: From Biosynthesis to Synthetic Procedures

4.1. Biosynthesis of Not Psychotropic Cannabinoids (CBC, CBG and CBD).

The following Scheme 1 and Scheme 2 show the biosynthetic path to form geraniol pyrophosphate (GPP) and leading to CBG, CBC and CBD starting from CBGA, respectively. As reported in the previous Figure 7, in C. Sativa, from CBGA, THCA is also produced, which provides THC upon decarboxylation, which in turn gives CBN, upon oxidation and aromatization. Although they have demonstrated interesting antibacterial effects, THCA, THC and CBN were not considered in this section because possess from weak to strong psychotropic effects, which limit their possible therapeutic use. On the contrary CBC, CBG and CBD, not exerting psychotropic actions have higher therapeutic potentials thus being more suitable to develop novel antibiotic.
Briefly, the tetraketide synthase (TKS) catalyzed sequential condensation of hexanoyl-CoA with three molecules of malonyl-CoA yields 3,5,7-trioxododecaneoyl-CoA. By olivetolic acid cyclase (OAC), this compound cyclizes and aromatizes, through the loss of Coenzyme A, providing olivetolic acid (OLA). During these first steps, by hydrolytic processes and lactonization the side-products pentyl diacetic lactone (PDAL) and hexanoyl triacetic acid lactone (HTAL) are also produced, while upon a decarboxylation TKS catalyzed, olivetol is formed. Then, aromatic prenyltransferase inserts the prenyl group at the highly nucleophilic 2-resorcinol position to provide cannabigerolic acid (CBGA). Then, while CBGA provides CBG upon a non-enzymatic loss of CO2, through reactions catalyzed by the opportune synthases, it provides the cannabinolic acids CBDA, and CBCA, which in turn provide the de-carboxylate (-)-CBD and CBC, by non-enzymatic decarboxylation.

4.2. Synthetic Procedures to Prepare Not Psychotropic Cannabinoids CBC, CBG and (-)-CBD.

In the following section we have reported all the synthetic procedures found upon a survey carried out using SciFindern data base (https://scifinder-n.cas.org/, accessed on 03 May 2023), excluding the Patents. Particularly, SciFinder, produced by Chemical Abstracts Service (CAS), is the most comprehensive database for the chemical literature, searchable by topic, author, and substances by name or CAS registry number, or using the editor to draw chemical structures, substructures, or reactions.

4.2.1. Syntheses of CBC

The most recent synthetic procedures for preparing CBC were reported in the year 2021. Particularly, Seccamani et al. [69], who reproduced synthetic procedures previously reported [70,71,72,73]. Particularly, CBC was synthesized starting from E-geraniol according to Scheme 3.
Briefly, E-geraniol dissolved in dry hexane was treated with manganese dioxide (MnO2) under magnetic stirring at room temperature for about 12 hours and then heated at 40 °C for further 3 hours, to provide citral as crude product, which was purified by silica gel chromatographic column obtaining the purified aldehydes (with a yield of 75%) as an E/Z mixture (E/Z 95/5, GC-MS) of geranial (E-citral, 71%) and neral (Z-citral, 4%). Subsequently, the prepared mixture was treated with Ac2O in EtOAc in the presence of piperidine and heated at 90 °C for 1 hour, to give an iminium salt, which was added with a solution of olivetol in toluene and stirred at 130 °C for 40 hours. Upon an oxa-annulation consisting of a Knoevenagel reaction providing the 1-oxatriene intermediate, followed by an oxa-electrocyclization, the crude CBC was achieved, which was then purified by chromatographic column. Pure CBC (yield 65%) and cannabicyclol (CBL, yield 10%) were finally isolated. Interestingly, Luo et al. [70], and Yeom et al. [72], who previously employed this procedure starting from a mixture of E/Z-citral, and from only geranial (E-citral) respectively, achieved CBC with a yield lower than Seccamani (50% vs. 65%). Similar procedures starting from E/Z-citral and olivetol were proposed in the same year (2021), by Schafroth, et al. [74] and by Anderson et al. [75], achieving CBC with yields of 50% and 35%, respectively. Particularly, the group of Schafroth evidenced that acidic or basic conditions were determinant to redirect the reaction towards the formation of CBC rather than towards that of Δ9-THC (Scheme 4).
Differently and more specifically, Andersen et al. reacted olivetol and E/Z-citral in toluene using ethylenediamine diacetate as catalyst and heating the solution at reflux for 6 hours (Scheme 5), as it was reported previously by Lee et al. [76], who prepared CBC with similar yield (40% vs. 35%).
The use of ethylenediamine diacetate as catalyst had been reported in the past by Tietze et al. in the year 1982 [77], who achieved CBC in similar yield (37%) according to a different path (Scheme 6).
Briefly, geranial (1) was reacted with 5-pentyl-1,3-cyclohexandion (2) in methanol (CH3OH) with catalytic amounts of ethylenediamine diacetate at 20°C, achieving the intermediate 3, which cyclized to the crude compound 4. A chromatographic column was necessary to purify 4, which was isolated in 62% yield. Compound 4 was treated with lithium di-isopropyl-amide (LDA) in tetrahydrofuran (THF) at -78°C and phenyl-selenenyl chloride (C6H5SeCl), to afford the selenide intermediate 5, which upon oxidation with 3-choloroperoxybenzoic acid in dichloromethane (DCM) followed by reaction with dimethoxy aniline, provided CBC in 37% yield.
An analogous procedure, using t-butylamine in place of ethylenediamine diacetate, and at reflux time of 9 hours in place of 6, had been reported in the years 1978 and 1982 by Elsohly et al. [65,78]. CBC was achieved in high yield (>60%), upon purification carried out reducing the unreacted citral with NaBH4. In the 2008, the same reaction was exploited in their study by Appendino et al. [59]. Interestingly, CBC was prepared in very high yield (75%) by Quilez del Moral et al. [79], by a biomimetic green approach using water as solvent and ammonium chloride as catalyst, according to Scheme 7.
Particularly, working on a milligrams scale, the authors started from the commercial citral, as a mixture 4/1 of geranial (E-citral) and neral (Z-citral), which was reacted with olivetol in water using ammonium chloride (NH4+Cl-) as catalyst for 24 hours at reflux. The obtained crude product was purified by chromatographic column, thus isolating CBC in 75% yield. The procedure is interesting, because depending on the use of a surfactant as sodium dodecyl sulfate (SDS) or that of NH4+Cl- as catalyst, it was possible for the author realizing an “in water” reaction achieving ortho-THC as main product (CBC 45% yield), or an “on water” reaction achieving CBC as major compound (75% yield).
In the past (year 1995), a multi-step synthesis for CBC was reported by Yamaguchi et al. (Scheme 8) [80].
Briefly, the 2-hdroxy-6-methoxy-4-pentylbenzaldeide (2) was prepared demethylating 1 with magnesium iodide etherate. Then, 2 was cyclized to 3 using dimethyl isopropylidenemalonate and K2CO3 in dimethylformamide (DMF) at 130 °C for 8 hours, obtaining the chromene-2-acetate derivative 3 in 54% yield. Subsequently, 3 was converted to the aldehyde 7, by reduction with lithium aluminum hydride (LAH), chlorination with SOCl2, cyanation with NaCN and final reduction with diisobutylaluminium hydride (DIBALH). A Wittig reaction of 7 with isopropylidenetriphenylphosphorane provided O-methylcannabichromene 8 which was demethylated to CBC (yield 55%) by treatment with sodium ethanethiolate in refluxing DMF.

4.2.2. Synthesis of CBG

The oldest synthetic procedure to prepare CBG we found, not reporting the reaction yield, was described by Gaoni et al. in the year 1964 [81]. The authors synthesized CBG by boiling geraniol (1) with olivetol (2), in decalin for 36 hours (Scheme 9).
Similarly, CBG was prepared by the condensation of geraniol and olivetol, using DCM in the presence of p-toluenesulfonic acid (PTSA) at 20° to achieve CBG as crystalline material in 52% yield, by Mechoulam et al. according to Scheme 10 [82].
Starting from the same materials (geraniol and olivetol) and using DCM as solvent and PTSA monohydrate, as catalyst, Farha et al. [17], prepared CBG according to Scheme 11 and reproducing the procedure previously reported by Taura et al. [83].
The reaction was stirred at room temperature in the dark for 12 hours, then added with aqueous saturated NaHCO3. After evaporation of the separated organic phase, a crude residue was obtained, which was purified via flash column chromatography on silica gel, providing pure CBG as an off-white powder in 28% yield.
In 1985, it was reported that when BF3-etherate on silica was used as condensing agent in the reaction of (+)-p-mentha-2,8-dien-l-ol (1) with olivetol (2), CBG could be obtained as the major product, in 29% yield (Scheme 12) [84].
Particularly, BF3-etherate was added under nitrogen to a stirred suspension of silica in dry DCM, added with Z-(+)-p-mentha-2,8-dien-l-ol and olivetol dissolved in DCM and stirred at room temperature for 2 days. After having quenched the reaction with an aqueous solution of sodium bicarbonate followed by extraction with diethyl ether, CBG was achieved in 29% yield.
Later, the same authors used the above-reported procedure starting from geraniol and olivetol, as in Scheme 9, Scheme 10 and Scheme 11 achieving CBG in 29% yield, as well [85,86].
A chemoenzymatic synthesis of CBG was reported by Kumano et al. in the year 2008 [87], which we did not discussed in the present work, because out of our scope aiming at describing only processes totally synthetic.
In the year 2020, Jentsch et al. reported the optimized synthesis of three phenolic natural products with unprecedented efficiency, using a new alumina-promoted regioselective aromatic allylation reaction [88]. As for CBG, it was prepared in one step from the inexpensive olivetol and geraniol (Scheme 13).
Briefly, to a solution of geraniol and olivetol in dichloroethane (DCE), acidic alumina (Al2O3) was added, and the heterogeneous mixture was stirred at reflux temperature for 6 hours. After filtration of the alumina and the removal of the organic solvent, CBG was achieved as a yellow oil, that was purified via chromatography, thus obtaining pure CBG in 62% yield.
Like for CBC, the most recent synthetic procedures for preparing CBG have been reported in the year 2021. The group of Curtis et al. reported a multistep procedure based on a tandem Diels–Alder/retro-Diels–Alder cycloaddition which allowed to achieve CBG in very high yield (81%) (Scheme 14) [89].
The group of Seccamani [69], reproposed the procedure previously described by Baek et al. in the year 1996 [86] (Scheme 15).
Briefly, CBG was prepared reacting olivetol dissolved in dry chloroform (CHCl3) with geraniol, in the presence of PTSA for 12 hours at room temperature. The crude CBG was achieved as an oil, which was purified by silica gel chromatographic column. CBG was isolated with a low 15% yield.

4.2.3. Synthesis of (-)-CBD

The first synthetic routes available to synthetize (-)-CBD [90,91,92,93] are of scarce practical value, as they lead to (-)-CBD in mediocre or even insignificant yields and the unnatural CBD isomer (Abn-CBD) (see Figure 10) was obtained in amounts considerably larger than those of (-)-CBD. Although such poor results, the procedure proposed by Petrzilka et al. in the year 1969, but using E-(+)-p-mentha-2,8-dien-1-ol in place of Z-(+)-p-mentha-2,8-dien-1-ol and olivetol in benzene in the presence of catalytic amounts of PTSA was reproduced by Papahatjis et al. in the year 2002, achieving (-)-CBD in 31% yield [94]. The best route to (-)-CBD described is the condensation of (+)-p-mentha-diene-l-olo with olivetol in the presence of weak acids, reported by Razdan et al. in the year 1974 and Uliss et al. the next year [93,95]. In this case, the Abn-CBD obtained was converted to (-)-CBD with BF3-etherate by a retro-Friedel-Crafts reaction, followed by recombination. However, with this reagent the reaction proceeded further causing cyclisation of (-)-CBD.
In the year 1985, it was reported that when BF3-etherate on alumina is used as condensing agent in the reaction of Z-(+)-p-mentha-2, 8-dien-1-ol (1) with olivetol (2), (-)-CBD was obtained as the major product, in 55% yield as chromatographically pure oil, or in 41% yield as crystalline material (Scheme 16) [84].
No cyclization was observed, and side products were much more polar (14% yield) or much less polar (6% yield) than (-)-CBD.
Particularly, BF3-etherate was added under nitrogen to a stirred suspension of basic aluminum oxide (Al2O3) in dry DCM, and after 15 min at room temperature and 1 min at 40-41°C, (+)-p-mentha-2,8-dien-l-ol and olivetol dissolved in DCM were added. The reaction was quenched within 10 seconds with 10% aqueous solution of sodium bicarbonate (10 mL), and after evaporation of the organic extracts, (-)-CBD was obtained.
In the year 1988, Crombie et al. [96] reported the reaction of (1S,2S,3R,6R)-(+)-E-car-2-ene epoxide and that of p-menthadienol with olivetol in the presence of PTSA. Particularly, the starting material (1S,2S,3R,6R)-(+)-E-car-2-ene epoxide (3) was prepared starting from car-3-ene (1) by its treatment with potassium tert-butoxide to achieve the derivative 2, which after epoxidation with m-chloroperoxybenzoic acid provided the desired compound 3 (Scheme 17). Overwise, p-menthadienol was prepared by citral with HCl in water or with PTSA in water/DCM (reaction not reported). The authors observed that in both cases, among other minor compounds, (-)-CBD, Abn-CBD, 1-THC and 6-THC were obtained. In particular, when (1S,2S,3R,6R)-(+)-E-car-2-ene epoxide was reacted with olivetol in benzene in the presence of docosane as catalyst for 45 min at 40°C, the main product which formed was p-menthadienol with traces of (-)-CBD, Abn-CBD and THC. The further reaction of the obtained p-menthadienol with olivetol for 1h at 50°C in benzene with docosane as well, afforded (-)-CBD in 30% yield, together with THC (18%), Δ8-THC (6%), and Abn-CBD (13%) (Scheme 17).
Rationally, the direct reaction of p-menthadienol (1) with olivetol in the conditions above reported afforded (-)-CBD in 30% yield (Scheme 18).
Although in different conditions in terms of solvents, times, temperature, stereochemistry and catalysts, the reaction of p-menthadienol with olivetol was exploited by different research groups. Kinney et al. reacted E-(+)-p-mentha-2, 8-dien-1-ol with olivetol in toluene with PTSA for 1.5 hours at 18-25°C achieving (-)-CBD in 20% yield [97]. Also, Villano et al. in the year 2022 condensed olivetol with commercially available Z-(+)-p-mentha-2, 8-dien-1-ol in the presence of 33 mol% of wet PTSA in toluene at 0°C for 3 hours, affording a mixture of normal (-)-CBD and Abn-CBD, which were isolated in 26% and 38% yield respectively after a chromatographic column. Importantly, under these experimental conditions, no tricyclic structure was produced [98]. A different synthetic procedure was reported by Vaillancourt et al. in the year 1992 [99]. The authors described a new synthesis of (-)-CBD via the α-arylation of camphor, achieving both (-)-CBD and (-)-CBD mono methyl ether as shown in Scheme 19 [99].
Particularly, the authors prepared the endo-3-(2,5-dimethoxy-4-n-pentylphenyl)camphor (2), by reacting first olivetol dimethyl ether (2) dissolved in dry THF under nitrogen at -10 °C with tert-butyllithium (tert-BuLi) 1.7 M in hexanes for 3 h under stirring. Then the obtained solution was transferred to a solution of CuI in dry THF at 0 °C and the mixture was stirred for 20 min. Upon dilution with DMSO, the obtained solution was transferred dropwise to a solution of 3,9-dibromocamphor dissolved in dry THF/DMSO at 0 °C, and the reaction was then allowed to warm to room temperature and was stirred overnight. After the proper work-up and removal of the solvent in vacuo, the crude product was chromatographed and recrystallized from EtOH to achieve 2 in 71% yield. Compound 2 was transformed into the vinyl phosphate derivative 3, by dissolving it in dry THF under nitrogen and titrating the obtained solution cooled to -78 °C with a freshly prepared 0.4 M Na-naphthalenide/0.4 M tetra-ethyleneglycol dimethyl ether solution (see later) in THF until a deep green color persisted. The green mixture was then added with diethyl chlorophosphate and hexamethylfosforamide (HMPA), was allowed to warm to -20 °C, and opportunely treated to provide the crude product which was subjected to a short silica column obtaining the desired enol phosphate 3 as a colorless oil (89%). (-)-CBD and (-)-CBD monomethyl ether (4), were finally obtained by adding the vinyl phosphate 3 dissolved in dry THF and tert-butanol (t-BuOH) to an excess of lithium foil in methylamine (MeNH2) at -78 °C. When addition was complete, the reaction was allowed to stir at -10 °C for 1 hour and treated by acidification with HCl 1M. After extraction and removal of organic solvent the crude reaction mixture was chromatographed on neutral alumina, achieving (-)-CBD monomethyl ether in 43 % yield. Further elution afforded (-)-CBD in 35% yield. The 0.4 M Na-naphthalenide/0.4 M tetra-ethylene glycol dimethyl ether solution in THF was prepared adding naphthalene in dry THF with sodium metal. The mixture was allowed to stir for 2 h, and then 2.41 mL of tetra-ethylene glycol dimethyl ether was added. The mixture was allowed to stir an additional hour at room temperature before use (Scheme not reported).
Later in the year 2002, Malkov et al. described the synthesis of (-)-CBD in 14-22% yield using Z-(+)-p-mentha-2, 8-dien-1-ol (1) or its acetate derivative 2 and olivetol in dichloromethane (DCM) and molybdenum catalysts (Scheme 20) [100].
According to the reported results, starting from Z-(+)-p-mentha-2, 8-dien-1-ol (1) and olivetol dissolved in DCM and using the molybdenum Mo (IV) triflate complex as catalyst at -20°C for 3 hours (-)-CBD was obtained in 20% yield. Similar results (22% yield) were obtained starting from Z-(+)-p-mentha-2, 8-dien-1-ol acetate (2), olivetol and the same catalyst, and stirring the reaction mixture at -10°C for 30′. On the contrary, with the bimetallic Mo (II) catalyst V, and stirring 2 and olivetol at 20°C for 4 hours (-)-CBD was obtained in a lower yield (14%). Kobayashi et al. in the year 2001 reported the BF3-promoted 1,4-addition of bulky aryl groups, including dimethoxy olivetol, to an α-iodo enone (2), prepared from the parent enone (1), thus affording a β-aryl-α-iodo ketone derivative (3). Its subsequent reaction with EtMgBr furnished the magnesium enolate (4), which upon reactions with ClP(O)(OEt)2 gave an enol phosphate (5), which was applied successfully to the synthesis of (-)-CBD (Scheme 21) [101].
Particularly, the enone 1 was converted to the α-iodocyclohexenone (2) with I2 and pyridine in CCl4 with good yield. The 1,4-addition of Ar2Cu(CN)Li2 to 2 promoted by BF3·OEt2 furnished ketone 3 in 67% yield, after aqueous workup and purification by chromatography. Then, EtMgBr was successful used to generate the corresponding enolate 4, which provided the enol phosphate 5 by reaction with (EtO)2P(O)Cl in 70% yield (Scheme 21). Methylation of 5 with MeMgBr in the presence of nickel (II) acetylacetonate (Ni(acac)2) afforded 6, and its subsequent exposure to sodium ethyl thiolate (EtSNa) in DMF resulted in the deprotection of the triethylsilil (TES) group and of one of the MeO groups to furnish 7. Attempted one-step deprotection of the two MeO groups under more vigorous conditions was unsuccessful, therefore 7 was converted in (-)-CBD by further exposure to EtSNa in DMF.
Later in 2006, the same group reported a new reagent system for synthesizing (-)-CBD and its analogues via alkenylation of cyclohexenyl diol monoacetate according to Scheme 22 [102].
Briefly, by a nickel-catalyzed allylation of 2-cyclohexene-1,4-diol monoacetate (1) with a new reagent consisting of (alkenyl)ZnCl/TMEDA, the SN2-type product, namely E-(+)-p-mentha-2,8-dien-1-ol (2) was achieved with 94% regioselectivity in good yield. Oxidation of 2 afforded the intermediate enone, which underwent iodination at the α position by I2 in the presence of 2,5-di-tert-butylhydroquinone (DBHQ) as a radical scavenger to produce the α-iodo enone (3) in 63% yield (two steps). Addition of the 2,6-dimethoxy-4-pentylphenyl group of olivetol (abbreviated as Ar in the first part of the Scheme) to 3 was performed with the higher-order cyanocuprate derivative (Ar2Cu(CN)Li2) in turn synthesized from the Aryl (Ar) lithium anion and CuCN (not reported), obtaining compound 4, as a 1:1 stereoisomeric mixture at the α position. Compound 4 underwent reaction with EtMgBr to produce the reactive magnesium enolate 5, which was quenched with ClP(O)(OEt)2 to furnish enol phosphate 6 in 51% yield from 3. Nickel-catalyzed coupling of 6 with MeMgCl afforded dimethyl ether 7 in good yield. Finally, (-)-CBD was obtained upon demethylation of 7 using MeMgI. Zachary et al. in the year 2018 reported a practical synthetic approach to synthetize Δ9-THC, and (-)-CBD. Particularly, (-)-CBD was synthesized according to Scheme 23 [103].
Briefly, olivetol and K2CO3 in acetone were added with dimethyl sulphate (Me2SO4) in 5 min at room temperature and then the mixture was heated to 80 °C for 12 h under argon, achieving the crude olivetol dimethyl ether (1) as an oil which was purified by column chromatography (98% yield). A yellow solution of 1 and TMEDA in anhydrous THF at -78 °C under argon was added with sec-butyllithium (sec-BuLi) and was stirred for 30 min at -78°C and for 60 min at 0 °C, before being added with anhydrous DMF. The mixture was stirred at 0 °C for 30 min and for additional 60 min at room temperature. Upon proper work up and silica gel column chromatography the pure aldehyde derivative 2 was obtained as a yellow oil in 85% yield. Aldehyde 2 was converted in the enone 3 via an aldolic condensation with acetone in water using a 2.5M NaOH solution and heating the reaction mixture to 60 °C for 12 h (89% yield). The carbonylic group of 3 was reduced in toluene at -78 °C under argon, using a solution of (R)-CBS oxazaborolidine ligand (see Scheme 23) and BH3•THF complex. The reaction mixture continued to stir for 30 min at -78 °C obtaining the crude product (-)-4 which was further purified by silica gel column chromatography achieving the pure compound (-)-4 in 94% yield (77% enantiomeric excess (e.e.)) as a clear colorless oil that solidified upon standing. An alternative to generate a product with high enantiopurity consisted of an enzymatic approach using an inexpensive and readily available enzyme. In this regard, compound 3 was reduced with sodium borohydride (NaBH4) affording the racemic alcohol (±)-4, which was acylated with vinyl butyrate in the presence of Savinase 12T thus providing the ester (-)-4.1 which was hydrolyzed with NaOH affording (-)-4 with >98% e.e. in 38% overall yield for the three steps (Scheme 23.1).
Preprints 73680 sch029
Scheme 23. 1. Synthesis of (-)-CBD [103].
Scheme 23. 1. Synthesis of (-)-CBD [103].
Preprints 73680 sch029
Compound (-)-4 was converted in the carboxylate (-)-5 by its acylation with 5-methyl-5-hexencarboxylic acid in DCM in the presence of DCC and DMAP. After 1 hour stirring at 0°C and then overnight at room temperature, (-)-5 was achieved as crude material which was purified by column chromatography. Compound (-)-5 was treated with KHMDS in anhydrous toluene at -78 °C for 1 hour, then a solution of anhydrous pyridine and tetramethylsilyl chloride (TMS-Cl) in anhydrous toluene was added and the mixture was stirred at -78 °C for 10 min and at room temperature for an additional 4 hours. Upon the Ireland−Claisen rearrangement, compound (+)-6 was achieved as a white crystalline solid that could be recrystallized using hexanes in a 52% overall yield. Treatment of (+)-6 in ether at 0 °C with methyllithium (MeLi) and stirring overnight at room temperature led to the formation of ketone (+)-7 as colorless oil in 71.8% yield, after chromatography column. Compound (+)-7 could be cyclized and then converted into (-)-CBD, via Wittig methylenation and deprotection. Particularly, compound (+)-7 and Grubbs 2nd generation catalyst in DCM were first stirred for a total of 15 h at 40 °C, thus achieving compound (-)-8 in 69.6 % yield. Then, by reaction at room temperature of (-)-8 with bromo(methyl)triphenylphosphorane in THF, followed by the addition of potassium tert-butoxide and stirring at 75°C for 12 h, compound (-)-9 was isolated in 82% yield. After its demethylated in anhydrous ether under argon with MeMgI and heating to 160 °C for 1.5 h, (-)-CBD was obtained in 62% (35% on three steps) yield as a light-yellow oil.
In the year 2020, Gong et al. reported a novel synthetic procedure for making (−)-CBD on a 10 g scale, by a late-stage diversification method, starting from commercially available phloroglucinol. First, the key intermediate (−)-CBD-2OPiv-OTf was achieved which underwent Negishi cross-coupling with the pentyl chain to give (−)-CBD in 52% overall yield. By this approach using the symmetric phloroglucinol the generation of positional isomers (Abn-CBDs) was avoided (Scheme 24) [104].
Preprints 73680 sch024
Scheme 24. Synthesis of (-)-CBD [104].
Scheme 24. Synthesis of (-)-CBD [104].
Preprints 73680 sch024
Briefly, by a Friedel–Crafts alkylation of phloroglucinol with Z-(+)-p-mentha-2,8-dien-1-ol in a ratio of 1:10 in presence of BF3 etherate gave the desired product 1 in an excellent 80% yield. By treatment of 1 with trifluoromethanesulfonic anhydride (Tf2O) in the presence of 2,6-lutidine at −30 to −20 °C in DCM using 1.5 equivalent of 1, to prevent double triflation, afforded the triflate derivative 2, which was isolated by silica gel column chromatography in a 78.1% yield. Compound 2 was treated with a solution of pivaloyl chloride (Piv-Cl) in DCM and a solution of DMAP in pyridine at −10 to 0 °C. Subsequently, the mixture was stirred at 25 °C for 12 h, to obtain the O-protected derivative 3 in 95% yield after column chromatography as a yellow oil. Pentyl zinc chloride (C5H11ZnCl), was prepared in one step by the transmetalation of the correspondent Grignard C5H11MgBr. Particularly, anhydrous zinc chloride and anhydrous lithium chloride were dissolved in anhydrous THF and cooled to −10 °C, added with C5H11MgBr and stirred first at −10 °C for 15 min and then at room temperature for 1.5 hours. The obtained mixture was added with a solution of 3 in THF and then with [1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II) (Pd(dppf)Cl2), as cross-coupling agent, to provide 4 in 90% yield after stirring at 55–60 °C for proper time and after column chromatography. (-)-CBD was finally obtained upon deprotection with MeMgBr (3 M in Et2O) in toluene at 110 °C for 12 h in 99% yield after silica gel column chromatography.
Chiurchiu et al. in the year 2021 reported an innovative and high yielding continuous approach for producing (−)-CBD, strongly reducing its cyclization into THC (traces), thus achieving (-)-CBD in 55% yield. Particularly, by means of flow chemistry, and following their studies concerning the use of this technology for synthesizing highly functionalized materials, the authors inserted acetyl isoperitenol and olivetol dissolved in DCM into a reservoir A, while BF3·Et2O dissolved in DCM into a reservoir B. Subsequently, they pumped the two solutions simultaneously into a T-connector before passing through a 3 mL PTFE coil reactor (7 minutes residence time). The outgoing solution was dropped into a flask containing a stirring saturated solution of NaHCO3 from which (-)-CBD was extracted and purified by silica gel chromatography to provide pure (-)-CBD in 55% yield (Scheme 25) [105].
The main by-products were Abn-CBD and the dialkylated cannabidiol recovered in 19 % and 4 % of yield respectively, THC was observed in traces (GC<0.4 %) and its isolation was unfeasible. In the same year, Navarro et al. followed a practical approach to prepare (-)-CBD that avoided the formation of the side abnormal regio-isomers by using protected 4,6-dihalo-olivetol in coupling reaction as shown in Scheme 26 [53].
Briefly, the synthesis began by the Wittig reaction of butyl phosphonium bromide with commercially available 3,5-dimethoxybenzaldehyde (1), to deliver the olefin derivative 2 as mixture of Z and E isomers, which was conveniently reduced with hydrogen under pressure in presence of Pd/C as catalyst to the olivetol dimethyl ether (3). Regioselective electrophilic aromatic bromination of 3 using 2.3 equivalents of N-bromosuccinimide (NBS) in DCM at room temperature produced exclusively the 4,6-dibrominated product 4 in good yield. Then, the methyl ether-protecting groups were removed with boron tribromide to generate the key resorcinol intermediate 5 which was submitted to the Friedel–Craft alkylation with (1S,4R)-4-isopropenyl-1-methyl-2-cyclohexen-1-ol (6) in DCM, in the presence of PTSA as catalyst, thus affording the adduct 7 as single diastereomer. Finally, reductive dehalogenation using sodium sulfite in the presence of triethylamine (Et3N) in a mixture of MeOH and H2O at 75 °C delivered the targeted cannabinoid (-)-CBD in 43% yield. Anand et al. in the year 2022, developed a three-step concise and stereoselective synthesis route to (−)-CBD) and (+)-CBD, using inexpensive and readily available starting material, such as R-(+)-limonene and S-(-)-limonene respectively. The synthesis involved the diastereoselective bi-functionalization of limonene, followed by effective elimination leading to the generation of the key chiral (+)- or (-)-p-mentha-2,8-dien-1-ols. Such dienols on coupling with olivetol under silver bis (trifluoromethanesulfonyl) imide (AgN(SO2CF3)2) as catalysis provided regiospecific (−)-CBD or (+)-CBD in good yield (Scheme 27) [106].
Briefly, the present approach started with the direct generation of diastereoselective bi-functionalized 2-phenylseleninyl-p-menth-8-en-1-ol (1) from readily available and inexpensive starting material R-(+)-limonene. Particularly, electrophilic phenyl selenium bromide and H2O2 in a mixture acetonitrile/water at – 30°C were used, thus achieving compound 1 in 53% yield. The removal of SePh to synthesize (+)-menthadienol 2 was carried out using Selectfluor in THF at room temperature for 10 hours achieving optically pure (+)-p-mentha-2,8-dien-1-ol 2 in 86% yield. Compound 2 was then coupled with olivetol in DCM using AgN(SO2CF3)2 at room temperature for 10 hours achieving (-)-CBD in 46% yield. Similarly, starting from S-(-)-limonene, (+)-CBD was synthesized. Briefly, the synthesis began from commercially available S-(−)-limonene, which was subjected to stereoselective bifunctionalization and elimination cascade to afford (−)-p-mentha-2,8-dien-1-ol. Pleasingly, (−)-p-mentha-2,8-dien-1-ol on reaction with olivetol in the presence of AgN(SO2CF3)2 afforded the single isomer of (+)-CBD. The last synthetic procedure we report here to obtain (-)-CBD was very recently described by Grimm et al. (Scheme 28) [107].
Briefly, neral (Z-citral) was cyclized to isopiperitrol using imino-imidodiphosphates (iIDP), featuring a bifunctional inner-core system with an acidic P=NHTf moiety and a basic P=O moiety, thus combining excellent reactivity and selectivity, and furnishing (1R,6S)- E-isopiperitenol (1) in good yield (77%) and excellent diastereo- and enantioselectivity. Interestingly, such cyclization can be performed easily on a multigram scale (>4 g) without any loss of selectivity or yield, and catalyst can be recovered in excellent yield (95%) and re-used in further cyclization reactions. Then, direct access to (-)-CBD from isopiperitenol (1) and olivetol was provided in 35% yield under mild conditions using PTSA as catalyst in DCM at room temperature for 5 days. It is noteworthy that no further reaction of (-)-CBD to the corresponding THC was observed.

5. Conclusions and Future Perspective

Here, cannabinoids have been first reviewed in terms of classification, chemical structures, mode of action, main pharmacological properties, current applications, clinical applicability, and antimicrobial properties, according to what reported so far. This approach allowed us to detect the most promising compounds for the development of new efficient antibacterial agents finalized to counteract also MDR strains and deprived of the psychotropic side effects, typical of the well-known THC. From the scenario that arose from this overture, it emerged that CBC, CBG and CBD, known to exclusively possess beneficial non-mind-altering pharmacological effects and reported to have potent antibacterial effects, may be the best candidates for the development of new antibiotics. So, we have systematically reviewed the synthetic pathways utilized for their preparation, thus providing a rich pool of different synthetic procedures, which can enable chemists to produce consistent amounts of these therapeutically promising PCs. We like to think that the present review could be for synthetic chemists, like a cookbook for a cook, where they can choose the most suitable recipe for their resources to prepare one or more of the PCs considered here. An extensive synthetic work supported by this review will afford the material necessary for further studies and will encourage the development of new PCs-based antibiotics. Additionally, although already very potent as such, we think that additional SAR studies, specifically on CBC, CBG and CBD, are needed for detecting how these natural compounds could be modified, in order to converge the plethora of their pharmacological properties only towards the antibacterial one, thus increasing their potency. Moreover, we think that, since these molecules have demonstrated only poor activity on bacteria of Gram-negative species, which are the ones that most endanger public health, proper structural modification could help to enhance their activity on frightening species such as resistant E. coli, P. aeruginosa, Klebsiella supp., Salmonella supp. etc. Surely, starting from synthetic compounds obtainable in good amounts following the procedures reported here, the preparation of new and specialized cannabinoids might help to further elucidate the biological mode of action of cannabinoids on bacteria, which has not still been clarified so far. In fact, although it is recognized that cannabinoids act by impairing the cytoplasmic membrane of bacteria, the mode exploited to damage it remain unveiled. Note that, although a large collection of synthetically prepared cannabinoids has been reported, and the synthetic approaches employed for preparing THC have been systematically reviewed by Bloemendal and colleagues recently, those employed to prepare the not psychotropic CBC, CBG and CBD have not yet been systematically reviewed.

Author Contributions

Conceptualization, investigation, resources, data curation, writing—original draft preparation, writing—review and editing, visualization, supervision, project administration, S.A.; writing—review and editing, A.M.S. and G.C.S. All authors have read and agreed to the published version of the manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Vivas, R.; Barbosa, A.A.T.; Dolabela, S.S.; Jain, S. Multidrug-Resistant Bacteria and Alternative Methods to Control Them: An Overview. Microbial drug resistance (Larchmont, N.Y.), 2019, 25, 890–908. [Google Scholar] [CrossRef] [PubMed]
  2. Mancuso, G.; Midiri, A.; Gerace, E.; Biondo, C. Bacterial Antibiotic Resistance: The Most Critical Pathogens. Pathogens 2021, 10, 1310. [Google Scholar] [CrossRef] [PubMed]
  3. WHO. Antimicrobial resistance. Available online at https://www.who.int/news-room/fact-sheets/detail/antimicrobial-resistance (accessed on 03 May 2023).
  4. Breijyeh, Z.; Karaman, R. Design and Synthesis of Novel Antimicrobial Agents. Antibiotics 2023, 12, 628. [Google Scholar] [CrossRef] [PubMed]
  5. Chancey, S.T.; Zahner, D.; Stephens, D.S. Acquired inducible antimicrobial resistance in Gram-positive bacteria. Future Microbiol. 2012, 7, 959–978, Mahon, C.R.; Lehman, D.C. Textbook of Diagnostic Microbiology—E-Book; Elsevier Health Sciences: USA, 2022. [Google Scholar] [CrossRef] [PubMed]
  6. Spengler, G.; Kincses, A.; Gajdacs, M.; Amaral, L. New Roads Leading to Old Destinations: Efflux Pumps as Targets to Reverse Multidrug Resistance in Bacteria. Molecules 2017, 22, 468, Munita, J.M.; Arias, C.A. Mechanisms of Antibiotic Resistance. Microbiol. Spectr. 2016, 4, 481–511. [Google Scholar] [CrossRef]
  7. Schaenzer, A.J.; Wright, G.D. Antibiotic Resistance by Enzymatic Modification of Antibiotic Targets. Trends Mol. Med. 2020, 26, 768–782. [Google Scholar] [CrossRef] [PubMed]
  8. Wilson, D.N.; Hauryliuk, V.; Atkinson, G.C.; O’Neill, A.J. Target protection as a key antibiotic resistance mechanism. Nat. Rev. Microbiol. 2020, 18, 637–648. [Google Scholar] [CrossRef] [PubMed]
  9. Finley, R.L.; Collignon, P.; Larsson, D.G.; McEwen, S.A.; Li, X.Z.; Gaze, W.H.; Reid-Smith, R.; Timinouni, M.; Graham, D.W.; Topp, E. The scourge of antibiotic resistance: The important role of the environment. Clin. Infect. Dis. Off. Publ. Infect. Dis. Soc. Am. 2013, 57, 704–710. [Google Scholar] [CrossRef]
  10. Guetiya Wadoum, R.E.; Zambou, N.F.; Anyangwe, F.F.; Njimou, J.R.; Coman, M.M.; Verdenelli, M.C.; Cecchini, C.; Silvi, S.; Orpianesi, C.; Cresci, A.; et al. Abusive use of antibiotics in poultry farming in Cameroon and the public health implications. Br. Poult. Sci. 2016, 57, 483–493. [Google Scholar] [CrossRef]
  11. Baynes, R.E.; Dedonder, K.; Kissell, L.; Mzyk, D.; Marmulak, T.; Smith, G.; Tell, L.; Gehring, R.; Davis, J.; Riviere, J.E. Health concerns and management of select veterinary drug residues. Food Chem. Toxicol. Int. J. Publ. Br. Ind. Biol. Res. Assoc. 2016, 88, 112–122. [Google Scholar] [CrossRef]
  12. Radwan, M.M.; Chandra, S.; Gul, S.; ElSohly, M.A. Cannabinoids, Phenolics, Terpenes and Alkaloids of Cannabis. Molecules 2021, 26, 2774. [Google Scholar] [CrossRef] [PubMed]
  13. Tahir, M.N.; Shahbazi, F.; Rondeau-Gagné, S. et al. The biosynthesis of the cannabinoids. J. Cannabis. Res. 2021, 3, 7 (2021). [CrossRef]
  14. Pagano, C.; Navarra, G.; Coppola, L.; Avilia, G.; Bifulco, M.; Laezza, C. Cannabinoids: Therapeutic Use in Clinical Practice. Int. J. Mol. Sci. 2022, 23, 3344. [Google Scholar] [CrossRef]
  15. Palomares, B.; Ruiz-Pino, F.; Garrido-Rodriguez, M.; Eugenia Prados, M.; Sánchez-Garrido, M.A.; Velasco, I.; Vazquez, M.J.; Nadal, X.; Ferreiro-Vera, C.; Morrugares, R.; et al. Tetrahydrocannabinolic Acid A (THCA-A) Reduces Adiposity and Prevents Metabolic Disease Caused by Diet-Induced Obesity. Biochemical Pharmacology 2020, 171, 113693. [Google Scholar] [CrossRef] [PubMed]
  16. Pisanti, S.; Malfitano, A.M.; Ciaglia, E.; Lamberti, A.; Ranieri, R.; Cuomo, G.; Abate, M.; Faggiana, G.; Proto, M.C.; Fiore, D.; et al. Cannabidiol: State of the Art and New Challenges for Therapeutic Applications. Pharmacology & Therapeutics 2017, 175, 133–150. [Google Scholar] [CrossRef]
  17. Farha, M.A.; El-Halfawy, O.M.; Gale, R.T.; MacNair, C.R.; Carfrae, L.A.; Zhang, X.; Jentsch, N.G.; Magolan, J.; Brown, E.D. Uncovering the Hidden Antibiotic Potential of Cannabis. ACS Infect. Dis. 2020, 6, 338–346. [Google Scholar] [CrossRef] [PubMed]
  18. Breijyeh, Z.; Karaman, R. Design and Synthesis of Novel Antimicrobial Agents. Antibiotics 2023, 12, 628. [Google Scholar] [CrossRef] [PubMed]
  19. Blaskovich, M.A.T.; Kavanagh, A.M.; Elliott, A.G.; Zhang, B.; Ramu, S.; Amado, M.; Lowe, G.J.; Hinton, A.O.; Pham, D.M.T.; Zuegg, J.; et al. The antimicrobial potential of cannabidiol. Commun. Biol. 2021, 4, 7. [Google Scholar] [CrossRef] [PubMed]
  20. Kosgodage, U.S.; Matewele, P.; Awamaria, B.; Kraev, I.; Warde, P.; Mastroianni, G.; Nunn, A.V.; Guy, G.W.; Bell, J.D.; Inal, J.M.; et al. Cannabidiol Is a Novel Modulator of Bacterial Membrane Vesicles. Front. Cell. Infect. Microbiol. 2019, 9, 324. [Google Scholar] [CrossRef]
  21. Luz-Veiga, M.; Amorim, M.; Pinto-Ribeiro, I.; Oliveira, A.L.S.; Silva, S.; Pimentel, L.L.; Rodríguez-Alcalá, L.M.; Madureira, R.; Pintado, M.; Azevedo-Silva, J.; Fernandes, J. Cannabidiol and Cannabigerol Exert Antimicrobial Activity without Compromising Skin Microbiota. Int. J. Mol. Sci. 2023, 24, 2389. [Google Scholar] [CrossRef]
  22. Wu, Q.; Guo, M.; Zou, L.; Wang, Q.; Xia, Y. 8,9-Dihydrocannabidiol, an Alternative of Cannabidiol, Its Preparation, Antibacterial and Antioxidant Ability. Molecules 2023, 28, 445. [Google Scholar] [CrossRef]
  23. Gildea, L.; Ayariga, J.A.; Xu, J.; Villafane, R.; Robertson, B.K.; Samuel-Foo, M.; Ajayi, O.S. Cannabis sativa CBD Extract Exhibits Synergy with Broad-Spectrum Antibiotics against Salmonella enterica subsp. Enterica serovar typhimurium. Microorganisms 2022, 10, 2360. [Google Scholar] [CrossRef] [PubMed]
  24. CBG: The mother of all Cannabinoids with broad antibacterial activity. Available online at https://www.openaccessgovernment.org/cbg-the-mother-of-all-cannabinoids-with-broad-antibacterial-activity/95824/ (accessed on 03 May 2023).
  25. Earlenbaugh, E. What are cannabinoids? Available online at https://cannigma.com/plant/cannabinoids-and-their-effects/#easy-footnote-bottom-10-283 (accessed on 03 May 2023).
  26. Vučković, S.; Srebro, D.; Vujović, K.S.; Vučetić, Č.; Prostran, M. Cannabinoids and Pain: New Insights From Old Molecules. Frontiers in pharmacology, 2018, 9, 1259. [Google Scholar] [CrossRef] [PubMed]
  27. Lafaye, G.; Karila, L.; Blecha, L.; Benyamina, A. Cannabis, Cannabinoids, and Health. Dialogues in Clinical Neuroscience 2017, 19, 309–316. [Google Scholar] [CrossRef] [PubMed]
  28. Berman, P.; Futoran, K.; Lewitus, G.M.; Mukha, D.; Benami, M.; Shlomi, T.; Meiri, D. A New ESI-LC/MS Approach for Comprehensive Metabolic Profiling of Phytocannabinoids in Cannabis. Scientific Reports 2018, 8, 14280. [Google Scholar] [CrossRef] [PubMed]
  29. Fraguas-Sánchez, A.I.; Fernández-Carballido, A.; Torres-Suárez, A.I. Phyto-, Endo- and Synthetic Cannabinoids: Promising Chemotherapeutic Agents in the Treatment of Breast and Prostate Carcinomas. Expert Opinion on Investigational Drugs 2016, 25, 1311–1323. [Google Scholar] [CrossRef]
  30. GERTSCH, J.; RADUNER, S.; ALTMANN, K.-H. New Natural Noncannabinoid Ligands for Cannabinoid Type-2 (CB2) Receptors. Journal of Receptors and Signal Transduction 2006, 26, 709–730. [Google Scholar] [CrossRef]
  31. Li, X.; Chang, H.; Bouma, J.; de Paus, L.V.; Mukhopadhyay, P.; Paloczi, J.; Mustafa, M.; van der Horst, C.; Kumar, S.S.; Wu, L.; et al. Structural Basis of Selective Cannabinoid CB2 Receptor Activation. Nature Communications 2023, 14, 1447. [Google Scholar] [CrossRef]
  32. Lambert, D.M. Pharmacologic Targeting of the CB2 Cannabinoid Receptor for Application in Centrally-Mediated Chronic Pain. Text, 2019. University of British Columbia. Retrieved from https://open.library.ubc.ca/collections/ubctheses/24/items/1.0376050.
  33. Fezza, F.; Bari, M.; Florio, R.; Talamonti, E.; Feole, M.; Maccarrone, M. Endocannabinoids, Related Compounds and Their Metabolic Routes. Molecules 2014, 19, 17078–17106. [Google Scholar] [CrossRef]
  34. What Is Cannabicyclolic Acid? Available online at https://leafwell.com/blog/cannabicyclolic-acid/ (accessed on 03 May 2023).
  35. Cannabicyclol. Available online at https://en.wikipedia.org/wiki/Cannabicyclol (accessed on 03 May 2023).
  36. Schwilke, E.W.; Schwope, D.M.; Karschner, E.L.; Lowe, R.H.; Darwin, W.D.; Kelly, D.L.; Goodwin, R.S.; Gorelick, D.A.; Huestis, M.A. Δ9-Tetrahydrocannabinol (THC), 11-Hydroxy-THC, and 11-Nor-9-Carboxy-THC Plasma Pharmacokinetics during and after Continuous High-Dose Oral THC. Clinical Chemistry 2009, 55, 2180–2189. [Google Scholar] [CrossRef]
  37. Dronabinol. Available online at https://en.wikipedia.org/wiki/Dronabinol (accessed on 03 May 2023).
  38. (R)-(+)-Methanandamide. Available online at https://www.tocris.com/products/r-methanandamide_1121 (accessed on 03 May 2023).
  39. Cannabinor. Available online at https://en.wikipedia.org/wiki/Cannabinor. (accessed on 03 May 2023).
  40. HU-2010. Available online at https://en.wikipedia.org/wiki/HU-210. (accessed on 03 May 2023).
  41. L-759,656. Available online at https://www.chemspider.com/Chemical-Structure.4470735.html. (accessed on 03 May 2023).
  42. WIN 55,212-2. Available online at https://en.wikipedia.org/wiki/WIN_55,212-2. (accessed on 03 May 2023).
  43. JHW-015. Available online at https://www.chemspider.com/Chemical-Structure.3480676.html?rid=d64c760a-20a4-46ff-8e28-1de7539e1125. (accessed on 03 May 2023).
  44. Pravadoline. Available online at https://en.wikipedia.org/wiki/Pravadoline. (accessed on 03 May 2023).
  45. Abadji, V.; Lin, S.; Taha, G.; Griffin, G.; Stevenson, L.A.; Pertwee, R.G.; Makriyannis, A. (R)-Methanandamide: A Chiral Novel Anandamide Possessing Higher Potency and Metabolic Stability. Journal of Medicinal Chemistry 1994, 37(12), 1889–1893. [Google Scholar] [CrossRef]
  46. WIN 55212-2. Available online at https://pubchem.ncbi.nlm.nih.gov/compound/5311501. (accessed on 03 May 2023).
  47. JWH-133. Available online at https://pubchem.ncbi.nlm.nih.gov/compound/6918505. (accessed on 03 May 2023).
  48. Delta-11-Tetrahydrocannabinol. Available online at https://en.wikipedia.org/wiki/Delta-11-Tetrahydrocannabinol#:~:text=Delta-11-Tetrahydrocannabinol%20%28Delta-11-THC%2C%20%CE%9411-THC%2C%20%CE%949%20%2811%29-THC%2C%20exo-Tetrahydrocannabinol%29%20is%20a,though%20only%20the%20%286aR%2C%2010aR%29%20enantiomer%20is%20known. (accessed on 03 May 2023).
  49. Engels, F.K.; de Jong, F.A.; Mathijssen, R.H.J.; Erkens, J.A.; Herings, R.M.; Verweij, J. Medicinal Cannabis in Oncology. European Journal of Cancer 2007, 43, 2638–2644. [Google Scholar] [CrossRef] [PubMed]
  50. Ward, S.J.; McAllister, S.D.; Kawamura, R.; Murase, R.; Neelakantan, H.; Walker, E.A. Cannabidiol Inhibits Paclitaxel-Induced Neuropathic Pain through 5-HT1A Receptors without Diminishing Nervous System Function or Chemotherapy Efficacy. British Journal of Pharmacology 2014, 171, 636–645. [Google Scholar] [CrossRef] [PubMed]
  51. Sativex spray. Available online at https://www.my-personaltrainer.it/Foglietti-illustrativi/Sativex.html. (accessed on 03 May 2023).
  52. Reddy, D.S.; Golub, M.V. The Pharmacological Basis of Cannabis Therapy for Epilepsy. J Pharmacol Exp Ther 2016, 357, 45. [Google Scholar] [CrossRef] [PubMed]
  53. Navarro, G.; Gonzalez, A.; Sánchez-Morales, A.; Casajuana-Martin, N.; Gómez-Ventura, M.; Cordomí, A.; Busqué, F.; Alibés, R.; Pardo, L.; Franco, R. Design of Negative and Positive Allosteric Modulators of the Cannabinoid CB2 Receptor Derived from the Natural Product Cannabidiol. J. Med. Chem. 2021, 64, 9354–9364. [Google Scholar] [CrossRef] [PubMed]
  54. Rimonabant. Available online at https://it.wikipedia.org/wiki/Rimonabant. (accessed on 03 May 2023).
  55. Karas, J.A.; Wong, L.J.M.; Paulin, O.K.A.; Mazeh, A.C.; Hussein, M.H.; Li, J.; Velkov, T. The Antimicrobial Activity of Cannabinoids. Antibiotics 2020, 9, 406. [Google Scholar] [CrossRef] [PubMed]
  56. Stone, N.L.; Murphy, A.J.; England, T.J.; O’Sullivan, S.E. A Systematic Review of Minor Phytocannabinoids with Promising Neuroprotective Potential. British Journal of Pharmacology 2020, 177, 4330–4352. [Google Scholar] [CrossRef] [PubMed]
  57. Walsh, K.B.; McKinney, A.E.; Holmes, A.E. Minor Cannabinoids: Biosynthesis, Molecular Pharmacology and Potential Therapeutic Uses. Frontiers in Pharmacology 2021, 12. [Google Scholar] [CrossRef]
  58. van Klingeren, B.; ten Ham, M. Antibacterial Activity of Δ9-Tetrahydrocannabinol and Cannabidiol. Antonie van Leeuwenhoek 1976, 42, 9–12. [Google Scholar] [CrossRef]
  59. Appendino, G.; Gibbons, S.; Giana, A.; Pagani, A.; Grassi, G.; Stavri, M.; Smith, E.; Rahman, M.M. Antibacterial cannabinoids from Cannabis sativa: A structure-activity study. J. Nat. Prod. 2008, 71, 1427–1430. [Google Scholar] [CrossRef]
  60. Martinenghi, L.D.; Jønsson, R.; Lund, T.; Jenssen, H. Isolation, purification, and antimicrobial characterization of cannabidiolic acid and cannabidiol from Cannabis sativa L. Biomolecules 2020, 10, 900. [Google Scholar] [CrossRef]
  61. Wu, Q.; Guo, M.; Zou, L.; Wang, Q.; Xia, Y. 8,9-Dihydrocannabidiol, an Alternative of Cannabidiol, Its Preparation, Antibacterial and Antioxidant Ability. Molecules 2023, 28, 445. [Google Scholar] [CrossRef] [PubMed]
  62. Wassmann, C.S.; Højrup, P.; Klitgaard, J.K. Cannabidiol Is an Effective Helper Compound in Combination with Bacitracin to Kill Gram-Positive Bacteria. Scientific Reports 2020, 10, 4112. [Google Scholar] [CrossRef] [PubMed]
  63. Turner, C.E.; Elsohly,M. A. Biological activity of cannabichromene, its homologs and isomers. J. Clin. Pharmacol. 1981, 21, 283s–291s. [Google Scholar] [CrossRef] [PubMed]
  64. Aqawi, M.; Sionov, R.V.; Gallily, R.; Friedman, M.; Steinberg, D. Anti-Bacterial Properties of Cannabigerol Toward Streptococcus Mutans. Frontiers in Microbiology 2021, 12. [Google Scholar] [CrossRef] [PubMed]
  65. Elsohly, H.N.; Turner, C.E.; Clark, A.M.; Elsohly, M.A. Synthesis and Antimicrobial Activities of Certain Cannabichromene and Cannabigerol Related Compounds. Journal of Pharmaceutical Sciences 1982, 71, 1319–1323. [Google Scholar] [CrossRef] [PubMed]
  66. Feldman, M.; Smoum, R.; Mechoulam, R.; Steinberg, D. Antimicrobial potential of endocannabinoid and endocannabinoid-like compounds against methicillin-resistant Staphylococcus aureus. Sci. Rep. 2018, 8, 17696. [Google Scholar] [CrossRef]
  67. CLSI. Available online at https://clsi.org/. (accessed on 03 May 2023).
  68. Kosgodage, U.S.; Matewele, P.; Awamaria, B.; Kraev, I.; Warde, P.; Mastroianni, G.; Nunn, A.V.; Guy, G.W.; Bell, J.D.; Inal, J.M.; et al. Cannabidiol Is a novel modulator of bacterial membrane vesicles. Front. Cell. Infect. Microbiol. 2019, 9, 324. [Google Scholar] [CrossRef]
  69. Seccamani, P.; Franco, C.; Protti, S.; Porta, A.; Profumo, A.; Caprioglio, D.; Salamone, S.; Mannucci, B.; Merli, D. Photochemistry of Cannabidiol (CBD) Revised. A Combined Preparative and Spectrometric Investigation. J. Nat. Prod. 2021, 84, 2858–2865. [Google Scholar] [CrossRef]
  70. Luo, G.-Y.W. , Hao; Tang, Yu; Li, Hui; Yeom, Hyun-Suk; Yang, Ka; Hsung, Richard P. A Total Synthesis of (±)-Rhododaurichromanic Acid A via an Oxa-[3+3] Annulation of Resorcinols. Synthesis 2015, 47, 2713–2720. [Google Scholar] [CrossRef]
  71. Lodewyk, M.W.; Lui, V.G.; Tantillo, D.J. Synthesis of (Sulfonyl)Methylphosphonate Analogs of Prenyl Diphosphates. Tetrahedron Letters 2010, 51, 170–173. [Google Scholar] [CrossRef]
  72. Yeom, H.-S.; Li, H.; Tang, Y.; Hsung, R.P. Total Syntheses of Cannabicyclol, Clusiacyclol A and B, Iso-Eriobrucinol A and B, and Eriobrucinol. Org. Lett. 2013, 15, 3130–3133. [Google Scholar] [CrossRef] [PubMed]
  73. Crombie, L.; Ponsford, R.; Shani, A.; Yagnitinsky, B.; Mechoulam, R. Hashish Components. Photochemical Production of Cannabicyclol from Cannabichromene. Tetrahedron Letters 1968, 9, 5771–5772. [Google Scholar] [CrossRef] [PubMed]
  74. Schafroth, M.A.; Mazzoccanti, G.; Reynoso-Moreno, I.; Erni, R.; Pollastro, F.; Caprioglio, D.; Botta, B.; Allegrone, G.; Grassi, G.; Chicca, A.; et al. Δ9-Cis-Tetrahydrocannabinol: Natural Occurrence, Chirality, and Pharmacology. J. Nat. Prod. 2021, 84, 2502–2510. [Google Scholar] [CrossRef] [PubMed]
  75. Anderson, L.L.; Ametovski, A.; Lin Luo, J.; Everett-Morgan, D.; McGregor, I.S.; Banister, S.D.; Arnold, J.C. Cannabichromene, Related Phytocannabinoids, and 5-Fluoro-Cannabichromene Have Anticonvulsant Properties in a Mouse Model of Dravet Syndrome. ACS Chem. Neurosci. 2021, 12, 330–339. [Google Scholar] [CrossRef] [PubMed]
  76. Lee, Y.R.; Wang, X. Concise Synthesis of Biologically Interesting (′)-Cannabichromene, (′)-Cannabichromenic Acid, and (′)-Daurichromenic Acid. Bulletin of The Korean Chemical Society 2005, 26, 1933–1936. [Google Scholar] [CrossRef]
  77. Tietze, L.-F.V.K. , Günter; Berger, Bernhard A New Method of Aromatization of Cyclohexenone Derivatives; Synthesis of Cannabichromene. Synthesis 1982, 8, 683–684. [Google Scholar] [CrossRef]
  78. Eisohly, M.A.; Boeren, E.G.; Turner, C.E. Constituents of Cannabis Sativa L. An Improved Method for the Synthesis of Dl-Cannabichromene. Journal of Heterocyclic Chemistry 1978, 15, 699–700. [Google Scholar] [CrossRef]
  79. Quílez del Moral, J.F.; Ruiz Martínez, C.; Pérez del Pulgar, H.; Martín González, J.E.; Fernández, I.; López-Pérez, J.L.; Fernández-Arteaga, A.; Barrero, A.F. Synthesis of Cannabinoids: “In Water” and “On Water” Approaches: Influence of SDS Micelles. J. Org. Chem. 2021, 86, 3344–3355. [Google Scholar] [CrossRef]
  80. Yamaguchi, S.; Shouji, N.; Kuroda, K. A New Approach to Dl-Cannabichromene. BCSJ 1995, 68, 305–308. [Google Scholar] [CrossRef]
  81. Gaoni, Y.; Mechoulam, R. The Structure and Synthesis of Cannabigerol, a New Hashish Constituent. Proceedings of the Chemical Society, 1964, March, 82.
  82. Mechoulam, R.; Yagen, B. Stereoselective Cyclizations of Cannabinoid 1,5 Dienes. Tetrahedron Letters 1969, 10, 5349–5352. [Google Scholar] [CrossRef]
  83. Taura, F.; Morimoto, S.; Shoyama, Y. Purification and Characterization of Cannabidiolic-Acid Synthase from Cannabis Sativa L.: Biochemical analysis of a novel enzyme that catalyzes the oxidocyclization of cannabigerolic acid to cannabidiolic acid. Journal of Biological Chemistry 1996, 271, 17411–17416. [Google Scholar] [CrossRef]
  84. Baek, S.H.; Srebnik, M.; Mechoulam, R. Boron Trifluoride Etherate on Alumina ― a Modified Lewis Acid Reagent. An Improved Synthesis of Cannabidiol. Tetrahedron Letters 1985, 26, 1083–1086. [Google Scholar] [CrossRef]
  85. Baek, S.-H.; Yook, C.N.; Han, D.S. Boron trifluoride etherate on alumina - a modified Lewis acid reagent(V) a convenient single-step synthesis of cannabinoids. Bulletin of the Korean Chemical Society 1995, 16(3), 293–296. [Google Scholar]
  86. Baek, S.-H.; Du Han, S.; Yook, C.N.; Kim, Y.C.; Kwak, J.S. Synthesis and Antitumor Activity of Cannabigerol. Archives of Pharmacal Research 1996, 19, 228–230. [Google Scholar] [CrossRef]
  87. Kumano, T.; Richard, S.B.; Noel, J.P.; Nishiyama, M.; Kuzuyama, T. Chemoenzymatic Syntheses of Prenylated Aromatic Small Molecules Using Streptomyces Prenyltransferases with Relaxed Substrate Specificities. Bioorganic & Medicinal Chemistry 2008, 16, 8117–8126. [Google Scholar] [CrossRef]
  88. Jentsch, N.G.; Zhang, X.; Magolan, J. Efficient Synthesis of Cannabigerol, Grifolin, and Piperogalin via Alumina-Promoted Allylation. J. Nat. Prod. 2020, 83, 2587–2591. [Google Scholar] [CrossRef] [PubMed]
  89. Curtis, B.J.; Micikas, R.J.; Burkhardt, R.N.; Smith, R.A.; Pan, J.Y.; Jander, K.; Schroeder, F.C. Syntheses of Amorfrutins and Derivatives via Tandem Diels–Alder and Anionic Cascade Approaches. J. Org. Chem. 2021, 86, 11269–11276. [Google Scholar] [CrossRef]
  90. Mechoulam, R.; Gaoni, Y. A Total Synthesis of Dl-Δ1-Tetrahydrocannabinol, the Active Constituent of Hashish1. J. Am. Chem. Soc. 1965, 87, 3273–3275. [Google Scholar] [CrossRef]
  91. Petrzilka, T.; Haefliger, W.; Sikemeier, C.; Ohloff, G.; Eschenmoser, A. Synthese Und Chiralität Des (-)-Cannabidiols Vorläufige Mitteilung. Helvetica Chimica Acta 1967, 50, 719–723. [Google Scholar] [CrossRef]
  92. Petrzilka, T.; Haefliger, W.; Sikemeier, C. Synthese von Haschisch-Inhaltsstoffen. 4. Mitteilung. Helvetica Chimica Acta 1969, 52, 1102–1134. [Google Scholar] [CrossRef]
  93. Razdan, R.K.; Dalzell, H.C.; Handrick, G.R. Hashish. X. Simple One-Step Synthesis of (-)-.DELTA.1-Tetrahydrocannabinol (THC) from p-Mentha-2,8-Dien-1-Ol and Olivetol. J. Am. Chem. Soc. 1974, 96, 5860–5865. [Google Scholar] [CrossRef] [PubMed]
  94. Papahatjis, D.P.; Nikas, S.P.; Andreou, T.; Makriyannis, A. Novel 1′,1′-Chain Substituted Δ8-Tetrahydrocannabinols. Bioorganic & Medicinal Chemistry Letters 2002, 12, 3583–3586. [Google Scholar]
  95. Uliss, D.B.; Dalzell, H.C.; Handrick, G.R.; Howes, J.F.; Razdan, R.K. Hashish. Importance of the Phenolic Hydroxyl Group in Tetrahydrocannabinols. J. Med. Chem. 1975, 18, 213–215. [Google Scholar] [CrossRef] [PubMed]
  96. Crombie, L.; Crombie, W.M.L.; Jamieson, S.V.; Palmer, C.J. Acid-Catalysed Terpenylations of Olivetol in the Synthesis of Cannabinoids. J. Chem. Soc., Perkin Trans. 1 1988, 1243–1250. [CrossRef]
  97. Kinney, W.A.; McDonnell, M.E.; Zhong, H.M.; Liu, C.; Yang, L.; Ling, W.; Qian, T.; Chen, Y.; Cai, Z.; Petkanas, D.; et al. Discovery of KLS-13019, a Cannabidiol-Derived Neuroprotective Agent, with Improved Potency, Safety, and Permeability. ACS Med. Chem. Lett. 2016, 7, 424–428. [Google Scholar] [CrossRef] [PubMed]
  98. Villano, R.; Straker, H.; Di Marzo, V. Short and Efficient Synthesis of Alkylresorcinols: A Route for the Preparation of Cannabinoids. New J. Chem. 2022, 46, 20664–20668. [Google Scholar] [CrossRef]
  99. Vaillancourt, V.; Albizati, K.F. A One-Step Method for the.Alpha.-Arylation of Camphor. Synthesis of (-)-Cannabidiol and (-)-Cannabidiol Dimethyl Ether. J. Org. Chem. 1992, 57, 3627–3631. [Google Scholar] [CrossRef]
  100. Malkov, A.; Kocovsky, P. Tetrahydrocannabinol Revisited: Synthetic Approaches Utilizing Molybdenum Catalysts. Collect. Czech. Chem. Commun. 2001, 66, 1257−1268.
  101. William, A.D.; Kobayashi, Y. A Method To Accomplish a 1,4-Addition Reaction of Bulky Nucleophiles to Enones and Subsequent Formation of Reactive Enolates. Org. Lett. 2001, 3, 2017–2020. [Google Scholar] [CrossRef]
  102. Kobayashi, Y.; Takeuchi, A.; Wang, Y.-G. Synthesis of Cannabidiols via Alkenylation of Cyclohexenyl Monoacetate. Org. Lett. 2006, 8, 2699–2702. [Google Scholar] [CrossRef]
  103. Shultz, Z.P.; Lawrence, G.A.; Jacobson, J.M.; Cruz, E.J.; Leahy, J.W. Enantioselective Total Synthesis of Cannabinoids—A Route for Analogue Development. Org. Lett. 2018, 20, 381–384. [Google Scholar] [CrossRef]
  104. Gong, X.; Sun, C.; Abame, M.A.; Shi, W.; Xie, Y.; Xu, W.; Zhu, F.; Zhang, Y.; Shen, J.; Aisa, H.A. Synthesis of CBD and Its Derivatives Bearing Various C4′-Side Chains with a Late-Stage Diversification Method. J. Org. Chem. 2020, 85, 2704–2715. [Google Scholar] [CrossRef]
  105. Chiurchiù, E.; Sampaolesi, S.; Allegrini, P.; Ciceri, D.; Ballini, R.; Palmieri, A. A Novel and Practical Continuous Flow Chemical Synthesis of Cannabidiol (CBD) and Its CBDV and CBDB Analogues. European Journal of Organic Chemistry 2021, 2021, 1286–1289. [Google Scholar] [CrossRef]
  106. Anand, R.; Cham, P.S.; Gannedi, V.; Sharma, S.; Kumar, M.; Singh, R.; Vishwakarma, R.A.; Singh, P.P. Stereoselective Synthesis of Nonpsychotic Natural Cannabidiol and Its Unnatural/Terpenyl/Tail-Modified Analogues. J. Org. Chem. 2022, 87, 4489–4498. [Google Scholar] [CrossRef] [PubMed]
  107. Grimm, J.A.A.; Zhou, H.; Properzi, R.; Leutzsch, M.; Bistoni, G.; Nienhaus, J.; List, B. Catalytic Asymmetric Synthesis of Cannabinoids and Menthol from Neral. Nature 2023, 615, 634–639. [Google Scholar] [CrossRef] [PubMed]
Preprints 73680 g001
Figure 1. Mechanisms by which pathogens can become resistant.
Figure 1. Mechanisms by which pathogens can become resistant.
Preprints 73680 g001
Preprints 73680 g002
Figure 2. Chemical structure of the main PCs found in C. sativa acting on CB1 and/or CB2 receptors.
Figure 2. Chemical structure of the main PCs found in C. sativa acting on CB1 and/or CB2 receptors.
Preprints 73680 g002
Preprints 73680 g003
Figure 3. Chemical structure of the main ECs found in humans acting on CB1 and/or CB2 receptors.
Figure 3. Chemical structure of the main ECs found in humans acting on CB1 and/or CB2 receptors.
Preprints 73680 g003
Preprints 73680 g004
Figure 4. Aspects of humans’ life regulated by the ECS, through the interaction of ECs with receptors CB1 and/or CB2.
Figure 4. Aspects of humans’ life regulated by the ECS, through the interaction of ECs with receptors CB1 and/or CB2.
Preprints 73680 g004
Preprints 73680 g005
Figure 5. Chemical structure of two THC metabolites (11-NCTHC and 11-HTHC) and of two products deriving from CBCA degradation.
Figure 5. Chemical structure of two THC metabolites (11-NCTHC and 11-HTHC) and of two products deriving from CBCA degradation.
Preprints 73680 g005
Preprints 73680 g006
Figure 6. Structure of some SCs capable to act on CB1 and/or CB2 receptors.
Figure 6. Structure of some SCs capable to act on CB1 and/or CB2 receptors.
Preprints 73680 g006
Preprints 73680 g007
Figure 7. Biosynthetic pathway starting from CBGA and leading to the five major PCs. This image has been created by the authors exploiting information available online at https://www.openaccessgovernment.org/cbg-the-mother-of-all-cannabinoids-with-broad-antibacterial-activity/95824/ (accessed on 03 May 2023).
Figure 7. Biosynthetic pathway starting from CBGA and leading to the five major PCs. This image has been created by the authors exploiting information available online at https://www.openaccessgovernment.org/cbg-the-mother-of-all-cannabinoids-with-broad-antibacterial-activity/95824/ (accessed on 03 May 2023).
Preprints 73680 g007
Preprints 73680 g008
Figure 8. Pharmacological properties of some relevant major and minor PCs.
Figure 8. Pharmacological properties of some relevant major and minor PCs.
Preprints 73680 g008
Preprints 73680 g009
Figure 9. Percentages of pharmacological properties possessed by some major and minor cannabinoids.
Figure 9. Percentages of pharmacological properties possessed by some major and minor cannabinoids.
Preprints 73680 g009
Preprints 73680 g010
Figure 10. SCs reported in Table 4 whose chemical structure was not reported previously. Abn-CBD and Abn-CBG are defined as orto-isomers of para-derivatives CBD and CBG, being the orto- and para-positions those reciprocals to the pentyl chain.
Figure 10. SCs reported in Table 4 whose chemical structure was not reported previously. Abn-CBD and Abn-CBG are defined as orto-isomers of para-derivatives CBD and CBG, being the orto- and para-positions those reciprocals to the pentyl chain.
Preprints 73680 g010
Preprints 73680 sch001
Scheme 1. Synthesis of geranyl pyrophosphate (GPP) from dimethylallyl pyrophosphate (DMAPP) and isopentenyl pyrophosphate (IPP) catalyzed by geranyl pyrophosphate synthase.
Scheme 1. Synthesis of geranyl pyrophosphate (GPP) from dimethylallyl pyrophosphate (DMAPP) and isopentenyl pyrophosphate (IPP) catalyzed by geranyl pyrophosphate synthase.
Preprints 73680 sch001
Preprints 73680 sch002
Scheme 2. Biosynthesis of not psychotropic cannabinoids CBG, CBD and CBC, including the formation of the three by-products pentyl diacetic lactone (PDAL), hexanoyl triacetic acid lactone (HTAL), and olivetol.
Scheme 2. Biosynthesis of not psychotropic cannabinoids CBG, CBD and CBC, including the formation of the three by-products pentyl diacetic lactone (PDAL), hexanoyl triacetic acid lactone (HTAL), and olivetol.
Preprints 73680 sch002
Preprints 73680 sch003
Scheme 3. Synthetic procedure to achieve CBC [69]. Ac2O = acetic anhydride; EtOAc = ethyl acetate.
Scheme 3. Synthetic procedure to achieve CBC [69]. Ac2O = acetic anhydride; EtOAc = ethyl acetate.
Preprints 73680 sch003
Preprints 73680 sch004
Scheme 4. Synthetic procedure to achieve either CBC in basic conditions or THC in acidic ones [74].
Scheme 4. Synthetic procedure to achieve either CBC in basic conditions or THC in acidic ones [74].
Preprints 73680 sch004
Preprints 73680 sch005
Scheme 5. Synthesis of CBC [75].
Scheme 5. Synthesis of CBC [75].
Preprints 73680 sch005
Preprints 73680 sch006
Scheme 6. Synthesis of CBC [77].
Scheme 6. Synthesis of CBC [77].
Preprints 73680 sch006
Preprints 73680 sch007
Scheme 7. Synthesis of CBC [79].
Scheme 7. Synthesis of CBC [79].
Preprints 73680 sch007
Preprints 73680 sch008
Scheme 8. Synthesis of CBC [80].
Scheme 8. Synthesis of CBC [80].
Preprints 73680 sch008
Preprints 73680 sch009
Scheme 9. Synthesis of CBG [81].
Scheme 9. Synthesis of CBG [81].
Preprints 73680 sch009
Preprints 73680 sch010
Scheme 10. Synthesis of CBG [82].
Scheme 10. Synthesis of CBG [82].
Preprints 73680 sch010
Preprints 73680 sch011
Scheme 11. Synthesis of CBG [17].
Scheme 11. Synthesis of CBG [17].
Preprints 73680 sch011
Preprints 73680 sch012
Scheme 12. Synthesis of CBG [84]. Silica =Si2O3.
Scheme 12. Synthesis of CBG [84]. Silica =Si2O3.
Preprints 73680 sch012
Preprints 73680 sch013
Scheme 13. Synthesis of CBG [88].
Scheme 13. Synthesis of CBG [88].
Preprints 73680 sch013
Preprints 73680 sch014
Scheme 14. Synthesis of CBG [89].
Scheme 14. Synthesis of CBG [89].
Preprints 73680 sch014
Preprints 73680 sch015
Scheme 15. Synthesis of CBG [69].
Scheme 15. Synthesis of CBG [69].
Preprints 73680 sch015
Preprints 73680 sch016
Scheme 16. Synthesis of (-)-CBD [84]. Alumina = Al2O3.
Scheme 16. Synthesis of (-)-CBD [84]. Alumina = Al2O3.
Preprints 73680 sch016
Preprints 73680 sch017
Scheme 17. Synthesis of (-)-CBD [96].
Scheme 17. Synthesis of (-)-CBD [96].
Preprints 73680 sch017
Preprints 73680 sch018
Scheme 18. Synthesis of (-)-CBD [96].
Scheme 18. Synthesis of (-)-CBD [96].
Preprints 73680 sch018
Preprints 73680 sch019
Scheme 19. Synthesis of (-)-CBD [99].
Scheme 19. Synthesis of (-)-CBD [99].
Preprints 73680 sch019
Preprints 73680 sch020
Scheme 20. Synthesis of (-)-CBD [100].
Scheme 20. Synthesis of (-)-CBD [100].
Preprints 73680 sch020
Preprints 73680 sch021
Scheme 21. Synthesis of (-)-CBD [101]. Ni(acac)2 = nickel (II) acetylacetonate.
Scheme 21. Synthesis of (-)-CBD [101]. Ni(acac)2 = nickel (II) acetylacetonate.
Preprints 73680 sch021
Preprints 73680 sch022
Scheme 22. Synthesis of (-)-CBD [102].
Scheme 22. Synthesis of (-)-CBD [102].
Preprints 73680 sch022
Preprints 73680 sch023
Scheme 23. Synthesis of (-)-CBD [103].
Scheme 23. Synthesis of (-)-CBD [103].
Preprints 73680 sch023
Preprints 73680 sch025
Scheme 25. Synthesis of (-)-CBD [105].
Scheme 25. Synthesis of (-)-CBD [105].
Preprints 73680 sch025
Preprints 73680 sch026
Scheme 26. Synthesis of (-)-CBD [53].
Scheme 26. Synthesis of (-)-CBD [53].
Preprints 73680 sch026
Preprints 73680 sch027
Scheme 27. Synthesis of (-)-CBD [106].
Scheme 27. Synthesis of (-)-CBD [106].
Preprints 73680 sch027
Preprints 73680 sch028
Scheme 28. Synthesis of (-)-CBD [107].
Scheme 28. Synthesis of (-)-CBD [107].
Preprints 73680 sch028
Table 1. Strategies for combating antibiotic resistance.
Table 1. Strategies for combating antibiotic resistance.
Strategies for combating antibiotic resistance
Nanotechnology Quality by design (QbD) approach
Computational methods In silico modelling
Fragment-based drug design (FBDD)
Antibiotic alternatives Antimicrobial peptides (AMPs)
Essential oils
Anti-Quorum Sensing (QS)
Darobactins
Vitamin B6
Bacteriophages
Odilorhabdins
18-β-glycyrrhetinic acid
Cannabinoids
Drug reproposing Ticagrelor
Mitomycin C (MMC)
Auranofin
Pentamidine
Zidovudine (AZT)
Synthesis of novel antibacterial agents Lactones
Piperidinol
Sugar-based bactericides
Isoxazole derivatives
Carbazole
Prodrugs Siderophores
Carbapenem-oxazolidinones
Oral Gyrb/ParE dual binding inhibitor
AMPs prodrugs
Awareness and knowledge of antibiotic prescribing
Table 2. Locations of CB1 and CB2 receptors in the human body.
Table 2. Locations of CB1 and CB2 receptors in the human body.
Receptor type Location Sublocation
CB1 Central nervous system (CNS) Hippocampus, cerebellum, basal ganglia, cortical regions
Olfactory areas
Peripheral nerve terminals
Extra-neuronal sites		 Eye, vascular endothelium, adipose tissue, lungs, liver
Spleen, kidneys, uterus, prostate, testis, stomach, placenta
Skeletal, muscles
CB2 Peripheral immune system tissues Spleen, tonsils, thymus, lymph nodes
Peripheral immune system cells B cells, natural killer cells, monocytes, macrophages
Neutrophils, CD8+ T cells, CD4+ T cells
CNS * Cerebellum, olfactory tubercle, striatum
Thalamic nuclei (hippocampus and amygdala)
* Under certain circumstances, most notably during inflammation.
Table 3. Selectivity of some SCs for CB1 and CB2 receptors, and their effects.
Table 3. Selectivity of some SCs for CB1 and CB2 receptors, and their effects.
SCs Binding affinity Effects Refs.
CB1 (Ki, nM) CB2 (Ki, nM)
Dronabinol * 15 51 Appetite stimulant
Psychotropic effects
Analgesic
↓ Nausea
Antiemetic		 [37]
Methanandamide (AM-356) 20 815 [38]
SR144528 280 0.1 Anti-inflammatory
Analgesic
↓ Neuropathic pain		 [30]
Cannabinor #
(PRS-211,375)		 5585 17.4 [39]
CP47,597 2.1 (Kd) 56 Analgesic [30]
JTE907 490 2.2 Anti-inflammatory [30]
JWH133 680 3.4 ↓↓ Neurotoxicity
Anti-inflammatory
↓ Alzheimer symptoms		 [30]
AM1241 272 3.4 Analgesic effects
↓ Hyperalgesia
↓ Allodynia
Amyotrophic lateral sclerosis		 [30]
GW405,833 8640 7.2 ↓ Hyperalgesia
↓ Allodynia		 [30]
L-759,633 1604 9.8 Analgesic
Antianxiety
Antidepressant
Anti-inflammatory
↓ Alzheimer symptoms		 [30]
JWH139 2290 14
HU308 115000 23
AM630 3795 32
HU-210 0.061 0.52 [40]
L-759,656 4888 ↑11.8 [41]
WIN 55,212-2 1.9 Analgesic
Anti-inflammatory
↓ Alzheimer symptoms		 [42]
JWH015 383 13.8 Analgesic
Anti-inflammatory		 [43]
WIN 48,098 (Pravadoline) 4.9 (IC50) Analgesic
Anti-inflammatory		 [44]
Ki = Defined kinetically as the ratio of rate constants koff/kon for the binding of a ligand to the receptor. This is the same as Kd; IC50 = the concentration of ligand required to saturate half of the receptor; * Approved by the FDA as safe and effective for HIV/AIDS-induced anorexia and chemotherapy-induced nausea and vomiting only; # failed in Phase IIb human clinical trials due to lack of efficacy.
Table 4. The most relevant cannabinoids which were in the past or recently assayed to assess their antimicrobial properties.
Table 4. The most relevant cannabinoids which were in the past or recently assayed to assess their antimicrobial properties.
Precannabinoids Cannabinoids Synthetic compounds
Cannabichromenic acid (CBCA) Cannabichromene (CBC) * Δ11-THC ** S
Me-CBD
Me-CBG
Ac-CBD
Ac-CBG
PhEO-CBD
PhEO-CBG
MeO-CBD
MeO-CBG
Abn-CBD
Abn-CBG
Carmagerol °°
BP-CBD
CBC isomer (ICBC)
CBC-Co
CBC-C1
ICBC-Co
Cannabidiolic acid (CBDA) Cannabidiol (CBD) *
Cannabigerolic acid (CBGA) Cannabigerol (CBG) *
Δ9-Tetrahydrocannabinolic acid A (THCAA) Δ9-Tetrahydrocannabinol (Δ9-THC) *
Δ9-Tetrahydrocannabinolic acid B (THCAB)
Δ9-tetrahydrocannabivarin acid (THCVA) Δ9-tetrahydrocannabivarin (THCV) *
Cannabidivarinic acid (CBDVA) Cannabidivarin (CBDV) *
N.T. Δ8-THC **N
Cannabicyclol (CBL) #
(±)11-NCTHC °
(±)11-HTHC §
Anantamide (ANA) ***,$
Arachidonyl serine (AraS) $
* From decarboxylation of acidic pre-cannabinoids; N.T. = not tested; **N natural isomer of Δ9-THC; **S synthetic isomer of Δ9-THC; Me-CBD = mono- di-methylated derivatives of CBD (Figure 10); Me-CBG = mono- di-methylated derivatives of CBG (Figure 10); Ac-CBD = acetylated derivative of CBD (Figure 10); Ac-CBG = acetylated derivative of CBG (Figure 10); PhEO-CBD = phenyl-ethyl ester of CBD (Figure 10); PhEO-CBG = phenyl-ethyl ester of CBG (Figure 10); MeO-CBD = methyl ester of CBD (Figure 10); MeO-CBG = methyl ester of CBG (Figure 10); Abn-CBD = abnormal (orto-isomer) CBD (Figure 10); Abn-CBG = abnormal (orto-isomer) CBG (Figure 10); °° polar analogue of CBG (Figure 10); BP-CBD = bis-prenylated analogue of CBD (Figure 10); ICBC,CBC-Co, CBC-C1, ICBC-Co = isomers and analogous of CBC whose structures are available in Figure 10; # degradative product of CBC; ° not active secondary metabolite of THC which is formed in the body after cannabis is consumed; § main active metabolite of THC, which is formed in the body after Δ9-THC is consumed; *** also known as N-arachidonoyl-ethanolamine (AEA); $ ECs.
Table 5. Antimicrobial effects against bacteria and fungi reported in the past and recently for several cannabinoids expressed as MICs (µg/mL) if not differently specified.
Table 5. Antimicrobial effects against bacteria and fungi reported in the past and recently for several cannabinoids expressed as MICs (µg/mL) if not differently specified.
Compounds Pathogens MIC * (µg/mL) Ref. Comments
Δ9-THC S. aureus 1-5 [58] Binding to plasma proteins
↓ Activity on Gram-negative
Psychotropic
Streptococcus pyogenes 5
S. milleri 2
S. faecalis 5
S. aureus 1 [59]
EMRSA 0.5-2
S. aureus SA-1199B 2
S. aureus RN-4220 1
S. aureus XU212 1
MRSA USA300 2 [17]
Δ9-THC acid A (THCAA) MRSA USA300 4 [17] Binding to plasma proteins
↓ Activity on Gram-negative
Not psychotropic
↑ Therapeutic potential
↑ Effects without the carboxylate moiety
S. aureus 4 [59]
EMRSA 4-8
S. aureus SA-1199B 8
S. aureus RN-4220 4
S. aureus XU212 8
Δ8-THC MRSA USA300 2 [17] Binding to plasma proteins
↓ Activity on Gram-negative
Psychotropic
Δ11-THC MRSA USA300 2 [17]
Δ9-THCV MRSA USA300 4 [17] Lack psychotropic effects
↑ Therapeutic potential
↓ Activity on Gram-negative
↑ Effects without the carboxylate moiety
THCV acid (THCVA) MRSA USA300 16 [17]
CBD S. aureus 1 [60] Binding to plasma proteins
↓ Activity on Gram-negative
Antiepileptic
Anti-inflammatory
Not psychotropic
↑ Therapeutic potential
1-5 [58]
0.5 [59]
1.25 [61]
EMRSA 1 [59]
S. aureus SA-1199B
S. aureus RN-4220
S. aureus XU212
MRSA USA300 2 [17]
4 [62]
S. epidermidis 2 [60]
S. pyogenes 2 [58]
S. milleri 1
S. faecalis 5
MRSE 4 [62]
Listeria monocytogenes 4
E. faecalis 8
E. coli 1.25 [61]
CBN MRSA USA300 2 [17] Binding to plasma proteins
↓ Activity on Gram-negative
Weakly psychotropic
S. aureus 1 [59]
EMRSA
S. aureus SA-1199B
S. aureus RN-4220
S. aureus XU212
Abn-CBD S. aureus 1 [59] Binding to plasma proteins
↓ Activity on Gram-negative
Not psychotropic
↑ Therapeutic potential
EMRSA
S. aureus SA-1199B
S. aureus RN-4220
S. aureus XU212
CBC B. subtilis 0.39 [63] ↓ Activity on Gram-negative
Not psychotropic
↑ Therapeutic potential
In case of acid compounds: ↑ Effects without the carboxylate moiety
S. aureus 1.56
Mycobacterium smegmatis 12.5
Candida albicans N.T.
Saccharomyces cerevisiae 25
Trichophyton mentagrophytes 25
MRSA USA300 8 [17]
EMRSA 2 [59]
S. aureus 2
S. aureus SA-1199B 2
S. aureus RN-4220 2
S. aureus XU212 1
CBCA MRSA USA300 2 [17]
CBC isomer (ICBC) B. subtilis 0.78 [63]
S. aureus N.T.
M. smegmatis 25
C. albicans 50
S. cerevisiae N.T.
T. mentagrophytes N.T.
CBC-Co B. subtilis 6.25
S. aureus 12.5
M. smegmatis 12.5
C. albicans 50
S. cerevisiae 25
T. mentagrophytes 25
CBC-C1 B. subtilis 3.12
S. aureus 3.12
M. smegmatis 3.12
C. albicans N.T.
S. cerevisiae 6.25
T. mentagrophytes 6.25
ICBC-Co B. subtilis 6.25
S. aureus 12.5
M. smegmatis 12.5
C. albicans 12.5
S. cerevisiae N.T.
T. mentagrophytes 6.25
CBDA S. aureus 2 [59] ↑ Effects without the carboxylate moiety
↓ Activity on Gram-negative
Not psychotropic
↑ Therapeutic potential
↑ Effects without the carboxylate moiety
EMRSA
S. aureus SA-1199B
S. aureus RN-4220
S. aureus XU212
S. epidermidis 4 [60]
S. aureus 2
MRSA USA300 16 [17]
4 [60]
CBGA MRSA USA300 4 [17] Not psychotropic
↑ Therapeutic potential
↑ Effects without the carboxylate moiety
↓ Activity on Gram-negative
EMRSA 2-4 [59]
S. aureus 4
S. aureus SA-1199B 4
S. aureus RN-4220 2
S. aureus XU212 4
CBG Streptococcus mutans 2.5 [64] Not psychotropic
↑ Membrane permeability
Cause membrane hyperpolarization
↓ Membrane fluidity
Not psychotropic
↑ Therapeutic potential
↓ Activity on Gram-negative
S. sanguis 1
S. sobrinos 5
S. salivarius 5
MRSA USA300 2 [17]
S. aureus 1 [59]
EMRSA 1-2
S. aureus SA-1199B 1
S. aureus RN-4220 1
S. aureus XU212 1
C. albicans 3 a; (4)b [65]
S. cerevisiae 6 a; (2)b
T. mentagrophytes 5 a; (4)b
Abn-CBG S. aureus 1 [59]
EMRSA 2
S. aureus SA-1199B 2
S. aureus RN-4220 1
S. aureus XU212 0.5
CBDV MRSA USA300 8 [17] Not psychotropic
↑ Therapeutic potential
↓ Activity on Gram-negative
CBDVA MRSA USA300 32 [17] Not psychotropic
↑ Therapeutic potential
↑ Effects without the carboxylate moiety
↓ Activity on Gram-negative
CBL MRSA USA300 >32 [17] Not psychotropic
↑ Therapeutic potential
(±) 11-NCTHC
(±) 11-HTHC MRSA USA300 >32 [17] Psychotropic
ANA MRSA > 256 ** [66] Psychotropic
↓ Membrane potential in bacteria
↓ Bacteria adhesion capacity
↓ Cells aggregation capacity
Not bactericidal
↓ Activity on Gram-negative
64***
(51-54) #
AraS MRSA 32->256** [66] Psychotropic
Neuroprotective
↓ Activity on Gram-negative
Affect membrane potential in bacteria
↓ Bacteria adhesion capacity
↓ Cells aggregation capacity
Not bactericidal
64***
(33-61) #
* After 24 hours exposure on bacteria, after 48 hours exposure on fungi; a activity was recorded as the width (in millimeters) of the inhibition zone measured from the edge of the agar well to the edge of the inhibition zone; b inhibition zone of Amphotericin B; ** on planktonic cells; *** on biofilm; # percentage of biofilm eradication; SA-1199B = fluoroquinolones-resistant; RN-4220 = macrolides-resistant; XU212 = tetracycline-resistant; MRSE = methicillin-resistant S. epidermidis; S. aureus = ATCC25923 strains; EMRSA = the major epidemic methicillin-resistant S. aureus occurring in U.K. hospitals.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.
Cannabis sativa CBD Extract Exhibits Synergy with Broad-Spectrum Antibiotics against Salmonella typhimurium

Logan Gildea

et al.

,

2022

Cannabis sativa CBD Extract Shows Promising Antibacterial Activity against S. typhimurium and S. newington

Logan Gildea

et al.

,

2022

Susceptibility Patterns in Staphylococcus and Klebsiella Causing Nosocomial Infections upon Treatment with E-Anethole-Rich Essential oil from Clausena anisate

François Nguimatsia

et al.

,

2024

Prerpints.org logo

Preprints.org is a free preprint server supported by MDPI in Basel, Switzerland.

facebook logotwitter logolinkedin logo
MDPI Initiatives
Important Links
Subscribe

Disclaimer

Terms of Use

Privacy Policy

© 2024 MDPI (Basel, Switzerland) unless otherwise stated