Preprint Article Version 1 Preserved in Portico This version is not peer-reviewed

Air Mass Flow and Pressure Optimisation of a Pem Fuel Cell Hybrid System for a Forklift Application

Version 1 : Received: 6 November 2023 / Approved: 7 November 2023 / Online: 7 November 2023 (10:32:16 CET)

A peer-reviewed article of this Preprint also exists.

Radica, G.; Tolj, I.; Lototskyy, M.V.; Pasupathi, S. Air Mass Flow and Pressure Optimization of a PEM Fuel Cell Hybrid System for a Forklift Application. Energies 2024, 17, 120. Radica, G.; Tolj, I.; Lototskyy, M.V.; Pasupathi, S. Air Mass Flow and Pressure Optimization of a PEM Fuel Cell Hybrid System for a Forklift Application. Energies 2024, 17, 120.

Abstract

A study was conducted on the power system of a forklift equipped with PEM fuel cells. A fuel cell assembly relies on several components for proper functioning, and among these, the air compressor holds paramount importance due to its significant energy consumption when compared to other Balance of Plant components. The air supply system, in turn, plays a critical role in ensuring the stable and efficient operation of the entire fuel cell system. To enhance system efficiency, we delved into the impact of varying the stoichiometric ratio of air and air pressure on the validated and optimized power module model. This investigation was carried out under real loading conditions, replicating the conditions experienced by the power module when fuel cells are in use within a forklift. The air compressor, being a pivotal component of a PEM fuel cell system, can be oper-ated at different excess air and pressure ratios, which in turn influence both the fuel cell's performance and the overall efficiency of the power module system. Our research focused on assessing the performance of polymer electrolyte membrane (PEM) fuel cells under different load cycles, adhering to the VDI60 requirements for forklift applications. This comprehensive examination encompassed the system's minimum and maximum load scenarios, with the primary goal of optimizing excess air and pressure ratio parameters, especially under dynamic load conditions. The results revealed that higher air pressures and lower excess air ratios were con-ducive to increasing system efficiency, shedding light on potential avenues for enhancing the performance of PEM fuel cell systems in forklift applications.

Keywords

Air mass flow; pressure; optimization; PEM fuel cell

Subject

Engineering, Mechanical Engineering

Comments (0)

We encourage comments and feedback from a broad range of readers. See criteria for comments and our Diversity statement.

Leave a public comment
Send a private comment to the author(s)
* All users must log in before leaving a comment
Views 0
Downloads 0
Comments 0


×
Alerts
Notify me about updates to this article or when a peer-reviewed version is published.
We use cookies on our website to ensure you get the best experience.
Read more about our cookies here.