Logistical Challenges
Once this 700 pound Giant Custom Inflatable Lobster was completed and shipped to the Taste Of Maine Restaurant it had to be lifted onto the rooftop with the assistance of a giant crane so that the installation could be possible. Our talented installation crew had to place about 25 heavy duty eyebolts around the perimeter of the rooftop in strategic locations by way of a giant boom lift. There were well over 60 tethers that were used to secure the Giant 70 long by 55’ wide Inflatable Lobster. All ropes had to be tightened just right in order to evenly balance the pull tension of each tether so that the Giant Inflatable Lobster can be able to sustain wind conditions as high as 40 miles per hour. Two 110 volt, 1 horsepower continuous air blowers were used in order to sustain the internal air pressure for the Inflatable Lobster and both must be kept running 24 hours a day. A dedicated 20 amp breaker was used for each blower to prevent any type of circuit breaker interruptions.Once all the ropes were tied and secured the inflation process took a little over 5 minutes.One of the Installers mentioned “How impressive it was to witness first hand one of the largest Inflatables we’ve ever built, it was an incredible sight to see”. They also noticed how quickly this Giant Inflatable Lobster attracted so much attention once it was fully inflated. Not only did it attract many passing by foot or vehicle who stopped to take pictures the news media both newspaper and TV we’re out in force almost immediately to cover the story of the world’s largest Inflatable Lobster. This certainly was an attraction worth seeing. If you’re ever near the city of Woolwich in the State of Maine pass on by and see this great Inflatable work of art first hand, you won’t be disappointed.
Why work with us?
Fortunately Promotional Design Group and Creatable Inflatables have been blessed to have the best Inflatable Design team in the world. It’s almost impossible to find Inflatable designers that can create such impressive, inspiring and realistic customized Inflatable works of art and that can take on a challenge that requires lots of detail, creativity and talent than our Inflatable Design team.
Our talent doesn’t end with our Inflatable Design Team. As a matter of fact, for the past 35 years we have been creating some of the most incredible inflatable creations. These range from large inflatable structures (tents, domes, arches, tunnels, etc..) to custom inflatables like props and replicas. We are also able to create inflatables from scratch and even color match any branding guidelines for the inflatables to match your other promotional products. We also have an eclectic staff in our production department with many years of experience, skill and talent. This entire Inflatable design process involves having an all star team in every department who can make this work in unison, from our Inflatable design team, to our reliable & efficient printing department who can scale and print almost any patterns for any customized Inflatable to whatever size desired to our sewing department who are able to assemble these giant jigsaw puzzles and just about solve almost any sewing problem that needs attention. Our talented Design & Production staff makes these giant custom Inflatable masterpieces almost on a daily basis.
Both Promotional Design Group and Creatable Inflatables have been around since1984 and we’re proud to say that we manufacture all our Inflatables in the United States in the sunny State of California and in the beautiful City of Los Angeles. If your ever in the City of Los Angeles and are looking for an Inflatable company nearby, come on over and we’ll give you a tour so you can see our manufacturing facility first hand and also witness our state of the art equipment that we use to manufacture all our Custom Shaped Inflatables.
Give us a call or send an e-mail with your Inflatable Design request and we will provide you with a 3D rendering of how great your Custom Inflatable will look.
