ELOXYCHEM will establish a electrochemical oxidation process that will replace existing thermochemical processes that are reliant on imported materials such as nitric acid and imported fossil-fuels.
The project targets R&D challenges to the industrialisation of additive manufacturing (AM) technology for composite parts containing either short or continuous fibre-reinforced thermoplastics.
The SEAD project will explore the potential of plant-inspired pyrogallol-based compounds as adhesion anchoring sites.
SEARCULAR’s core objective is the reduction of marine litter and microplastics generated by European fisheries (demersal trawlers, demersal seiners, tropical tuna purse seiners) and to promote circular economy practices in the fishing industry.
The main objective of PurPest is to control serious plant pests during import and to manage them in the field by developing a unique concept enabling pest detection in a timely and non-invasive manner. One goal is to increase the inspection of plants...
The Sure2Coat project will demonstrate the benefit of surface treatments with respect to corrosion protection and to improved heat transfer properties.
MatCHMaker looks at methods and tools for advanced materials development towards a low-carbon and clean industry with new and sustainable materials.
The COFFEE project aims to develop durable, high performance Anion Exchange Membranes (AEMs) for low-cost electrolysers and batteries.
The increasing market of the electric vehicles and the growing importance of renewable energy sources calls for next generation high efficiency batteries.
The TailAd project will develop new characterization methods utilizing advanced instrumentation that will provide the capabilities to study adhesion characteristics of paints in much greater detail.
The CORE project aims at developing cost-efficient polymer-based conductive coatings that will prevent corrosion of metallic bipolar plates and increase the lifetime of PEM fuel cells and electrolysers.
VIPCOAT seeks to make the development and production of corrosion protection technologies more sustainable, economical and faster.
CO2SMOS aims to develop cost-effective routes to produce high added-value bio-based chemicals from bio-based industrial CO2 emissions and renewable energy sources (green H2 and biomass).
PLASTICENE will build new knowledge and address processes important for increased plastic circularity and effective plastic waste management with the aim of supporting improved plastic material utilization and protecting the environment from plastic...
CO2-Hybrid is focusing on the demonstration of next level CCS technologies in major CO2-emitting industries. The main objective of CO2-Hybrid is the scale up and demonstration of a hybrid solution based on a membrane pre-concentration step and...
The objective of NYMPH project is to develop novel membranes for wastewater treatment with improved antifouling characteristics and high separation performance compared to the state-of-the-art membranes. The lower fouling would result in reduced...
Ice formation and accretion present serious, sometimes catastrophic, safety issues in industrial applications where the use of composite components has already become common, e.g. wind turbine blades, aircrafts, UAVs, but also in the case of electric...
REALISE will develop carbon capture, utilization and storage (CCUS) strategies for oil refineries-centered industrial clusters and demonstrate in a pilot scale an absorption technology based on novel solvent for cost-efficient and environmentally...