1 / 4

ORTHOGRAPHIC PROJECTION

ORTHOGRAPHIC PROJECTION. TECHNOLOGY. Prepared by G. C. Accom SUITABLE for GRADE 9 Learners. USE A SHEET OF LINED PAPER AND FOLLOW THE INSTRUCTIONS. PLEASE NOTE: We are using lined paper to make the drawings easier for you. 2 nd Quadrant. 1 st Quadrant.

rhys
Download Presentation

ORTHOGRAPHIC PROJECTION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ORTHOGRAPHIC PROJECTION TECHNOLOGY Prepared by G. C. Accom SUITABLE for GRADE 9 Learners

  2. USE A SHEET OF LINED PAPER AND FOLLOW THE INSTRUCTIONS PLEASE NOTE: We are using lined paper to make the drawings easier for you. 2nd Quadrant 1st Quadrant • DRAW A HORIZONTAL LINE IN THE MIDDLE OF THE PAGE. 2. USE YOUR 45⁰ SET SQUARE TO DRAW A VERTICAL LINE IN THE CENTRE. 3rd Quadrant 4th Quadrant 3. THE FOUR BLOCKS ON YOUR PAGE ARE CALLED QUADRANTS.

  3. WE WILL BE DRAWING AN ORTHOGRAPHIC PROJECTION OF A CUBE THISMEANS WE WILL BE LOOKING AT THE SAME OBJECT FROM: THE FRONT =  FRONT VIEW Imagine you are the object…YOUR front part, your face etc. will be the front view. Same applies to the object. THE SIDE =SIDE VIEW We are talking of the left side view. Imagine you are the object…YOUR left side, your left arm etc. will be the left view. Same applies to the object. THE TOP =TOP VIEW This is what you see when you look at the object from above --- looking down at the object.

  4. REMEMBER THIS IS YOUR FRONT VIEW. FRONT VIEW YOU ARE NOW GOING TO PROJECT THE SIDE VIEW AND THE TOP VIEW FROM YOUR FRONT VIEW. SIDE VIEW TOP VIEW USE YOUR 45⁰ SET SQUARE TO DRAW THIS LINE Views are always aligned with each other. (Features project from one view to the next)

More Related