Presentation Transcript

1. QUALITY CONTROL IN FEED MANUFACTURING / CURRENT GMP AND PROPER STORAGE FOR QUALITY M. WAN ZAHARI MARDI, P. O. Box 12301, GPO 50774 Kuala Lumpur AND V. RAGHAVAN Sin Heng Chan (EC) Sdn. Bhd.

2. 1. Feed production in Malaysia2. Quality Control in feed manufacturing3. Current GMP4. Proper Storage for Quality

3. Continued reliance on imported raw material for feed production and has increased substantially. Development of feed base alternatives including maize is still at experimental stage. CURRENT POSITION Feed Production

4. Feed manufacturing is the process of combining feed ingredients to form a mixture designed to provide a variety of nutrients in a practical form. • To improve flock uniformity • Improve birds condition c) Stimulate the immune system

5. N utritional quality of feed ingredient is defined by its comparative ability to supply specific nutrients to the target animal – free of physical and chemical contaminants. • Content of Nutrients • Availability of Nutrients • Batch variation • Management of ingredient variation • Genetics / harvesting / processing / storage / transportation / conditions / adulterations. Depends On :-

6. MAIN BENEFITS FROM QUALITY CONTROL • Improved Profits • Increase Market Share • Cost savings in production • Cost savings in Customer Service Department • Fewer Complaints • Lower compensation payments • Customer satisfaction • Enhanced quality image • More disciplined management • Good company morale

7. FEED MANAGEMENT • Increase nutrient density of feed – to compensate the reduced feed intake. • Feed Ca separately to improve shell quality and egg production • Feed low protein diets as increase in protein levels results in increase in heat production • Provide feed during cooler parts of the day • Increase dietary fat – if economical • Increase available phosphorous content • Supplement antifungal compound • Supply synthetic amino acids – when protein is lowered • Vit C at 44 mg/kg of diet or add Sodi-bi-carb-0.03% to improve shell quality • Pelleted feeds – beneficial – increases the M.E. content and increases feed intake

8. FEED • Feed must satisfy :- • Be palatable • Must have good FCR in Broilers • Good egg production in layers • Good egg production / hatchability / fertility in Breeders • Balanced with CP / AA / Energy / Vitamins / Minerals needed at all stages of growth • Free from Toxins (Aflatoxin / Anti Nutritional factors)

9. Feed (cont’d) • Free from harmful bacteria • Free from bad odour / rancidity • Particle size should be suited to birds age group • Feed should be able to store for long – preservation • Anticoccidial drugs of right dosage – Broilers / Pullets • Should not be too mashy or dusty • Less variation in quality • If feed in bulk form, care must be taken to avoid segregation problems

10. FEED INGREDIENTS AND THEIR ANALYSIS • W Weekly • E Every Load

11. ELEMENT IN THE MANAGEMENT OF QUALITY ASSURANCE • QUALITY POLICY • SPECIFICATION SYSTEM • SETTING STANDARDS • ACCEPT / REJECT DECISIONS • SYSTEM IMPROVEMENT • ADMINSTRATION / MOTIVATION

12. EVALUATION OF FEED QUALITY • Variations in incoming feed ingredients • Variations in feed mixing efficiency • Variations in efficiency of delivery of mixed feed Mixing point Animals • Variations in analytical procedures

13. Processing & Production Quality • Size of grains • Size of pellets • Colour of pellets • Smell of feed • Mixing of ingredients • Bagging – stiching – weight • Cards – specifications • Special instructions • Any contaminations – insects - weevils

14. QUALITY CONTROL PROCEDURES • Visual Inspectioon – On Arrival For :- • a) Wetness • b) Odour • c) Moldiness • d) Infestation • - with Insects / Rodents / Excreta • f) Signs of hot spots • Sampling :- • at different intervals when discharge • Physical analysis:- • Damages, Moisture, Size, shape • Instrinsic Quality :- • Crude Protein, Fat, Ash, Fiber • 5. Confirmation of Quality

15. FEEDSTUFFS QUALITY Three Criteria involved :-

16. QUALITY CONTROL • Raw Materials • External :- • Signs of wetness / moldy / caking insect infection / smell / colour. • Sampling – Microscopical – adulteration • Check for Crude Protein / Fat / Ash / Toxins etc. • Reject / Accept

17. Finished Feed • Sampling every batch of production • Check for granulation / mixing properties / pellet size / colour / smell / etc. • Proximate analysis for :- • Protein • Moisture • Fibre • Fat • Ash • Ca • P • Salt • Toxin • Analysis for Amino Acids. • Assay for Vitamins / Drugs. • Check against standards.

18. OBJECTIVES OF QUALITY CONTROL • To make sure that the manufacturing process is functioning properly. • To make sure that the feed manufactured is according to the guaranteed specifications of nutrients. • To make sure that the customer gets for what he is paying for. • To make sure that the feed is palatable, has the desired medication level and free from contamination.

19. CURRENT GOOD MANAGEMENT PRACTICE (CGMP) • Objectives: • To adhere to a current general standard of manufacturing • To ensure that the products meet the intended specifications • To maintain integrity of the product manufactured • To maintain integrity of feed manufacturer • To prevent non-permissible residue levels

20. HANDLING OF FEED ADDITIVES – RECEPT FORM – REQUEST FORM COMPLAINT FILES FOR MEDICATED FEEDS CUSTOMER COMPLAINT FORM WITHDRAWAL FEED FORM FEED LABEL

21. STORAGE OF FEEDSTUFFS • To control the condition of storage • To maintain original quality of the products • To minimize deteriorative changes • Factors affecting storage of feedstuffs • Moisture • Temperature • Oxygen supply • Conditio • Engineering aspects • Bulk storage • Physica barriers • Rodents • Micro-organisms • Birds • Human

22. Procedures To Control Pests Storage must be free from debris – maintain cleanliness Remove and destroy all sweepings and spillage Before intake of commodities – examine for excessive moisture content – insect infestation Moisture high – drying Any form of infestation – reject – fumigate Do not store infested commodities with non infested commodities

23. Store bagged commodities instack for ease of inspection • Label all stacks clearly • Name of commodity • Quantity • Date received into storage • Original • Any control measure done • Inspect all commodities in storage regularly – formoisture accumulation and deterioration • Avoid long term storage • Train a warehouse staff in hygiene management in the warehouse – prime responsibility

24. CONTROL OF RODENTS General hygiene Proofing of premises Trapping Poisoning Treatment with poison Treatment with anticoagulants Follow up treatment Rodent tracking dusts Repellents Fumigation Keeping records

25. STOCKING GRAINS / FEEDSTUFF / MANAGEMENT Be prepared First in first out Routine silo maintenance Clean ingredients before storage Dry before storage Watch for hot spot Ventilation of silo

26. BAGGED GRAIN STORAGE Monitoring – at receipt and periodic inspection – in warehouse Housekeeping – proper sizing, spacing, stacking, labelling, date of receipt Rodent and bird control – more important in bagged grain warehouses

27. MAINTAINING GRAIN QUALITY DURING STORAGE • Component of QMP – Technical - Managerial • Technical component • 1. Inspection – grain quality & facility • Sanitation – cleanliness & orderliness • Grain conditioning – cleaning – drying – cooling • 4. Chemical treatment – surface sprays, space sprays, protectants, • fumigants & rodenticides • (b) Managerial component • Delegation of responsibility – supervision, inspection etc • Documentation – inspection forms (grain / facility), chemical stock • records, chemical use records • 3. Supervision – scheduling – follow-up etc

28. CONCLUSION • Practical infestation control of pests in feedstuffs during storage is an integration of • Adequate drying o the commodity to be stored • Use of suitable storage facilities • Improvement of suitable storage facilities • Improvement of storage facilities to an acceptance standard • Use of aeration / physical methods practicable • Good warehouse keeping • Regular inspection for infestation and deterioration • Use of residual insecticides • Use of commodity protectants • Fumigation if infestation are established

29. THANKYOU