The document describes the methodology used to develop a Campus News Information System Android application. It discusses using the Android SDK, Eclipse IDE, and phpMyAdmin to build the application. The application will use components like Shared Preferences, Notification Manager, and SQLite to store and retrieve data from the campus server. The goal is to create a system that allows students and faculty to access campus information from their Android devices via a HTTP-based connection. This overcomes limitations of prior approaches that used Bluetooth technology.
The document describes the methodology used for an IT capstone project, including requirements specification, analysis specification, design, and development and testing. It discusses the system development life cycle (SDLC) model used, including feasibility study, analysis, design, implementation, testing, and maintenance. For development and testing, it specifically discusses using a spiral lifecycle model with iterative prototyping. Each iteration involved gathering user data, planning the next iteration, and evaluating the design based on prior results before coding and testing the prototype.
Automatic Irrigation System Project ReportEr Gupta
The project implements an automatic irrigation system using soil moisture sensors. Sensors in each agricultural field detect the humidity level in the soil and send signals to a microcontroller. If a field's soil becomes dry, the sensor sends a signal to the microcontroller which then supplies water to that field until the soil moisture level increases again. The system aims to reduce water usage through automated irrigation only when needed.
This document proposes a mobile application for water management in rural and urban areas. Currently, rural areas face problems with irrigation canal maintenance and accessing water resources. Urban areas struggle with water scarcity, leaks, and outdated infrastructure. The proposed application would allow users to view local water sources, complain directly to officials, and improve transparency. It could help resolve issues more quickly than current methods while saving users time, money and resources. The application aims to benefit users and officials through better water management.
This document provides an overview of a research methodology. It describes the research design, locale, and participants of the study. The research design section briefly discusses what type of research design was used. The research locale section describes the community where the research was conducted and where the participants were drawn from. The research participants section lists the people who took part in the study. The document also includes sections on the instruments, materials, and procedures used in carrying out the research study.
This project presents an overhead bridge electromagnetic crane that can automatically measure and place objects on a conveyor belt based on their length and height. The crane uses sensors to detect objects, a microcontroller to process the measurements and control the electromagnet and motors, and can operate either automatically or manually via joystick. It is intended to help automate material handling in industries like shipping, steel mills, and petroleum refineries.
The document describes a final year project to develop a mobile and web application called SpringsVision Events for planning and managing social events. A team of 4 students - Syed Absar Karim, Umair Ahmed, Shafaq Yameen, and Zaid Hussain - presented their project to create an online platform for scheduling events, adding social networking features, and mobile support to the supervisor Mr. Nadeem Mahmood. The project aims to provide a useful tool for personal event management and sharing on social media.
Final project report Snake Game in PythonMuhammad Aziz
This document is a final project report for a Snake game created in Python. It summarizes the key aspects of developing the Snake game, including using Pygame for graphics and sound, storing the snake's segments in an array, generating random food locations, detecting collisions between the snake and food/walls, and increasing the snake's length when it eats food. It also provides flow charts and diagrams to illustrate the movement mechanics and different levels as the snake grows in size. Issues addressed during the project included installing development tools and adding graphics/levels to the game.
This document provides an overview of the Data Tag project, which aims to intelligently tag textual data and web pages based on their semantic context rather than just keywords. It begins with an introduction describing the purpose, system overview, and problem statement. It then discusses requirements such as user characteristics, functional requirements, dependencies, and constraints. The design section covers the functional design using data flow diagrams, database design using Redis, and GUI design. It also describes the coding, testing, installation, user instructions, future work, and provides a summary.
This document provides a project report on an online voting system created by Nitin Bhasin for NIIT. The report includes an introduction to the online voting system, background and significance of the study, objectives, justification, scope, requirements, and database design. It aims to address issues with existing voting methods in India by providing a secure online system for citizens to vote from anywhere using just a voter ID and password.
This document outlines an online voting system project, including its goals to provide an accurate, reliable and redundant-free system for immediate storage of voting information that is easy to operate. It lists topics like the abstract, software and hardware requirements, working overview, user characteristics, advantages and modules. Screenshots are also included of forms for registration, polling, candidate information and results. The conclusion restates the goals of the proposed online voting system.
Gestures are an important form of non-verbal communication between humans and can also be used to create interfaces between humans and machines. There are several types of gestures including emblems, sign languages, gesticulation and pantomimes. Gesture recognition allows humans to interact with computers through motions of the body, especially hand movements. Some methods of gesture recognition include device-based techniques using sensors on gloves, vision-based techniques using cameras, and controller-based techniques using motion controllers. Gesture recognition has applications in areas such as virtual controllers, sign language translation, game interaction and robotic assistance.
This document describes a website project for online voting submitted to a competition. The website allows citizens to vote online and check election results. It was created using HTML5, CSS3, JavaScript, ASP.NET and MS Access. The objectives are to provide election information, information about political parties and leaders, and enable online voting. This would help address issues with traditional voting like long times, booth capturing, and delays in counting ballots. The future potential applications mentioned are expanding it to other elections like Lok Sabha elections.
This document provides a summary of an online student registration system project report. It was submitted by five students to partially fulfill the requirements for a Bachelor of Computer Application degree. The project involved developing a system to allow online registration of students, adding subjects, and maintaining fee structures. The system was designed to make the registration process easier for both administrators and students while saving time and money compared to a manual process.
Web development on web was part of a project in the final year of Engineering to demonstrate the implementation and application of SaaS using Microsoft Silverlight.
The application facilitated creation of web pages without having a need to install any HTML editor based software.
We have designed this website with the purpose of allowing the students to give exams and view their results. This site is an attempt to remove the existing flaws in the manual system of conducting exams.
Students are provided the flexibility to choose among different types of aptitude and programming language tests.
This document presents a project for developing an Attendance Management System. It aims to computerize the traditional method of taking attendance to make it more efficient. The proposed system would allow for easy generation of attendance reports in real-time. It would reduce paperwork and errors compared to the current manual system. The project details the feasibility and features of the proposed computerized system, which would use HTML and require only a desktop/laptop. It also discusses the motivations, challenges and future scope of the attendance management system.
Here are the key elements of a use case diagram:
- Actor: Represents a role that interacts with the system. Examples include employee, manager etc.
- Use case: Represents a discrete unit of functionality that provides value to an actor. Examples include add employee, generate payroll etc.
- Association: Connects an actor to a use case to show that the actor can interact with that use case.
Notations:
- Actor: Stick figure
- Use case: Oval
- Association: Solid line
- System boundary: Rectangle
5.2 Sequence Diagrams:
Sequence diagrams are interaction diagrams that detail how operations are carried out — what messages are sent and when. They are
The document proposes the establishment of three centers: 1) an Aquatic Research and Experimental Breeding Center in Nueva Ecija to study inland fish varieties, improve harvests, and contribute to food security; 2) a Stem Cell Research and Storage Center to study and preserve stem cells; and 3) a Central Luzon Drug Abuse and Alcoholism Rehabilitation Center to treat persons with severe addiction. The centers are envisioned to benefit their respective regions through research, treatment, and economic growth.
The document describes a project report on clustering algorithms for mobile ad hoc networks. It discusses implementing several clustering algorithms in OMNeT++, including the Distributed Clustering Algorithm (DCA) and Distributed Mobility Adaptive Clustering (DMAC) algorithm. The DCA algorithm partitions nodes into clusters based on weights, with nodes joining the cluster of the neighboring node with the highest weight. The document outlines the procedures and messages used in the DCA algorithm. It also briefly mentions studying the DMAC and other clustering algorithms to develop an optimal protocol stack for mobile ad hoc networks.
This document outlines a project to develop an autonomous bicycle that can travel in a straight line at a constant speed without human intervention. It will use sensors to measure the bicycle's steering angle and tilt, along with motors to control the steering and drive the bicycle forward. The project aims to provide a hands-on learning tool for students in a controls class. It describes the bicycle's components, control system design process using modeling and simulation, qualifications of the team members, budget, and schedule. References on bicycle dynamics and control systems are also included.
Attendance management system project report.Manoj Kumar
Attendance management system project report is a document in PDF file. If you have any confusion in your document then you can clear your concepts here.
This document describes a student management system (SMS) developed as an extension to the Hospital Management Information System (HMIS) to manage student records for dental students across government hospitals in Gujarat. The SMS allows for management of admission, fees payment, exam scheduling, result entry and generation of reports. It follows an iterative development approach and uses a multilayer architecture with layers for data, control, business and presentation. Various diagrams like use case, class, entity-relationship and data flow are provided to depict the system. Screenshots demonstrate modules for admission, fees, exam scheduling and results. The system aims to reduce paper work and efficiently manage student information and resources.
Online voting system full thesis project by jahirJahir Khan
“ONLINE VOTING SYSTEM” is an online voting technique. In this system people who have citizenship can vote online without going to any physical polling station. There is a database which is maintained in which all the names of voters with complete information is stored.
In “ONLINE VOTING SYSTEM” a voter can use his\her voting right online without any difficulty. He\She has to be registered first for him/her to vote. Registration is mainly done by the system administrator for security reasons. The system Administrator registers the voters on a special site of the system visited by him only by simply filling a registration form to register voter. Citizens seeking registration are expected to contact the system administrator to submit their details. After the validity of them being citizens of India has been confirmed by the system administrator by comparing their details submitted with those in existing databases such as those as the Registrar of Persons, the citizen is then registered as a voter.
After registration, the voter is assigned a secret Voter ID with which he/she can use to log into the system and enjoy services provided by the system such as voting. If invalid/wrong details are submitted, then the citizen is not registered to vote.
Chapter 12: Cognitive models
from
Dix, Finlay, Abowd and Beale (2004).
Human-Computer Interaction, third edition.
Prentice Hall. ISBN 0-13-239864-8.
http://www.hcibook.com/e3/
My Project Report Documentation with Abstract & SnapshotsUsman Sait
This document describes a restaurant finder application developed for Android phones. It includes snapshots and discussions of the application's key activities. The application allows users to search for restaurants by location and cuisine type. It then displays lists of matching restaurants along with ratings and reviews. Users can view more details about a selected restaurant, including getting directions, viewing the full review online, and calling the restaurant directly from the application.
This document provides an overview of the Data Tag project, which aims to intelligently tag textual data and web pages based on their semantic context rather than just keywords. It begins with an introduction describing the purpose, system overview, and problem statement. It then discusses requirements such as user characteristics, functional requirements, dependencies, and constraints. The design section covers the functional design using data flow diagrams, database design using Redis, and GUI design. It also describes the coding, testing, installation, user instructions, future work, and provides a summary.
This document provides a project report on an online voting system created by Nitin Bhasin for NIIT. The report includes an introduction to the online voting system, background and significance of the study, objectives, justification, scope, requirements, and database design. It aims to address issues with existing voting methods in India by providing a secure online system for citizens to vote from anywhere using just a voter ID and password.
This document outlines an online voting system project, including its goals to provide an accurate, reliable and redundant-free system for immediate storage of voting information that is easy to operate. It lists topics like the abstract, software and hardware requirements, working overview, user characteristics, advantages and modules. Screenshots are also included of forms for registration, polling, candidate information and results. The conclusion restates the goals of the proposed online voting system.
Gestures are an important form of non-verbal communication between humans and can also be used to create interfaces between humans and machines. There are several types of gestures including emblems, sign languages, gesticulation and pantomimes. Gesture recognition allows humans to interact with computers through motions of the body, especially hand movements. Some methods of gesture recognition include device-based techniques using sensors on gloves, vision-based techniques using cameras, and controller-based techniques using motion controllers. Gesture recognition has applications in areas such as virtual controllers, sign language translation, game interaction and robotic assistance.
This document describes a website project for online voting submitted to a competition. The website allows citizens to vote online and check election results. It was created using HTML5, CSS3, JavaScript, ASP.NET and MS Access. The objectives are to provide election information, information about political parties and leaders, and enable online voting. This would help address issues with traditional voting like long times, booth capturing, and delays in counting ballots. The future potential applications mentioned are expanding it to other elections like Lok Sabha elections.
This document provides a summary of an online student registration system project report. It was submitted by five students to partially fulfill the requirements for a Bachelor of Computer Application degree. The project involved developing a system to allow online registration of students, adding subjects, and maintaining fee structures. The system was designed to make the registration process easier for both administrators and students while saving time and money compared to a manual process.
Web development on web was part of a project in the final year of Engineering to demonstrate the implementation and application of SaaS using Microsoft Silverlight.
The application facilitated creation of web pages without having a need to install any HTML editor based software.
We have designed this website with the purpose of allowing the students to give exams and view their results. This site is an attempt to remove the existing flaws in the manual system of conducting exams.
Students are provided the flexibility to choose among different types of aptitude and programming language tests.
This document presents a project for developing an Attendance Management System. It aims to computerize the traditional method of taking attendance to make it more efficient. The proposed system would allow for easy generation of attendance reports in real-time. It would reduce paperwork and errors compared to the current manual system. The project details the feasibility and features of the proposed computerized system, which would use HTML and require only a desktop/laptop. It also discusses the motivations, challenges and future scope of the attendance management system.
Here are the key elements of a use case diagram:
- Actor: Represents a role that interacts with the system. Examples include employee, manager etc.
- Use case: Represents a discrete unit of functionality that provides value to an actor. Examples include add employee, generate payroll etc.
- Association: Connects an actor to a use case to show that the actor can interact with that use case.
Notations:
- Actor: Stick figure
- Use case: Oval
- Association: Solid line
- System boundary: Rectangle
5.2 Sequence Diagrams:
Sequence diagrams are interaction diagrams that detail how operations are carried out — what messages are sent and when. They are
The document proposes the establishment of three centers: 1) an Aquatic Research and Experimental Breeding Center in Nueva Ecija to study inland fish varieties, improve harvests, and contribute to food security; 2) a Stem Cell Research and Storage Center to study and preserve stem cells; and 3) a Central Luzon Drug Abuse and Alcoholism Rehabilitation Center to treat persons with severe addiction. The centers are envisioned to benefit their respective regions through research, treatment, and economic growth.
The document describes a project report on clustering algorithms for mobile ad hoc networks. It discusses implementing several clustering algorithms in OMNeT++, including the Distributed Clustering Algorithm (DCA) and Distributed Mobility Adaptive Clustering (DMAC) algorithm. The DCA algorithm partitions nodes into clusters based on weights, with nodes joining the cluster of the neighboring node with the highest weight. The document outlines the procedures and messages used in the DCA algorithm. It also briefly mentions studying the DMAC and other clustering algorithms to develop an optimal protocol stack for mobile ad hoc networks.
This document outlines a project to develop an autonomous bicycle that can travel in a straight line at a constant speed without human intervention. It will use sensors to measure the bicycle's steering angle and tilt, along with motors to control the steering and drive the bicycle forward. The project aims to provide a hands-on learning tool for students in a controls class. It describes the bicycle's components, control system design process using modeling and simulation, qualifications of the team members, budget, and schedule. References on bicycle dynamics and control systems are also included.
Attendance management system project report.Manoj Kumar
Attendance management system project report is a document in PDF file. If you have any confusion in your document then you can clear your concepts here.
This document describes a student management system (SMS) developed as an extension to the Hospital Management Information System (HMIS) to manage student records for dental students across government hospitals in Gujarat. The SMS allows for management of admission, fees payment, exam scheduling, result entry and generation of reports. It follows an iterative development approach and uses a multilayer architecture with layers for data, control, business and presentation. Various diagrams like use case, class, entity-relationship and data flow are provided to depict the system. Screenshots demonstrate modules for admission, fees, exam scheduling and results. The system aims to reduce paper work and efficiently manage student information and resources.
Online voting system full thesis project by jahirJahir Khan
“ONLINE VOTING SYSTEM” is an online voting technique. In this system people who have citizenship can vote online without going to any physical polling station. There is a database which is maintained in which all the names of voters with complete information is stored.
In “ONLINE VOTING SYSTEM” a voter can use his\her voting right online without any difficulty. He\She has to be registered first for him/her to vote. Registration is mainly done by the system administrator for security reasons. The system Administrator registers the voters on a special site of the system visited by him only by simply filling a registration form to register voter. Citizens seeking registration are expected to contact the system administrator to submit their details. After the validity of them being citizens of India has been confirmed by the system administrator by comparing their details submitted with those in existing databases such as those as the Registrar of Persons, the citizen is then registered as a voter.
After registration, the voter is assigned a secret Voter ID with which he/she can use to log into the system and enjoy services provided by the system such as voting. If invalid/wrong details are submitted, then the citizen is not registered to vote.
Chapter 12: Cognitive models
from
Dix, Finlay, Abowd and Beale (2004).
Human-Computer Interaction, third edition.
Prentice Hall. ISBN 0-13-239864-8.
http://www.hcibook.com/e3/
My Project Report Documentation with Abstract & SnapshotsUsman Sait
This document describes a restaurant finder application developed for Android phones. It includes snapshots and discussions of the application's key activities. The application allows users to search for restaurants by location and cuisine type. It then displays lists of matching restaurants along with ratings and reviews. Users can view more details about a selected restaurant, including getting directions, viewing the full review online, and calling the restaurant directly from the application.
Health Prediction System - an Artificial Intelligence Project 2015Maruf Abdullah (Rion)
This document proposes the development of a health prediction system that allows users to get guidance on health issues through an online intelligent healthcare system. It will include features like patient and doctor registration and login, disease prediction based on entered symptoms, doctor search, and admin functions like adding doctors and diseases. The system will use data mining techniques to predict illnesses based on entered symptoms. It will provide a way for patients to get medical advice online when doctors are unavailable. The proposal outlines the requirements, workflow, advantages and disadvantages of the system.
The document provides guidance on formatting requirements for APA style papers according to the 6th edition of the APA style manual. It discusses the structure and key sections of APA style papers, including the title page, abstract, body, references, and headings. It also covers formatting requirements for in-text citations and reference lists, as well as types of articles published in APA journals like empirical studies, literature reviews, theoretical papers, and case studies.
This document proposes a system to automatically recharge mobile phones through microwave transmission as the phone is being used. The system would transmit microwave signals from an antenna along with voice signals. Mobile phones would require minor additions like a sensor, rectenna, and filter to receive the microwave energy and use it to charge the phone battery. This would eliminate the need for separate chargers and allow the phone to charge as it is being used through voice calls. Manufacturers could remove talk time and battery life from phone specifications as a result.
The document discusses stepper motor control using a PLC. It provides details about how stepper motors operate by energizing electromagnets in sequence to rotate the motor shaft in steps. It then discusses PLC components, applications, types available and specifications of a Siemens CPU 226 PLC that can be used to control a stepper motor.
This document contains a mini project report on an online women's shopping system. It includes an abstract, contents page, and 5 chapters that cover the introduction, analysis, design, implementation, and screenshots of the system. The system allows customers to browse and purchase products online without visiting a physical shop. It uses technologies like HTML5, JavaScript, CSS, PHP for the frontend and backend, and MySQL for the database. The system has two user types - customers and administrators. Customers can view products, search, and make purchases. Administrators control the database, add/remove products, and generate reports.
Online chatting allows users to communicate in real-time through typed messages. It works using chat servers that allow messages to be quickly received and posted, and chat clients that users download to connect to servers and see messages. There are three main types of online chat - web-based chat rooms where users discuss topics, instant messaging between contacts, and Internet Relay Chat involving joining channels. Asynchronous chat like forums allow time delays between responses. While chatting connects users, it also has risks like not knowing other users' identities and potential for cyberbullying.
This project analyzes the financial performance of Tiruchirapalli District Central Cooperative Bank Ltd from 2006-2011. The objectives are to analyze the bank's financial position and identify strengths and weaknesses by establishing relationships between balance sheet and profit/loss items. Secondary data from annual reports are used to calculate ratios analyzing profitability, liquidity, leverage, and turnover. Ratios show the bank follows high debt-equity and creditors are owed for nearly a year. The cash turnover is also insufficient. The study recommends reducing debt capital, providing security to creditors, and increasing sales to reduce losses. Tables and charts are used to present the ratio analyses, fund flow statements, and cash flow statements for each year.
This document provides a design report for an online photo processing system. It includes requirements, UML diagrams, and a prototype interface. The system allows users to upload digital photos, specify print sizes and quality, receive feedback from an expert if needed, and pay electronically to have their photos printed and shipped. UML diagrams include use case and class diagrams that outline the key system functions and interactions between users, administrators, servers and printers. A prototype screenshot demonstrates the initial user interface design.
Android College Application Project Reportstalin george
The document describes a mini project report submitted by four students for their Bachelor of
Technology degree. It outlines the development of an Android application called "AISAT.apk" that
serves as a mobile version of the Albertian Institute of Science and Technology's official website. The
application allows students, parents, and others to access information about the college, receive
notifications, and view navigation directions to the campus on their mobile devices. It includes sections
describing the product scope, features such as authentication and notifications, interface requirements,
and system design.
This tool is provided to assist you in making a poster for the poster session during the European Association of Urological Nurses (EAUN) Annual Meeting.
This document is a project report submitted by Pragnya Dash to fulfill the requirements for a Bachelor of Technology degree in Information Technology from the International Institute of Information Technology in Bhubaneswar, India. The report details the development of an online shopping system under the guidance of Prof. Sabyasachi Patra. It includes chapters on project analysis, feasibility study, software requirements specification, selected software, design considerations, testing, implementation and future improvements. The selected software for developing the system includes Microsoft Visual Studio, .NET Framework, C# and ASP.NET.
Chapter 12: Abstract ( english for writing research papers)Hafiza Abas
This document provides guidance on writing abstracts for research papers and conference presentations. It discusses the four main types of abstracts and recommends using a structured format that addresses why the research was conducted, how it was done, the main results, and implications. The document advises beginning abstracts with a brief statement of the research and key findings to attract readers' interest. It also provides tips on style, structure, word choice and avoiding unnecessary details to ensure abstracts effectively summarize the full paper or presentation.
Planning the analysis and interpretation of resseaech dataramil12345
The document outlines the researcher's plan for analyzing qualitative and quantitative data collected in a study. It discusses analyzing both types of data, including describing data, identifying typical and atypical findings, and answering research questions. Methods for analyzing qualitative data include historical analysis, inductive analysis, deductive analysis, and content analysis. Quantitative data analysis relies on statistical techniques to summarize data, identify similarities and differences between groups, and test hypotheses. Common statistical analyses include descriptive analysis, univariate analysis, bivariate analysis, multivariate analysis, and comparative analysis. The document also provides guidance on choosing appropriate statistical tests based on research questions, data type, and hypotheses.
How to write a good abstract for a research paperEssayAcademy
as you know writing a good abstract for a research paper is really important and we offer you to watch this presentation and read an article https://essay-academy.com/account/blog/how-to-write-a-good-abstract-for-a-research-paper
Design and Implementation of a Web Based Access Control SystemSerhan
This document summarizes a student project to design and implement a web-based access control system. The project aimed to create a flexible role-based system using a client-server architecture to securely store user credentials and control access. Key aspects included using MIFARE Plus contactless smart cards and a tablet card reader for mobility and security, a web hosting service for the server-side applications, and a MySQL database. Programming languages included HTML, CSS, PHP, MySQL, and Java for the Android tablet application. The implemented system provides authentication in a role-based environment, monitoring of entries, and administration of user, permission, and location databases through a graphical user interface.
This document describes an electricity monitoring and control project. The project aims to provide an easy to use interface for customers to remotely control and monitor appliances and electricity consumption. Key features include password protected access, portable USB connectivity, automatic time-based switching of appliances, and monitoring of electricity usage and costs. The system is designed to encourage energy conservation through making monitoring and control convenient and accessible.
"VisiLock: Smart Face Access System" is a college project I developed to enhance security using face recognition and IoT technology. It integrates an ESP32-CAM module, a face recognition algorithm, a door lock mechanism, and a web-based application for remote access control. The system captures and processes images to grant access upon successful recognition, eliminating the need for physical keys while providing real-time control via Wi-Fi.
Mini Projects for Electronics and Communication Engineering.pdfjagan477830
The document outlines several mini projects for electronics and communication engineering students to apply their theoretical knowledge practically. It describes projects to create a wireless weather monitoring system, an automatic room light controller with visitor detection, a Bluetooth-based home automation system controlled by a smartphone app, wireless power transmission between coils, a voice-controlled robot, and a digital code lock security system. The projects involve components like microcontrollers, sensors, wireless modules, and aim to demonstrate practical applications of concepts taught in class.
Water Level Monitoring System using IOTIRJET Journal
This document describes an Internet of Things (IoT) based water level monitoring system that uses ultrasonic sensors and a microcontroller to detect liquid levels in containers and send the data via Wi-Fi. It aims to prevent water wastage by informing users when the liquid reaches certain levels through an LCD screen or web page. The system activates a buzzer alarm when the maximum level is crossed. It allows remote monitoring of water levels to help conserve water resources.
Advanced Security System for Bank Lockers using Biometric and GSMIRJET Journal
This document proposes an advanced security system for bank lockers using biometric authentication and GSM technology. The system aims to provide more secure access to bank lockers than traditional key-based systems. It works by enrolling users through fingerprint scanning and storing their fingerprint data and mobile number in a database. When a user wants to open their locker, the system verifies their identity by matching their fingerprint and sends a one-time password via SMS to their registered mobile number. The user then enters this password to unlock the locker, providing two-factor authentication through biometrics and mobile verification. The system is designed to address security issues with lost or duplicated keys and keep pace with digital authentication methods.
This document outlines the key aspects of a proposed system called Share Snippets. It includes sections on introduction and purpose, existing and proposed systems, requirements analysis, architecture, design, and conclusions. The proposed system aims to create a community for users to share digital content such as books, software, songs and videos in one place. It analyzes functional and non-functional requirements, outlines the technical architecture using web services and Flex, and provides design diagrams including use case diagrams and class diagrams.
Best Embedded Systems Projects Ideas In 2015elprocus
We provide you the Best Embedded Systems Projects Ideas In 2015. You can choose the best of your choice and interest from the list of topics we suggested. All new project ideas that are appearing focuses to improve the knowledge of Engineering students.
https://www.elprocus.com
Visit our page to get more ideas on Best Embedded Systems Projects Ideas In 2015 these ideas developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
https://technoelectronics44.blogspot.com/
AUTOMATIC WATER DISPENSER full document, it very helps for everyone who studies engineering as ELECTRONIC, STUDENTS. it has a circuit diagram and code for easily implement
Smart glasses report for computer enginnerJayMusical
This document is a project report on "IOT BASED SMART GLASSES" submitted to the Department of Computer Engineering at V.P.M.P. Polytechnic, Gandhinagar. It was prepared by 4 students - Dhruv Patel, Krushna Patel, Jay Patel, and Krish Patel, under the guidance of Mr. Hardik Patel. The report describes the development of a smart glasses system that can control electronic devices like mobile phones and laptops using eye movements instead of hand controls. It discusses the objectives, working, requirements and future expansion of the IOT based smart glasses system.
This document describes an IOT-based aquaponic system that monitors water temperature and level using sensors. The system includes a NodeMCU microcontroller, temperature and ultrasonic sensors, and a relay module. It sends sensor readings to a mobile app via a local Blynk server. The system automatically pumps water to maintain the desired water level. It was tested with a sample pond, recording temperature, water level, and motor actions in a table. The system aims to help farmers easily monitor aquaponic systems remotely using mobile devices. Future work may include oxygen and nitrate sensors, solar power, and live video streaming.
This document summarizes a project to develop a web application to automate the cash sheet transactions for Sri Lanka Post. The current cash sheet process is manual, time-consuming, and inefficient. The new system aims to allow online cash sheet transactions, generate reports, and have different access levels for security. It is expected to reduce time and costs while improving efficiency and productivity for users. A group of 7 students will develop the web application to achieve these objectives and benefits.
Filling is a task carried out by machine that packages cold drinks and water. It also includes volume selection menu through which user can input the desired volume to be filled in bottle.The filling operation is carried out by Programmable Logic Controller (PLC). Because PLC is cost effective, very flexible, reduce complexity, space efficient. By programming PLC we can control entire system Arun Kumar.M | H. Prasanna Kumar"Automatic Bottle Filling System Using PLC" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017, URL: http://www.ijtsrd.com/papers/ijtsrd5953.pdf http://www.ijtsrd.com/engineering/automotive-engineering/5953/automatic-bottle-filling-system-using-plc/arun-kumarm
home automation using Arduino by Aditya Prasadaditya806802
This document presents a home automation project done using Arduino. The objectives are to remotely control basic home functions like lighting, security and appliances through a mobile app from anywhere. This will save electric power and provide better security. The system uses sensors like motion, temperature, humidity and light sensors along with Arduino as the central processing unit. A user-friendly interface allows remote monitoring and control of home environment including temperature, lighting and receiving alerts. Wireless protocols enable connectivity between the system and mobile devices for flexibility of remote home management. The project aims to provide an efficient and adaptable home automation solution for convenience, energy savings and enhanced security.
Identity based encryption with outsourced revocation in cloud computingPvrtechnologies Nellore
This document proposes a scheme for identity-based encryption with outsourced revocation in cloud computing. It introduces a Key Update Cloud Service Provider (KU-CSP) that handles most key generation operations during key issuing and updating, reducing the computation overhead on the Private Key Generator (PKG). The scheme uses a hybrid private key for each user consisting of an identity component from the PKG and a time component updated periodically by the KU-CSP. This allows revocation of compromised users by updating others' time components while keeping the PKG offline. The scheme aims to achieve this outsourced revocation efficiently and securely using the KU-CSP while preventing collusion.
This document describes an electronic workshop project to design a simple and low-cost water level indicator alarm. The alarm uses a circuit to detect the water level in an overhead tank and alert people when the level reaches a certain point. It was designed to be an affordable safety device that could help people and save money compared to commercial products. The project involved learning how to construct circuits, read schematics, and create innovative electronic devices. It was successfully tested and functioned as intended to detect water levels and change an alarm with battery power.
This document describes a proposed smart water management system that uses various sensors and an Arduino microcontroller to monitor and control water usage. The system includes flow sensors to measure water usage, water level sensors to monitor tank levels, a GSM module to send data to the cloud for storage and analysis, and a solenoid valve and relay to control water distribution. The system aims to encourage efficient water usage by tracking individual usage and allowing administrators to manage supply. It provides real-time tank level information on an LCD display and automatically shuts off water flow if usage limits are exceeded to prevent waste. Data on usage is sent to a cloud server using the GSM module for remote monitoring of supply and demand.
Identity-Based Encryption with Outsourced Revocation in Cloud Computing1crore projects
IEEE PROJECTS 2015
1 crore projects is a leading Guide for ieee Projects and real time projects Works Provider.
It has been provided Lot of Guidance for Thousands of Students & made them more beneficial in all Technology Training.
Dot Net
DOTNET Project Domain list 2015
1. IEEE based on datamining and knowledge engineering
2. IEEE based on mobile computing
3. IEEE based on networking
4. IEEE based on Image processing
5. IEEE based on Multimedia
6. IEEE based on Network security
7. IEEE based on parallel and distributed systems
Java Project Domain list 2015
1. IEEE based on datamining and knowledge engineering
2. IEEE based on mobile computing
3. IEEE based on networking
4. IEEE based on Image processing
5. IEEE based on Multimedia
6. IEEE based on Network security
7. IEEE based on parallel and distributed systems
ECE IEEE Projects 2015
1. Matlab project
2. Ns2 project
3. Embedded project
4. Robotics project
Eligibility
Final Year students of
1. BSc (C.S)
2. BCA/B.E(C.S)
3. B.Tech IT
4. BE (C.S)
5. MSc (C.S)
6. MSc (IT)
7. MCA
8. MS (IT)
9. ME(ALL)
10. BE(ECE)(EEE)(E&I)
TECHNOLOGY USED AND FOR TRAINING IN
1. DOT NET
2. C sharp
3. ASP
4. VB
5. SQL SERVER
6. JAVA
7. J2EE
8. STRINGS
9. ORACLE
10. VB dotNET
11. EMBEDDED
12. MAT LAB
13. LAB VIEW
14. Multi Sim
CONTACT US
1 CRORE PROJECTS
Door No: 214/215,2nd Floor,
No. 172, Raahat Plaza, (Shopping Mall) ,Arcot Road, Vadapalani, Chennai,
Tamin Nadu, INDIA - 600 026
Email id: [email protected]
website:1croreprojects.com
Phone : +91 97518 00789 / +91 72999 51536
The evolving technology of the modern age has made it necessary to control the existing technologies efficiently and comfortably. The consumers expect the development of products that are easy to use and are efficient and which can be bought at the lowest possible cost from the industry. The daily difficulties related to lighting automation faced by people ranging from industry professionals to modern day housewives have inspired this project.
The project aims at controlling lighting appliances ranging from industries to sub-urban homes using web-based application at the front end complemented by an end user application developed for the aimed location using ZigBee based network. The other networking technologies like Bluetooth and WiFi consume a lot more energy as compared to ZigBee and are costlier too. The project facilitates controlling lighting appliances in groups as well as individually. The color and density of the lights can also be changed. The quick access feature is provided by the predefined end-user definable presets. The other features include scheduling options, obtaining live feedback, receiving notifications and maintenance pop-ups, bill estimation, power consumption etc.
How To Open The Form View Of Many2many Clicking Tag In Odoo 18Celine George
This slide outlines how to open the form view of a many2many field by clicking a tag in Odoo 18. We can enhance the functionality of the many2many field by allowing users to open the form view of a tag with a simple click.
The Types of Charts in Odoo 18 SpreadsheetCeline George
Let’s discuss about the different types of charts available in the very new version 18 of Odoo’s spreadsheet. We know that, spreadsheets in Odoo are highly useful for data management, reporting, and analysis, allowing us to handle large datasets effectively within the ERP system.
Prelims of the India Quiz hosted by Ripesh Ghosh , Harit Jain and Sameer Upadhyay at Hindu Quizzing Championship 2025 for Manthan - The Quizzing Society of Hindu College
A measles outbreak originating in West Texas has been linked to confirmed cases in New Mexico, with additional cases reported in Oklahoma and Kansas. The current case count is 771 from Texas, New Mexico, Oklahoma, and Kansas. 72 individuals have required hospitalization, and 3 deaths, 2 children in Texas and one adult in New Mexico. These fatalities mark the first measles-related deaths in the United States since 2015 and the first pediatric measles death since 2003.
The YSPH Virtual Medical Operations Center Briefs (VMOC) were created as a service-learning project by faculty and graduate students at the Yale School of Public Health in response to the 2010 Haiti Earthquake. Each year, the VMOC Briefs are produced by students enrolled in Environmental Health Science Course 581 - Public Health Emergencies: Disaster Planning and Response. These briefs compile diverse information sources – including status reports, maps, news articles, and web content– into a single, easily digestible document that can be widely shared and used interactively. Key features of this report include:
- Comprehensive Overview: Provides situation updates, maps, relevant news, and web resources.
- Accessibility: Designed for easy reading, wide distribution, and interactive use.
- Collaboration: The “unlocked" format enables other responders to share, copy, and adapt seamlessly.
The students learn by doing, quickly discovering how and where to find critical information and presenting it in an easily understood manner.
Outline:
Introduction
Learning outcomes
Importance of a search strategy in systematic reviews
Key Steps in developing a search strategy
Conducting the Search – practical session
Managing & documenting the search process
Q&A session
Group assignment
Conclusion
p1.pdf فن الخدمة الجزء الاول د هاني عاطف و د عايده فايزHanyAtef10
PROF/ Hany Atef
Dr/ Ayda Fayez
The Food and Beverage services
"خدمات الأغذية والمشروبات".
جزء « 1»
TYPES OF FOODSERVICE BUSINESS
أنواع أعمال خدمات الطعام
Describe types of commercial foodservice.اشرح أنواع خدمات الطعام التجارية.
Describe the types of institutional foodservice.اشرح أنواع خدمات الطعام المؤسسية.
List the functions that all foodservices must perform.اذكر الوظائف التي يجب أن تقوم بها جميع خدمات الطعام.
Describe how a restaurant concept distinguishes one restaurant from another.اشرح كيف يميز مفهوم المطعم مطعمًا عن آخر.
Explain the importance of customer feedback.اشرح أهمية ملاحظات العملاء
Introduction to Generative AI and Copilot - 2025.04.23.pdfTechSoup
Is your nonprofit looking to enhance its operations and impact? Join us for an engaging and insightful two-part webinar series, where we will dive into the essentials of generative AI, address key AI concerns, and demonstrate how nonprofits can benefit from using Microsoft’s AI assistant, Copilot, to achieve their goals.
This event series to help nonprofits obtain Copilot skills is made possible by generous support from Microsoft.
What You’ll Learn in Part 1:
Discover the benefits of using Microsoft 365 Copilot for nonprofits and how to get started.
Understand the basics of generative AI and its applications.
Learn how to address AI policy, bias, ethics, and security concerns.
HIV: Acquired immunodeficiency syndrome (AIDS), is an ongoing, also called ch...DR .PALLAVI PATHANIA
Human immunodeficiency virus (HIV) is a virus that attacks the body’s immune system. Acquired immunodeficiency syndrome (AIDS) occurs at the most advanced stage of infection.
HIV targets the body’s white blood cells, weakening the immune system. This makes it easier to get sick with diseases like tuberculosis, infections and some cancers.
HIV is spread from the body fluids of an infected person, including blood, breast milk, semen and vaginal fluids. It is not spread by kisses, hugs or sharing food. It can also spread from a mother to her baby.
HIV can be prevented and treated with antiretroviral therapy (ART). Untreated HIV can progress to AIDS, often after many years.
WHO now defines Advanced HIV Disease (AHD) as CD4 cell count less than 200 cells/mm3 or WHO stage 3 or 4 in adults and adolescents. All children younger than 5 years of age living with HIV are considered to have advanced HIV disease.
Ledger Posting in odoo Continental AccountingCeline George
Continental accounting records costs at the time of purchase. This means expenses related to buying products or services are logged when they occur in the ledger. While it follows GAAP principles, users can choose which accounts to debit or credit.
In LDM, We are The Serendipity & Synchronicity of Mind, Body, and Spirit. Our mission: To always maintain union and Chi balance in all projects and courses taught.
♥♥ Yoga is the Umbrella to many related jobs & careers. L.D.M (est 2005), Mia Resorts (est 2010). Departments and Projects rotates
A 2nd Free workshop/Spring Session
REiki - Yoga Money
Session 2
Reiki can clear and heal
anything.
Reiki can be used on objects, animals, situations, remotely, and time/space. This goes into advanced Reiki.
Beyond Basics - Yoga:
—Yoga similar to the arts and fitness can be very healing and therapeutic. The poses, breathing, meditations, and psychology, all contribute to healing many illness aiding remission over time.
Yoga in 2025, has truly evolved and still expanding. As our technology (AI) advances so does many careers on the map featuring Yoga.
(See Presentation for all sections, THX)
Reiki Yoga and Your Money:
I said this within my Blog to my Loyalz, Money is Energy. This is an ongoing topic but there’s updates.
Energy is the new currency. It’s why we get drained so fast. We live in a vampire world for energy resources.
So we have to find creative ways to attract more of this energy. The energy has to be inviting vs repelled. It has to flow effortlessly vs blocked. Sometimes we do this or others around us/environmental.
Practice using Your Creativity:
I personally love art and anything fantasy. However; not all individuals are artists or use their imaginations. When we were children, most of us did this regularly. But, in adulting we assume it’s over and we move on lol. This can really hurt our changes of being creative. Especially in meditations for manifesting. We have to practice our visual skills. The energy is real.
(See Presentation for all sections, THX)
Don’t be shy. Any gift amount helps.
We are a mature 2 businesses operating within Cyberspace. We have since 2007. We started LDM HQ in 2005, Ann Arbor MI US.
To Donate/Tip/Love Offerings:
♥¸.•♥ ♥¸.•♥
- https://ko-fi.com/ldmmia
- CashApp: $ldmmia2 or https://ldmchapels.weebly.com
Remote office/studio located SE. Metro, Mich., US.
Formerly Mount Pleasant, Mid Mich Recent Yrs.
Public Social:
https://www.instagram.com/chelleofsl/
https://x.com/OnlineDrLeZ
Team Chapel: https://ldmchapels.weebly.com
A measles outbreak originating in West Texas has been linked to confirmed cases in New Mexico, with additional cases reported in Oklahoma and Kansas. The current case count is 739 from Texas, New Mexico, Oklahoma, and Kansas. 71 individuals have required hospitalization, and 3 deaths, 2 children in Texas and one adult in New Mexico. These fatalities mark the first measles-related deaths in the United States since 2015 and the first pediatric measles death since 2003.
The YSPH Virtual Medical Operations Center Briefs (VMOC) were created as a service-learning project by faculty and graduate students at the Yale School of Public Health in response to the 2010 Haiti Earthquake. Each year, the VMOC Briefs are produced by students enrolled in Environmental Health Science Course 581 - Public Health Emergencies: Disaster Planning and Response. These briefs compile diverse information sources – including status reports, maps, news articles, and web content– into a single, easily digestible document that can be widely shared and used interactively. Key features of this report include:
- Comprehensive Overview: Provides situation updates, maps, relevant news, and web resources.
- Accessibility: Designed for easy reading, wide distribution, and interactive use.
- Collaboration: The “unlocked" format enables other responders to share, copy, and adapt seamlessly.
The students learn by doing, quickly discovering how and where to find critical information and presenting it in an easily understood manner.
1. PROJECT TOPIC
Design and Construction of Microcontroller Based Electronic Code Lock System with
Extra Administration Password for Multiple Users in Banks
Abstract:
The issue of security is very paramount in any organisation, especially such organisation as a
bank. Therefore we intend to aid in security of the bank by bringing in an electronic code lock
system that involves an individual to enter a password before getting an access to some items, a
particular room or building. This code lock system is not just the normal single-user code lock
system that required a user to insert an already programmed code to gain access to a room or safe;
it is a code lock system that has an administrative password and enable multiple user access. By
this, we mean that there is room for more than a one user with different unique codes to access
the same safe or room. Also, with the kind of security code lock system we intend to implement,
if for any reason a user forgets his password, with the help of the administrator user, the user’s
password can be reset to a default password after which the user can change to a password of his
choice. Lastly the administrator has records of log of activities of a user accessing a safe or a
room at a particular time or whenever a user changes his password and this will further help the
administrator to easily take security measures. The use of microcontroller, keypad, LED display
and some other electronic devices coupled together will help in accomplishment of that. Here an
individual have to enter a password which must have been programmed in assembly language
and this is read from the microcontroller for clarification and verification. From this project, we
hope to build an alternative security system for banks.
GROUP MEMBERS:
EZIGBO CHIAMAKA .S. 2007/147224
EZEONYIDO KINGSLEY .L. 2007/147192
ONUIGBO CYRIACUS .N. 2007/149349
OMEJE UGOCHUKWU .C. 2007/148080
2. PROJECT TOPIC
Microcontroller Based Borehole Water Level Manager With Level Dictator
Abstract:
The need for electronically controlled water level in bore holes, even in the absence of human
being, to ensure constant water distribution is a serious demand. We therefore intend to provide a
solution by constructing an electronic system that has the capability of monitoring the water level
in a reservoir and at the same time supply water to the reservoir when it is below a certain level.
The project involves the use of microcontroller, sensor, water pump, display and an assembly
language program. The sensor monitors the liquid level and displays the water level on a display.
It will also send the signal to the micro controller which processes the signal and trigger on the
water pump to fill up the reservoir when it passes a certain level. With this system we can
automatically control the water level in reservoir.
GROUP MEMBERS:
EZIGBO CHIAMAKA .S. 2007/147224
EZEONYIDO KINGSLEY .L. 2007/147192
ONUIGBO CYRIACUS .N. 2007/149349
OMEJE UGOCHUKWU .C. 2007/148080
NOTE: One among the two topics will of course be approved. Once we are done with the project
(February, 2012), I will be hanging the report and pictures of it with www.slideshare.com, so
keep in touch.
Kingsley Lotanna Ezeonyido
Director,
Graphics and Multimedia Section,
RELACC
[ www.relacc.org.ng ]