Lug Nuts

I have a 2022 Toyota Tacoma just bought 17x9 6x135 bolt pattern what lug nuts do I need ???

 

Depends on what wheel you bought

 

You either need gorllia lug nuts or the stock lugs. There are only 2 types for our trucks.

 

Tapered seat or flat.

You should be able to look at the wheel and know.

 

Double check the bolt pattern is correct first
135 will not fit Toyotas

 

lug nuts wont matter as you won't be able to thread them
you bought the wrong PCD, unless that was a typo

if it was a typo, the other posts advice applies

Siblue beat me to it

EDIT-
OPs post below shows them as double drilled - you should be okay

 

6 x139.7, and 106.1 hub diameter is what you need hub centric.

 

this is what I got guys

 

Leasing wheels? And they don't provide the correct lugnuts?

Again, either have them tell you what you need or go look at the wheel, where the lug will seat, and determine if it's tapered or flat.

 

Didn't even realize leasing wheels and tires was a thing. Looks like it's basically a Rent-A-Center rent to own kinda place.

 

Yep, look around, they're out there.

The exciting things is they carry the latest donk and baller 'rimz' as well.

 

Even Fuel doesn't provide lug nut information.


I suggest you ask Rent A Wheel what is needed. I would suspect that it would be an acorn style lug nut.

 

I’m just wondering if the rims are going to fit done if the guys on here have me worried

 

I must be old. I paid cash for my 4Runner TRD Pro wheels and ordered from BAM Wholesale.

 

According to what you posted and what I found when I looked, they are a dual bolt pattern. 6x135mm & 6x139.7mm rim. They will bolt up.